I work on industrial batteries and chargers . Not the same as HVAC. But I Love your approach, I wish more technicians were as diligent as you . Thanks for making these videos for us to geek out on !!
Just found your channel today. Very interesting and educating videos. Kind of got addicted to watching them. I rarely work on that kind of stuff and in that case they´re quite simple tasks appointed by my boss.
Here in Missouri we don’t see a lot of silent alarms. But you’ve certainly brought it to my attention now and I look out for them more. Smoke detector still give me fits but I’m working on them thanks to your video and planing on building my own trainer for trouble shooting purposes. Thanks for putting in the time to help us newer guys out. As I get better I may have questions.
Yeah no fun....... Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Be careful if you do any soldering or repair work inside a hospital or some large public buildings. I worked in a hospital and Convention Center and when you set off a alarm accidentally there the fire dept will respond. They can also send you a fine/$$ bill if you mess up. With a hospital and most buildings it has a short 3 minute time delay so security can try get to the area to see if it is a real fire but that time frame is very short. Then it goes in General Alarm and the trucks roll.
Great advice I too have set off alarms in a hospital and it is not fun, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
I called the Fire Department from Hosing out a Cooling Tower at an Apartment Building. The hose connection was tapped into the Sprinkler Flush Pipe. Didn’t know the manager had to call it out, before a tower cleaning. The Electronic tower fill was in the Mechanical Room. Also had a Restaurant the gas safety shut off was wired into every RTU.
reminds me, I once did HVAC and was called in on a holiday to defrost a ice chest, while I was there I wanted to check out the compressor and do a visual, the guy working there was alone and it turned out that the keybox that had the keys to the shed it was in had a burglar alarm and so when we got back there were a couple of security officers near the entrance and I said goodbye to the guy and left once I had packed my stuff in the car, felt pretty bad for the guy.
I was replacing a restricted dryer and had a puff of smoke go down the return. I didn’t know but it set off the fire alarm. I see a head on my ladder and it’s asking me if I set off the alarm. Sh&! I say as I hear the sirens. Praying they don’t get in an accident on the way to a false alarm. I met the fire department at the front of the store. Sorry I say. They say don’t do it again. I recommend when welding or performing heat checks that you put the fire alarm in test mode. Call the monitoring company and have this done. Stay safe.
I think that particular first responder needed to curb the ego a little. Not like you were messing with a pull station for fun. It was an accident. False alarms can easily happen when repairs or alterations are being made inside a building.. yes, absolutely take precautions to minimize the chance of it happening but there are no guarantees it won’t happen ever again, that’s unrealistic. You never know what kind of system you’re dealing with. I’ve done it too while working in telecom and was fortunate enough to meet some rather understanding first responders. It can also be argued that putting an entire fire alarm system into standby can jeopardize the fire safety of larger buildings even if it’s only for 1/2 hour or so.
Lol I have set off one of those panic alarm by accident cleaning a walk in cooler. Was meet by police who laugh at how white I got when they came into the cooler with guns drawn. Was not a good moment for me. Did I mention I was an apprentice when this happen.
Yeah I set one off in San Bernardino they came with a Helicopter, the sergeant was pissed...... My bad! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Chris you have been helpful to me with videos. Thank you. You are in the top 3 of my list to watch. Happy New Year to you and your family. I would like to joining you tonight about the service call.
The Honeywell t6 pros are nice simple programmable t-stats that’s what my company installs 95% of the time but you have to buy a special model for 2 stage systems I like Bryant connex controls as well
Coming from the insurance industry with no knowledge on this whatsoever... but dude i keep watching your videos! you sir have a new sub and like on all videos i watch :D hey maybe i could even fix my AC at work ;)... i wish haha good vidoes though man, Im totally with you on your explanations!
Those alarm systems connecting with an a/c unit, that’s becoming more and more popular in some restaurants. Just have to inspect where those alarms are once you touch base with the customer.
He's not joking I Did that at the one place I worked at it was late and I was in the cooler I pushed a stack of boxes into one didn't even know it lol. Let it be known I was pretty surprised to see 6 cop cars and 6 undercover out front with 4 policemen in the kitchen lol
will do thanks bud ! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
So if a restaurant is getting robbed, the employees are going to retreat to the freezer, press the panic button, and then freeze to death waiting for police? Why is this a better location than under the till counter or elsewhere in the kitchen?
There could be multiple panic buttons in the system. Manager's Office, Cash Room (if they have one), Fridge, Freezer, near back door, etc. Sometimes we install wireless pendant ones that people can wear around their neck.
