Precision Rifle Load Development/ Part 1: New Brass Prep
Вставка
- Опубліковано 8 вер 2024
- This reloading video is the first in a series of videos that cover how I approach load development for long range precision rifles. The first step in my load development for any new barrel is to define what I want out of it, and prep an appropriate amount of new brass for the project.
The project I'll be using as an example is my new competition rifle chambered in 260 Remington. I built this rifle for competing in PRS-type matches, so it needs to be accurate, consistent, and reliable. Load development for it will focus on those requirements.
This video covers topics such as weight-sorting brass, inspecting for flaws, expanding necks, and checking for excessive neck thickness variation.
For more reloading info, be sure to visit Panhandle Precision's Reloading section: panhandleprecis...
Other videos in the Precision Rifle Load Development series:
• Precision Rifle Load D...
• Precision Rifle Load D...
• Precision Rifle Load D...
• Precision Rifle Load D...
Excellent:
Clickable outline:
2:00 Visual Inspection of Cases
2:25 Weight Sorting Cases?
4:42 Measurements of Virgin Brass
6:35 Expanding Case Necks
8:25 No Need to Full-Length Body Size
9:30 Bevel/Chamfer Case Mouths
10:15 Prime Cases
11:00 Neck Turning?
13:05 Measuring Neck Runout
Thank you for your straight talk and common sense approach. Some of these other reloading videos on UA-cam go so far to the extreme that if you are not a professional competition shooter who has won the lottery, you can not relate to the person making the video and they can not relate to their audience!
Late to the Precision Reloading and Shooting endeavor but what a blessing to find a YT web series such as Sam has put together here.
I'm excited about this series. I'm doing load development right now with my 6.5CM Howa 1500. I'd say 50% of my total reloading knowledge has come from you, Sam. I like all the info about getting it to shoot 1/2MOA and be done, but since this is my first rifle, I want to go all the way thru the load development process and find the absolute best load, just for the complete experience.
Sam makes some of the best instructional videos out there. Very practical manner of educating reloaders. You would be hard pressed to find better on the internet. Thanks Sam.
Love your videos man. I just wish I would of gotten into the sport at a younger age. I love when your boy is in the videos. The think with having an expensive hobby and being young, You CANT Afford it. But now that I’m a bid older an can somewhat afford it, I do it for my 2 Boys. Maybe someday, they’ll shoot as well as you. Thank you for inspiring us. Keep that kid of your sharp, and safe.
Greetings from Sweden, Sam, some have it... then again some don´t... The ability to make things understandable. You´re my Guru when it comes to realoding.
Are the Swedish chicks still as good looking as they were? Last visited a few years ago, had a great time the people were very friendly.
You and your kid, are a great inspiration. That kid shoots better than I will ever shooting. I love how he isn’t afraid of recoil. BadAss.
Sam,
Just rewatched this video. I particularly like you common sense approach to precision reloading. I tend to go a bid overboard at first and then discard time wasting steps. Your vid's let me eliminate some steps up front.
Thanks, Sam. I appreciate that you are will to teach us your techniques of reloading. I myself will start reloading soon. This is because California has band us from buying ammo on line. Also this will help me get more involved in Precision Shooting. Again thank you. 👍🏽😎
Wow...California. communist utopia
Just getting into reloading so this should be good thanks for taking the time.
A lot of data in this video that is NOT in the books and isn't easily learned from busy folks. Much appreciated for this video, good sir.
Glad you enjoyed it!
Sam thanks for showing us new guys what to do right from the beginning of the reloading process with brand new brass and a new rifle etc. I am just trying to get started in to reloading and have searched the web for hours trying to find an expert that will show me the process right from the very beginning with what is needed. very eagerly waiting for your next episode. Thanks.
Thanks for answering a question I had about new brass being . 010 smaller than the chamber starting out , I payed attention the second time I watched. Lol
I realized that I am weighing in on this very late but I just want to say that results driven efforts are the way to go in the world of precision shooting. Identify your objective and align your efforts to achieve it. You will learn along the way what processes get you there and which ones don't matter. I love this comprehensive video series!
Tahnk you so much for putting these vids together. I for one need this info as I dive into reloading for precision rifle
Mr. Sam. Enjoyed, and found this video help full for beginner. Printed off article on this same subject matter. Can't wait to read it. Thank f or making this information available. Have a great day. Everett
Yessir, if you start with quality brass like Lapua, Peterson, and Alpha OCD then there's never enough runout to neck turn. Good video
Agreed, 😊I do normal prep on my Lapua brass and just shoot it. I shoot 6.5X47 with a 140 gr Berger hybrid , 41.0 gr of AA4350, A CCI 450 primer and I’m getting an average of 2686 and an SD of 10. That works out to a one hole group at 200 meters!
