Fantastic video, Steve!! I must say the FrSky stabilized receivers are a breeze to setup and they feel phenomenal in flight!! SUPER-EXCITED for the new receiver firmware files!! Thank you guys for constantly innovating and updating!!
All good information for BASIC mode stabilization setup thank you. Now where is the advanced stabilization course? 😁 The TDSR12 manual says download / install three LUA scripts to use in setting up stabilization then a couple of pages later says you need to use RBmixer and a computer to configure ADV stabilization feature. There is very little current documentation and no tutorials I can find on setting up / using advanced stabilization. I am working on a model that I want to add stabilization to the canards on Ch 6&7 but documentation seems to indicate that must be done in advanced mode, if it can be done at all. Can you please put an advanced stabilization tutorial on your to do list?
I'm new to FrSky. Just finished setting up my X20s with a Tandem SR18. I did the firmware upgrade for the transmitter. It is now 1.52. Is this the version with the new Stablizer setup? Also, will I have to update my Receiver at some point to accept this new setup?
Nice tutorial but frankly a bit shallow. Could you make a video on how to setup the two independent stable systems that these new receivers seem to support. You should have two gyros with separate gains at your disposal right?
Great video! Really helped get my x20s working properly! I have got a question about flight modes? Have got x20s and using tdsr10 receiver. I’m running stabilised modes on FM1/2 And flaperons and tailerons (takeoff and landing) using FM 3/4 This works well for separate trims. But when I select FM1 or 2(stability modes) it overrides the other modes for flaps ( flaperons/ tailerons) Would be nice to run stability Will using landing flaps! Any suggestions would be much appreciated! Cheers Richard 😎
Howdy. Question: I have been able to get the stabilization working in a test plane of mine. But when I've put it in an F-16 EDF, after the Self Test, the plane won't respond to any inputs when the Stabilization is turned on in the transmitter. The plane works fine with it off. But when it's turned on, the plane's control surfaces are completely non-responsive. Any tips? The stabilization seemed to work ok before I self tested. But once I've self tested that receiver, the stabilization locks up the plane. thanks!
@@steveschlesinger3459 this still does not work with archer sr6. the set up wizard choceing the sr6 , when i go to bind the it will not recognizes the rx does not make it easy when you cant not bind it
That looks like the dogs' bollox i cant wait to get my teeth into that watching the video that looks so similar to the flagship tx's of my old favorite Radio & i agree the stabilisation of the Frsky rx's without question fly on rails 👍 & its the 2.4 & 900 that was why i moved to frsky.
Hello all! I Need some help. Good flying buddy wanted update x20s to 1.5.4. went to ethos suite and now his radio want come out bootloader mode. He took his battery out of his x20s and re connected and it came back on in bootloader mode. Could he have bad SD card?
Fantastic video, Steve!! I must say the FrSky stabilized receivers are a breeze to setup and they feel phenomenal in flight!! SUPER-EXCITED for the new receiver firmware files!! Thank you guys for constantly innovating and updating!!
Thank you for these amazing videos, definitely helping me to understand this new system 😊
All good information for BASIC mode stabilization setup thank you.
Now where is the advanced stabilization course? 😁
The TDSR12 manual says download / install three LUA scripts to use in setting up stabilization then a couple of pages later says you need to use RBmixer and a computer to configure ADV stabilization feature. There is very little current documentation and no tutorials I can find on setting up / using advanced stabilization.
I am working on a model that I want to add stabilization to the canards on Ch 6&7 but documentation seems to indicate that must be done in advanced mode, if it can be done at all.
Can you please put an advanced stabilization tutorial on your to do list?
I'm new to FrSky. Just finished setting up my X20s with a Tandem SR18. I did the firmware upgrade for the transmitter. It is now 1.52. Is this the version with the new Stablizer setup?
Also, will I have to update my Receiver at some point to accept this new setup?
Nice tutorial but frankly a bit shallow. Could you make a video on how to setup the two independent stable systems that these new receivers seem to support. You should have two gyros with separate gains at your disposal right?
Great video! Really helped get my x20s working properly!
I have got a question about flight modes?
Have got x20s and using tdsr10 receiver.
I’m running stabilised modes on FM1/2
And flaperons and tailerons (takeoff and landing) using FM 3/4
This works well for separate trims.
But when I select FM1 or 2(stability modes) it overrides the other modes for flaps ( flaperons/ tailerons)
Would be nice to run stability Will using landing flaps!
Any suggestions would be much appreciated!
Cheers Richard 😎
Is it possible to explain right from beginning to the end how to set up the Gyro on it TDTDSR receivers please I’ll be appreciate it
Howdy. Question: I have been able to get the stabilization working in a test plane of mine. But when I've put it in an F-16 EDF, after the Self Test, the plane won't respond to any inputs when the Stabilization is turned on in the transmitter. The plane works fine with it off. But when it's turned on, the plane's control surfaces are completely non-responsive. Any tips? The stabilization seemed to work ok before I self tested. But once I've self tested that receiver, the stabilization locks up the plane. thanks!
hey Steve i have the archer sr6 receiver it is not in the for stabilized receiver what am I suppose to use for it.
Try another 6 channel stabilized receiver.
@@steveschlesinger3459 this still does not work with archer sr6. the set up wizard choceing the sr6 , when i go to bind the it will not recognizes the rx does not make it easy when you cant not bind it
That looks like the dogs' bollox i cant wait to get my teeth into that watching the video that looks so similar to the flagship tx's of my old favorite Radio & i agree the stabilisation of the Frsky rx's without question fly on rails 👍 & its the 2.4 & 900 that was why i moved to frsky.
Hello all! I Need some help. Good flying buddy wanted update x20s to 1.5.4. went to ethos suite and now his radio want come out bootloader mode. He took his battery out of his x20s and re connected and it came back on in bootloader mode. Could he have bad SD card?
Send me his contact info at Steve@FrSky-RC.com