Shallow Foundation: Plate Load Test

Поділитися
Вставка
  • Опубліковано 17 кві 2020
  • Download PDF Notes:drive.google.com/open?id=1dG6...
    plate load test is useful to estimate bearing capacity of soil on field.
    The test procedure is given in IS:
    1888-1982 (Revised). The procedure, in brief, is as follows:
    (i) After excavating the pit of required size and levelling the base, the test plate is
    seated over the ground. A little sand may be spread below the plate for even support. If ground water is encountered, it should be lowered slightly below the base by
    means of pumping.
    (ii) A seating pressure of 7.0 kN/m2 (70 g/cm2) is applied and released before actual
    loading is commenced.
    (iii) The first increment of load, say about one-tenth of the anticipated ultimate bearing
    capacity, is applied. Settlements are recorded with the aid of the dial gauges after 1
    min., 4 min., 10 min., 20 min., 40 min., and 60 min., and later on at hourly intervals
    until the rate of settlement is less than 0.02 mm/hour, or at least for 24 hours.
    (iv) The test is continued until a load of about 1 1
    2 times the anticipated ultimate load is
    applied. According to another school of thought, a settlement at which failure occurs
    or at least 2.5 cms should be reached.
    (v) From the results of the test, a plot should be made between pressure and settlement, which is usually referred to as the ‘‘load-settlement curve’’, rather loosely.
    The bearing capacity is determined from this plot, which is dealt with in the next
    subsection.

КОМЕНТАРІ • 64

  • @vinayagamoorthy37
    @vinayagamoorthy37 3 роки тому +13

    Clear Explanation. Students can easily understand how to conduct plate load test. Shown the test setup clearly and explained about the procedure.

  • @saquibwasim6118
    @saquibwasim6118 6 місяців тому

    THIS PLAYLIST WAS A SAVIOUR FOR ME THANK U SO MUCH SIR

  • @omarosama155
    @omarosama155 3 роки тому +3

    Great video and a great person who helps people by his videos👍

  • @Joey-bk8bx
    @Joey-bk8bx 3 роки тому +1

    The way u are explaning is extraordinary because picture catches the mind & its easy to understand & to remember for a long time

  • @uzmakhan4222
    @uzmakhan4222 3 роки тому +1

    u deserve millions of subscribers...great video

  • @avinashchandar32
    @avinashchandar32 Рік тому

    Very easily and simply explain
    Thanking you

  • @sadmanhafizsiam9604
    @sadmanhafizsiam9604 2 роки тому

    Good explanation... Thank you

  • @masidd5459
    @masidd5459 4 роки тому

    Well done bro.. keep going 👍

  • @Dr.Fahmi.GEOtExcel
    @Dr.Fahmi.GEOtExcel 5 місяців тому

    Great educational lecture.

  • @naziatkawsar4145
    @naziatkawsar4145 2 роки тому

    Many many thanks for you

  • @-Vijayabhaskar-gy6ni
    @-Vijayabhaskar-gy6ni 3 роки тому

    Excellent 👌.. information sir

  • @bisht1202
    @bisht1202 3 роки тому +2

    Very well explained👌Made the whole procedure very clear in my mind. 👌😃

  • @abvipchan80
    @abvipchan80 3 роки тому

    Nice EXPLANATION

  • @shubhamgupta1646
    @shubhamgupta1646 3 роки тому +1

    Very well explained..💯

  • @kirankumar-wo9me
    @kirankumar-wo9me Рік тому +1

    Good explanation

  • @gauravvishnuvardhan
    @gauravvishnuvardhan 4 роки тому

    Thank you.
    It's helpful.