This is going to be a great series! Glad to hear I'm not the only 260 Rem guy remaining. I recently experienced exactly what you were saying about the new Lapua brass starting out with a small neck diameter. I ended up using the neck expander button to open it up.
-- Todd
In addition to what he pointed out regarding prep for weighing cases, after forming, cutting, and deburring, then I uniform primer pockets and primer holes. THEN they're exactly the same xcpt wall thickness only
Lapua brass really is the best I've used. Love it especially in 6.5x55.
I just want to say thank you. I start in reloading, and it‘s a whole knowledge in itself, as much as shooting. But but works together. I like the way you validate what has an effetc and what‘s not: why spend time on something that causes no improvement in accuracy and consistency?
Excellent! I have a brand new (as yet) unfired Bergara B-14 HMR in 6.5 Creedmoor. I've been hand loading since the 70's and always up to learn more. Good info here. Thanks!
A great vid mate. thanks.
Plain common sense approach to the job. (almost identicle to my own lol )
Lapua brass, loaded through Sinclair tools with quality Berger projectiles in a well chambered quality barrel = results on target without any fussing about.
Excellent video Sam. Same process I use on my new Lapua brass. I don’t think I could explain it as good though.
I've never heard of a "holder of a PhD in reloading" ... but now I know it's a reality.
Love the vids man. I’m just getting into PRS and living in a smaller community, videos like this are critical. Thank you.
Thank you. I'm new at this reloading stuff.
If your loading blocks are heavy and are kind of slick to the touch, they're likely made from an acetal resin based polymer called Delrin. ..and Thanks for the great videos!
At 13:15 you demo the Sinclair tool doing runout checks. Functionally, the important runout is neck ID -to- outside surface of shoulder (or the conical section). The conical section locates the case body radially in the rifle chamber, line-to-line, with the conical section of the chamber, when the bolt is closed, and ejector pin is holding the case body forward in the chamber.
PS: Thanks for your efforts in developing a truly professional grade of videos for the aspiring precision rifle shooter, reloading ammo. Your lecture/teaching skills are very good, yet not intimidating.
Excited to see this new load development series! Just got a new 6.5 CM rifle and want to work up a load around the parameters that you shared in terms of a strong accuracy node and a relatively low ES. Thanks for putting out great content!
don't forget after reloading a brass a few times anneal it so it won't split and you can keep reusing it.
New sub..Bought my new 260rem...now time 2 work out 1/4 in groups..😁😎🇦🇺
Excellent advice on weighing cases. Made a note of that. Thanks
Really enjoy your videos and the knowledge transfer you provide. Thank you for taking the time to share your expertise.
Very helpful. Thank you.
Thanks for demonstrating the use of the Sinclair Expander die. I always use one when beginning with new brass, particularly belted mag brass. However, I'm interested in preventing the initial case stretch that always happens with new brass. I neck up one or two sizes, depending on how far apart they are, then FL size down just until the bolt closes with a fair amount of resistance. This, along with proper annealing, will prolong the brass life immensely. I've watched a few of your vids now and you know how to get across the information very well. Will be subscribing in two clicks.
I have been subscribed to your channel for while but just now really started watching your reloading videos and I have enjoyed and learned a lot from them. Thanks and I plan to watch every one eventually.
Thank you for your help in the E-mail again Sam. Keep the videos and information coming very helpful and knowledgeable. Thanks again from Oregon.
Thanks Sam again straight forwards nice and easy to understand looking foreword to the next one. Uk
Im exited aswell! Just ordered a .260 Rem and was just on your homepage looking at your loads, this series gonna be awsome! Thank you i love your videos.
Thanks mate. Well pieced together information and shared in a way that just plain makes sense. Cheers.
Great video, thanks for sharing.
Top Stuff and look forwards towards the balance of the series thanks for sharing.
I did , I am learning from you , you are top class , great teacher
Well done. Good information!
Can't wait to watch this whole series! You are great at explaining every step.
Thank you! These are the most comprehensive series of reloading videos.
Excellent. This guy gets it.
This series is absolutely awesome. I can't wait till the next video I thought I was the only one anal about handloading.