In the movies the bad guys always lock the employees in the walk-in. The panic button is there for that situation and for the one where the door jams and people are locked in with no one on the out side (another favorite of TV and movies).
Sometimes they are easy! Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Good topic! Setting off silent alarms is not a good deal also it makes the HVAC tech look bad to the customers and could cause fines from the municipality for false responses Happy new year Chris!
Definetly not good to set them off, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Thanks bud I'm gonna be talking about duct detectors on my livestream this afternoon. I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Thanks bud , Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Fire alarm can be a problem also if your soldering or something that makes smoke when making repairs. Always call in regardless or there will be an issue
Yes they can , Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Does the codes on refrigeration safety in your state obigue to have an axe (to be able to breaking the look in extreme cases) just beside the panic alarm button? Here is mandatory since 2011, specially in walk in freezers.
Nope our code just requires a emergency release if the door has a lock on it, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
I never heard about panic alarms in coolers or even being a safe room, they don’t put them in freezers right? In my area maybe every restaurant should have a panic alarm, matter of fact every business should have safe room
Yeah it's a pretty common thing with chain restaurants in my area. Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
sounds overly liberal..... the rest of us prefer "panic triggers" that make loud noises and leave large holes where aimed ;) aka "the original panic alarm and issue solver"
Yeah, I work at a chain and we have one in the walk in. And one under the counter. One time someone accidentally hit it and we had sheriffs deputies flying into our lot and coming in guns drawn.
Duct detector sorry if my pronunciation sounded like duck my bad! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
HVACR VIDEOS No worries chap. Enjoy watching. I’m nothing to do with your Industry, actually work with Steam Trains, just like to know how things work. Carry on making content chap! Still 2018 here, but happy New Year.
@@allybaker712 i have customers that wont upgrade to gas and burn coal in their boilers. I have ones from 1930s to a new one. Cool but dumb and obsolete
Question about the location of the smoke detector? I noticed in one location I went the detector was on the supply duct but i was told at one point it should be on the return ? Or does it not matter ?
I am going to be talking about duct detectors this evening if you can make it , I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
In the case of this unit there is two gas valves and two heat exchangers, so first stage turns on 1 and second the other. But on other units there might just be one gas valve that has the ability to increase the gas flow into one single heat exchanger on the call for second stage heat.
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
thanks , Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
construction worker always keeping me busy, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
yeah, don't blame the "cleaning crew" whom likely followed directly after the mess the construction crew made and did so in a made huff of smashing and banging everything around, but maybe the regular employees were cranky and smashing everything around, because they had to work right to closing or 30 minutes late cleaning things....... been there done that, seen it multiple times and unless there's cameras that caught it, everyone shares the blame ;)
Had an issue with a fire alarm shutting a lennox unit down. Ended up being a shorted 460v condenser fan motor tripped the duct detector. Controld got locked out and it alerted on the main fire alarm and security controls at the front of the store
Funny I just made a video on the exact same scenario go figure....... Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
The fire alarm should be stand alone no matther what, however the fire alarm should give a signal to the hvac system to go in fire mode. This will enable fans and some zone dampers to activate and keep emergency exit path smoke free, and to override any faults that are active. This is code over here.
I remember having to do this in fitouts I used to do for retail by incorporating the duct smoke detectors on larger units in my plans. It wont set the fire alarm, but it will do what he says and beep annoyingly or show a trouble code indicating the failed sensor. Ours at work does the same thing.
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Smoke detectors normally shut the system off, don't want to keep feeding fresh air into the fire as well as don't want to be moving the flames and smoke around
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below ua-cam.com/video/eeEo2u2X1rY/v-deo.html
In the new year I'm cutting back, but I will still continue to watch. You are very welcome.
I work on industrial batteries and chargers . Not the same as HVAC.
But I Love your approach,
I wish more technicians were as diligent as you .
Thanks for making these videos for us to geek out on !!
Thanks bud
Just found your channel today. Very interesting and educating videos. Kind of got addicted to watching them. I rarely work on that kind of stuff and in that case they´re quite simple tasks appointed by my boss.
Thanks bud
Here in Missouri we don’t see a lot of silent alarms. But you’ve certainly brought it to my attention now and I look out for them more. Smoke detector still give me fits but I’m working on them thanks to your video and planing on building my own trainer for trouble shooting purposes. Thanks for putting in the time to help us newer guys out. As I get better I may have questions.
I guess their more common in areas that sees more criminal activity, like the big city areas.
haha i can only imagine the confusion turning around to see a fire fighter on a ladder coming up.
Yeah no fun....... Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Be careful if you do any soldering or repair work inside a hospital or some large public buildings.
