This Turbo Jet Flame Burns at 2372°F Sharp as a needle ! diy ideas you need in your life right now
Вставка
- Опубліковано 5 лют 2025
- Subscribe to Mr iPoo : bit.ly/3FrUgsT Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @mripoo
----------------------------------------------------------------------------------------
In this captivating video, we present to you the most amazing and useful life hacks that can significantly improve the quality of your life. Get ready for mind-blowing ideas that will make your everyday life simpler, more convenient, and more efficient.
----------------------------------------------------------------------------------------
TIMESTAMPS:
00:01 - The turbo jet flame works as sharp as a needle.
00:07 - Functions with the gas cylinder turned off.
00:17 - I demonstrate how to properly bend a thin copper tube into a spiral. 00:55 - How I turned an old casing into a burner frame.
02:22 - While the old jet lighter could have been restored, I decided to disassemble it and remove some parts to make the burner.
04:23 - To enhance airflow, power, and extend the turbo flame, I drill a hole in the casing.
05:45 - Assembling all components into one system and testing it.
06:17 - A detailed overview of how the ultra-thin and long turbo flame operates.
06:45 - Proper hand positioning for more convenient burning, heating, or soldering of copper tubes.
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability.The following video might feature activity performed by our actors within controlled environment - please use judgment, care, and precaution if you plan to replicate.
◉ TikTok: / mr.ipoo
◉ UA-cam: / @mripoo
◉ Instagram: / mr_ipoo
Let's unleash your inner builder and craft amazing projects together. 🛠️
Excelent Jobs...Saludos from Chile..!!
Nice Job man ! I love it ! really
Cool project, nice skills, and some useful tools! To bend the copper pipe did you need to do anything to stop it rupturing/breaking? Like put sand inside for example.
Yahshy - Very nice!
خیلی خوب❤❤
my friend congratulations for your videos they are very nice I watched them all!!! if you want And it's easy for you at 5:30 You put a liquid for Soldering you can tell me the details of this liquid. I have tried Many others are not good this seems very effective, And I hope you are well and make nice videos greetings Spyros from London!!!👍
"I think" the "turbo" coil would restrict and slow the flow an rubber o-rings will melt in seconds. Nice ideas with jet and bullet casing though.
Ciao from Florida USA.
Greetings! This is a high-temperature-resistant rubber seal designed to withstand temperatures ranging from 1,932 to 3,632 degrees Fahrenheit. It is noteworthy that the nozzle does not attain excessively high temperatures, as this would compromise the integrity of the soldering. The effectiveness of the cooling process is enhanced by a sharper flame, resulting in a reduced point of contact with the frame. It is worth noting that the apex of the flame consistently maintains the highest temperature, regardless of the specific conditions, emphasizing the significance of this thermal characteristic.
the flame burns with separation, so the nozzle, rubber and tin do not heat up
Dude! How do you bend that tube so easily?! All these other videos got us filling it with sand and it still kinks
The cylinder is why. A can of soda would do.
I can see that solder melting if used for more than 5min 😂😂😂
And why the coil for 😂
Did that get flash back when you opened the valve 😂😂😂
Oh good you can melt sauder again
He clearly wasn't impressed with his project because he destroyed it at the end. He installed a fuel tank in the coil which he covers up with his thumb to make it look like it is running on it's own.
To understand the essence of the project, you should turn on the subtitles. Each step is described in the subtitles, and an explanation is provided for each stage. So, you might feel like something is off :) Have a great day and wonderful weekend! Thank you for following my creative work.
not running on it's own, it's running from leftover pressure in the hose after closing the valve. At the end one can see the flame start to shrink and then go out as he opens the valve.
на горелке которая нагревается он запаял обычным припоем? чувак это бред
Yet another incomplete, non-educational, clickbait video from Mr iPoop-
😮😮😮😮😮خب❤😢زژ