Believe it or not the best brass that I have reloaded for my Remington model 700 7mm magnum... Has been the cheap Monarch brand from Academy Sports. They don't have it anymore sadly but 10 years ago I bought a ton of it just because it was so much cheaper than Winchester or Remington or Hornady. Accuracy was okay but when I started reloading is where I saw the difference. I didn't have to do much trimming or resizing... I just clean the primer pocket And used a hand tool to deburr the neck. And the brass was within dimensions that's in the lyman reloading book. Granted I wasn't doing this for match or precision shooting.... But with a consistent powder charge being within 1 or half a grain difference. I narrowed my group to one inch at a hundred yards and had a consistent velocity averaging 2987 feet per second. 100 yards is sadly the limit where I live. Also back then I was just getting started being serious about shooting.... I was as green as you could be.Lol! I'm just wondering how much throat erosion I caused in that rifle.
john harvey (0
john harvey monarch is also the best ketchup you can buy , and I am not joking,
I have never seen that kind of brass and I have reloaded since the sixties, but make no mistake, what ever works in a rifle,, use it , that’s what everyone does, this panhandle guy is a reloading genius, no doubt, his tricks of the trade are the best I’ve seen, as for your old 7 mm Remington magnum no matter how much throat erosion you have , you will always be able to find something to shoot good in it , but I will tell you this , some of my old rifles only shoot good groups with a perfect bullet seating depth , accompanied by a maximum charge of powder , the low powered loads are better grouped by a new barrel , so spend most of your time on the hot end of the powder scale.
looking forward to see the rest! greetings from sweden
Third video of yours that I've watched. Very enjoyable.
Looking at your bench, I can see that you're also going broke with all money you're saving by not buying factory ammo
Excellent. Thank you.
thanks Sam!! Appreciate the wisdom!
This channel is great!!! Another a+ video definitely going to Binge watch.
Great info, been loading for about 20 years.
The problem I have when I clean the brass, is that there is always some corn cob stuck in the flash hole. How do you deal with that problem? Why don’t you do a video about what happens when you reload a rifle round and tumbling media remains/lodged in the brass. How it effects pressure, accuracy, and how likely it is to blow up the gun. You make awesome videos and I'm most grateful for all the work you do.😮💨
Great video as always. You keep put out great content. I’m going to start hand loading because you. Can’t wait.
Great vid Sam and timing couldnt be better! Just getting my new PRS rifle in 260 ready with a brand new load.
Great work buddy and thanks for the info.... keep well
Good video thanks for the info
At around 13:00, you say you don't bother turning necks, which is fair enough. But a lot of guys will have chambers with tight necks, and for them it will be necessary to turn them to avoid chambering problems and potentially dangerous pressures. I think that's worth pointing out.
Want to thank you for recommending the savage 12 lrp I love it really love your videos what then over and over again Have learned so much from you love the way you give your reasons for using dies doing certain things looking forward to your new videos thank you so much
I must have got lucky l guess. I brought my M77 home with two boxes of factory loads put a 4x Leupold on it took it outside on a target boresighted shot it in . Game over. Saved the brass necked it load was 180 gr. Hornady 73 gr. IMR 4831. It was shooting 2inches or better .
Sometimes better if l really worked at it ha ha. Never took the caps off that scope in 40 yrs ha ha🇨🇦🤠
Well done! Can’t wait to see the next video. I’m a new reloader and I’ve been trying to come up with a starting charge for a 300 win mag using 215 Bergers. My COAL is 0.300” longer than the SAAMI load info Berger supplied. Not sure how to compensate for the pressure change.
Add more slow- burning powder. Slowly...:-)
Thank you for doing this.
Really appreciate you taking the time to share your knowledge with us, a great testament to your character. Especially appreciate your thoroughness and attention to detail without letting us get stuck in the things that don't matter. I'm just starting to think about getting into precision shooting and loading. I don't want to drop 3-4k just yet on a new custom rifle, but I do have a Savage Model 16 in .270 WSM that consistently shoots sub-minute groups at 100 yds. But I haven't truly done any load development for it. Would love to know your opinion on setting up a .270 WSM as a long range rifle?
EXCELLENT video!!! Thanks!!
Thats beautiful
Thank you for all that great info
Thank you, it is done!
Always enjoy your videos! Thank you!
AWESOME!
would love input on how to properly set up the expander with mandrel
Great video, I don't think sorting brass by weight is worth the time. But for a different reason than you offered. Most the weight variance in a case is in the case head and that has very little to do with case volume. That being said if you have the time and energy to check cases then you're better off checking concentricity
That was a great video.
I hear ya. My BFF and hunting buddy for over 30 years who actually got me into shooting centerfire rifles does all this stuff and works up loads to get 0.016975034673944 groups, etc. etc. I just buy a couple boxes of the cheapest off the counter commercial ammo I can find for my caliber, shoot it to fireform to the chamber, clean, trim, debur, etc. etc. work up load, like you, til I'm at .5 or .6 MOA at 100 yards and I out-shoot 95% of the guys I run into at the range that have LRP Rifle Platforms. I don't mean to brag but I usu outshoot them with their own rifles too, lol. I then buy some bulk brass and process it (I don't weigh and measure, etc. just clean, FL resize, debut, trim, etc. shoot and, of course, reload the fire formed brass multiple times with my custom load. My buddy buys custom made rifles for $3.000 and I buy a Remington, Winchester, Weatherby rifle off the shelf, bed, float and trigger job and, so far, I've been lucky and have always been able to get them to shoot .75MOA or better. I've never had to replace a factory trigger just tune it up. I'll accept up to 1 MOA on a Big Game Rifle but NOT a Target or Varmint Rifle (I moa on a Prairie Dog at 300+ yards could easily be a miss). But, hey, each to his own.