I worked in a hospital and Convention Center and when you set off a alarm accidentally there the fire dept will respond. They can also send you a fine/$$ bill if you mess up.
With a hospital and most buildings it has a short 3 minute time delay so security can try get to the area to see if it is a real fire but that time frame is very short. Then it goes in General Alarm and the trucks roll.
Great advice I too have set off alarms in a hospital and it is not fun, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
I called the Fire Department from Hosing out a Cooling Tower at an Apartment Building. The hose connection was tapped into the Sprinkler Flush Pipe. Didn’t know the manager had to call it out, before a tower cleaning. The Electronic tower fill was in the Mechanical Room. Also had a Restaurant the gas safety shut off was wired into every RTU.
reminds me, I once did HVAC and was called in on a holiday to defrost a ice chest, while I was there I wanted to check out the compressor and do a visual, the guy working there was alone and it turned out that the keybox that had the keys to the shed it was in had a burglar alarm and so when we got back there were a couple of security officers near the entrance and I said goodbye to the guy and left once I had packed my stuff in the car, felt pretty bad for the guy.
I was replacing a restricted dryer and had a puff of smoke go down the return. I didn’t know but it set off the fire alarm. I see a head on my ladder and it’s asking me if I set off the alarm. Sh&! I say as I hear the sirens. Praying they don’t get in an accident on the way to a false alarm. I met the fire department at the front of the store. Sorry I say. They say don’t do it again. I recommend when welding or performing heat checks that you put the fire alarm in test mode. Call the monitoring company and have this done. Stay safe.
Yep, I've done the same thing
I think that particular first responder needed to curb the ego a little. Not like you were messing with a pull station for fun. It was an accident. False alarms can easily happen when repairs or alterations are being made inside a building.. yes, absolutely take precautions to minimize the chance of it happening but there are no guarantees it won’t happen ever again, that’s unrealistic.
You never know what kind of system you’re dealing with. I’ve done it too while working in telecom and was fortunate enough to meet some rather understanding first responders. It can also be argued that putting an entire fire alarm system into standby can jeopardize the fire safety of larger buildings even if it’s only for 1/2 hour or so.
Lol I have set off one of those panic alarm by accident cleaning a walk in cooler. Was meet by police who laugh at how white I got when they came into the cooler with guns drawn. Was not a good moment for me. Did I mention I was an apprentice when this happen.
Yeah I set one off in San Bernardino they came with a Helicopter, the sergeant was pissed...... My bad! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Chris you have been helpful to me with videos. Thank you. You are in the top 3 of my list to watch. Happy New Year to you and your family. I would like to joining you tonight about the service call.
Right on thanks for the nice words!
The Honeywell t6 pros are nice simple programmable t-stats that’s what my company installs 95% of the time but you have to buy a special model for 2 stage systems I like Bryant connex controls as well
Coming from the insurance industry with no knowledge on this whatsoever... but dude i keep watching your videos! you sir have a new sub and like on all videos i watch :D hey maybe i could even fix my AC at work ;)... i wish haha good vidoes though man, Im totally with you on your explanations!
Thanks for watching
Those alarm systems connecting with an a/c unit, that’s becoming more and more popular in some restaurants. Just have to inspect where those alarms are once you touch base with the customer.
He's not joking I Did that at the one place I worked at it was late and I was in the cooler I pushed a stack of boxes into one didn't even know it lol. Let it be known I was pretty surprised to see 6 cop cars and 6 undercover out front with 4 policemen in the kitchen lol
Good Repair Tip Man
Thanks bud
Good video, thanks for sharing your experience.
Happy New Year...🍾
Keep the videos coming
will do thanks bud ! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Yep I've set off a fire alarm in an old folks home I was trying to pull the broken glass back to flat on a already broken glass break button
Another great video. Happy New Year.
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Learning a lot from your videos. Subscribed!
Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
So if a restaurant is getting robbed, the employees are going to retreat to the freezer, press the panic button, and then freeze to death waiting for police? Why is this a better location than under the till counter or elsewhere in the kitchen?
There could be multiple panic buttons in the system. Manager's Office, Cash Room (if they have one), Fridge, Freezer, near back door, etc. Sometimes we install wireless pendant ones that people can wear around their neck.
In the movies the bad guys always lock the employees in the walk-in. The panic button is there for that situation and for the one where the door jams and people are locked in with no one on the out side (another favorite of TV and movies).
I had a service call with a blank tstat. Just needed battery replacement.
Sometimes they are easy! Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
always interesting.....learn something new every vid..
Right on thanks bud
Good topic! Setting off silent alarms is not a good deal also it makes the HVAC tech look bad to the customers and could cause fines from the municipality for false responses
Happy new year Chris!
Definetly not good to set them off, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Awesome video and great explanation. 👌🏽👍🏼✌🏽
Thanks bud I'm gonna be talking about duct detectors on my livestream this afternoon. I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Good video as always Chris great explanation. Would of told you on Facebook but I'm banned again lol
Thanks bud , Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Happy new year!!!
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Fire alarm can be a problem also if your soldering or something that makes smoke when making repairs. Always call in regardless or there will be an issue
Yes they can , Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
This and setting up new package units with the shipping oil still on the heat exchangers- even if you do open up the doors, some can still get inside
Does the codes on refrigeration safety in your state obigue to have an axe (to be able to breaking the look in extreme cases) just beside the panic alarm button? Here is mandatory since 2011, specially in walk in freezers.
Nope our code just requires a emergency release if the door has a lock on it, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
I never heard about panic alarms in coolers or even being a safe room, they don’t put them in freezers right? In my area maybe every restaurant should have a panic alarm, matter of fact every business should have safe room
Yeah it's a pretty common thing with chain restaurants in my area.
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
sounds overly liberal..... the rest of us prefer "panic triggers" that make loud noises and leave large holes where aimed ;)
aka "the original panic alarm and issue solver"
Yeah, I work at a chain and we have one in the walk in. And one under the counter. One time someone accidentally hit it and we had sheriffs deputies flying into our lot and coming in guns drawn.
Separated by a common language. UK chap here, first heard Duck Detector!? Lol
Duct detector sorry if my pronunciation sounded like duck my bad! Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
HVACR VIDEOS No worries chap. Enjoy watching. I’m nothing to do with your Industry, actually work with Steam Trains, just like to know how things work. Carry on making content chap! Still 2018 here, but happy New Year.
We get to play with stuff from the 1800s. Not many electrical faults! ua-cam.com/video/gtYsH1L0n-4/v-deo.html
@@allybaker712 i have customers that wont upgrade to gas and burn coal in their boilers. I have ones from 1930s to a new one. Cool but dumb and obsolete
Question about the location of the smoke detector? I noticed in one location I went the detector was on the supply duct but i was told at one point it should be on the return ? Or does it not matter ?
It really depends on local codes, it will work in either location .
I am going to be talking about duct detectors this evening if you can make it , I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
I'll make sure to check it out 👍
Ok so whats the difference between single stage heating and two stage heating?
Thanks for the great video!!!
In the case of this unit there is two gas valves and two heat exchangers, so first stage turns on 1 and second the other. But on other units there might just be one gas valve that has the ability to increase the gas flow into one single heat exchanger on the call for second stage heat.
how many quacks does it take to set off a duck detector?
2
Nice video ty
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Good vid Bud ... See ya next year ... Lol ...
thanks , Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Damn Constuction workers. I’ve seen this too. Some construction guys are careless and don’t pay attention to the surrounding area
construction worker always keeping me busy, Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
yeah, don't blame the "cleaning crew" whom likely followed directly after the mess the construction crew made and did so in a made huff of smashing and banging everything around, but maybe the regular employees were cranky and smashing everything around, because they had to work right to closing or 30 minutes late cleaning things.......
been there done that, seen it multiple times and unless there's cameras that caught it, everyone shares the blame ;)
Had an issue with a fire alarm shutting a lennox unit down. Ended up being a shorted 460v condenser fan motor tripped the duct detector. Controld got locked out and it alerted on the main fire alarm and security controls at the front of the store
Funny I just made a video on the exact same scenario go figure....... Thanks for watching, I am going to go live on UA-cam this afternoon at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
The fire alarm should be stand alone no matther what, however the fire alarm should give a signal to the hvac system to go in fire mode. This will enable fans and some zone dampers to activate and keep emergency exit path smoke free, and to override any faults that are active. This is code over here.
I remember having to do this in fitouts I used to do for retail by incorporating the duct smoke detectors on larger units in my plans. It wont set the fire alarm, but it will do what he says and beep annoyingly or show a trouble code indicating the failed sensor. Ours at work does the same thing.
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html
Smoke detectors normally shut the system off, don't want to keep feeding fresh air into the fire as well as don't want to be moving the flames and smoke around
Nice video
Thanks bud
I've fallen and can't get out of the freezer.
👍👍👍
👍
3036
Thanks for watching, I am going to go live on UA-cam this afternoon 12/31/18 at 5:00pm pacific time to do a live Q and A session you should come over and check it out, there is a link below
ua-cam.com/video/eeEo2u2X1rY/v-deo.html