U know your shit brotha. Excellent video keep em comin!
Nice video! You are correct, no sense expending time, money, energy and frustration on procedures that do not give any or very little net gains.
That time, money and energy would be much more valuable if spent by actually SHOOTING and developing ones marksmanship skills with that particular rifle and load. Real world in the field DOPE will IMHO trump spending weeks or months chasing that last tenth of a inch in possible accuracy. The human factor could have been improved by many times that in the same time span just by systematic training in real world scenarios. I know many may not want to concede or admit this is the best way to better overall performance. We as human beings are most of the time the weakest link in a shooting system if the rest of the system is top shelf.
20fps is kinda large of an extreme spread. With a typical 140gr match bullet around 3000fps it gives you around 5 inches of instant vertical.
Your videos are awesome in detail precise and easy to relate to. Got 308 and thought about the lopua brass offers a small or large primer case what's the difference between the two.
I love your videos, quick question do I prep my second fired brass the same way as the video you did on once fired brass? I need help because the brass are all different measurements after once fired because I was using different loads and bullets, you mentioned bump the shoulder back 2000s but all my shoulders are different lengths from the ones fired brass
Set them back all the same and they won't be different any longer.
Great videos thx for the info
Great video, sir! You just won an another fan :) Subscribed.
Great videos Sam I really like how you are right to the point with the reasons why or why not something matters. Are you a second or third generation reloader, or did you figure all this out on your own? I'm just starting out but really enjoy it and appreciate you sharing your knowledge.
Cool Ty
Love this video. I have a hard time building loads off brass that hasn't yet been fire formed to the chamber of the specific rifle. It seems wasteful, but I'll take new lapua brass and a moderate load with the cheapest bullet possible and just fire form them so I have a baseline. Either that, or use some factory Nosler ammo and start my loads with fired brass. Am I crazy?
If you are going to shoot the same cartridge for awhile it pays to have your own chamber reamer to keep successive barrels the same.
I know that you measured several dimensions on the Lapula brass. Are they all within the case's overall length specs or did you have to trim them to length?
I checked a few pieces of new brass. They didn't need to be trimmed, so I didn't. I've trimmed them after every firing, though.
Thanks for the video series, Sam. Looking forward to the subsequent videos in the series. What components did you use for the new rifle?
Hey dude great video! You mentioned 7WSM Brass, what do you think is the best available or did you convert yours from another WSM?
I'm still working through 400 pieces of WW I bought years ago. I have no idea what's available now. I would probably learn to form it from something better if I had to build another 7WSM.
Panhandle Precision are you still active Sam? Haven't heard from you in a while...
*Very good at least I like it*
Sam, thanks so much for this video. Very helpful. I notice quite a lot of bullets on that top shelf. How many do you usually like to keep per caliber and bullet. I just attended a long range class and needed about 260 rounds.
Fantastic videos and thank you for sharing your knowledge. New to loading and doing some homework. You mentioned you are trying to achieve 1000th of bullet grip Do you always try and achieve the same grip? Is it dependant on other factors?
I watch your videos all the time they are awesome. I live in a small town and availability of ammunition is limited let alone buying components. I recently bought some hornady ammunition to get once fired brass for my 300 Winchester mag. After sizing they were 4 thousands short of minimum trim length according to my hornady reload manual. Should I toss the all?
I ran a ladder test with new Lapua brass and 245 berger eol (300NM) and had great success finding a sweet spot however, when I loaded the once fired brass with that same charge weight, I was seeing overpressure signs. After asking around, I was told not to load test rounds in new brass. All the other variables that we could think of were ruled out. If you have any thoughts, it'd be appreciated
I believe that primer pocket tool is hollow possum pocket uniformer
Sam, I've enjoyed your very informative videos, and like your well thought out approach to reloading. I do have one question. Do you ever debur the flash hole from the inside or do you consider that a waste of time?
I've done it with Rem and WW brass. I haven't tested to see if it makes a difference, though. I wouldn't bother doing it with Lapua, Alpha, ADG, Gunwerks, etc.
Great video! I’ve learned SO much from your videos. I have a .308 precision rifle that I learned to reload for long range on and am about to build a precision 300 win mag for hunting. I have never loaded for .300 win mag. What do you think would be some fundamental steps that I will need to include that would be different from .308. I am a reliability new hand loader. I am using Lapua brass and Berger VLD. Thanks so much!