  • @naraharimanne5240
    @naraharimanne5240 4 роки тому +1

    Well explanation, animation video is very nice

  • @Vishal12
    @Vishal12 2 роки тому

    Great brother

  • @venkateshchepuri1648
    @venkateshchepuri1648 2 роки тому

    Nice explanation 😀

  • @vishusingh5129
    @vishusingh5129 2 роки тому

    Brilliant

  • @anilkumarkomarampuli
    @anilkumarkomarampuli Рік тому

    Modulus of subgrade reaction of raft foundation determined by plate bearing test

  • @explorewithdjoy
    @explorewithdjoy 2 роки тому

    Very informative

  • @uzmakhan4222
    @uzmakhan4222 3 роки тому +1

    do bureid flexible conduits next

  • @nayabkhan7835
    @nayabkhan7835 Рік тому

    Can you please tell me which software you have utilized for making this animation.? I'll be thank ful

  • @sayedjavid1229
    @sayedjavid1229 9 місяців тому

    Really nice vedio

  • @krishnagokulwala4118
    @krishnagokulwala4118 Рік тому

    Thanku

  • @niveditabarik1356
    @niveditabarik1356 3 роки тому +1

    sir can you please explain about zero correction in plate load test

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  3 роки тому

      Sorry I am not aware of this. By any chance is it related to seating load applied before start of the actual loading ? We apply an initial pressure of 7kN/m2 at the start of loading. After some times this load is removed and then dials are adjusted to zero.

  • @mostwanted6162
    @mostwanted6162 3 роки тому

    Thanks

  • @kundanpatidar984
    @kundanpatidar984 3 роки тому

    Sir if we apply pressure by hydraulic jack let 30 kg/cm^2 on dial gauge and after some it will reduce or not on settlement of plate please explain

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  3 роки тому

      Kundan can you please specify which part of the video you are talking about. I didn't understand the question

    • @kundanpatidar984
      @kundanpatidar984 3 роки тому

      @@CuriousCivilEngineer sir it's my query want to ask that if there is settlement in plate there will be any variation in dial gauge used to measure pressure

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  3 роки тому +1

      No. We take care of that during start. Pressure measuring gauge is set up in such a way it does not get disturbed by settlement of plate. If that happens entire test becomes useless

  • @anuchaudhary5275
    @anuchaudhary5275 2 роки тому

    using which software did you make this

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  2 роки тому

      Blender

    • @anuchaudhary5275
      @anuchaudhary5275 2 роки тому

      @@CuriousCivilEngineer can you provide it's 3D model

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  2 роки тому

      Yeah sure I will check if I still have it with me. It's been year. If I find it, I will send it to you. Give me ur email id.

  • @chemicalanalysislab5950
    @chemicalanalysislab5950 3 роки тому

    you can share a calculations of plate load test report

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  3 роки тому

      These are not mine but I hope you can find what you're looking for
      www.researchgate.net/publication/322797182_Final_Report_of_the_Plate_load_test_at_IBN_FIRNAS_HOUSING_COMPLEX_PROJECT_in_Al-Tajeyat_District-Baghdad
      www.researchgate.net/publication/322869605_Final_Report_of_the_Plate_load_test_at_Al-Jaddiriah_Mol_Baghdad-Iraq

  • @riyajjr628
    @riyajjr628 3 роки тому +2

    🙏❤

  • @vivektripathi2087
    @vivektripathi2087 2 роки тому

    Thank you sir!! 👌

  • @gajendrakumar3795
    @gajendrakumar3795 2 роки тому

    👍👍

  • @teolindopacheco9952
    @teolindopacheco9952 2 роки тому

    could it include subtitles spanish?

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  2 роки тому

      Will try to include if possible but I don't know Spanish so i will just let Google translate handle this.

  • @patidar2567
    @patidar2567 4 роки тому +1

    Waaaw sir great video. when you explain any topic just add background music

  • @Unknown_gamer_77092
    @Unknown_gamer_77092 8 місяців тому

    Thanks for explaining
    Voice is similar to sachin tendulkar 😂

    • @CuriousCivilEngineer
      @CuriousCivilEngineer  8 місяців тому

      You're not the first one to tell me that. Some say my voice is like Rani Mukerji 😂

  • @hotcupidpanda9640
    @hotcupidpanda9640 Рік тому

    Can't understand sorry 😓

  • @arjunsaregamapa6565
    @arjunsaregamapa6565 6 місяців тому

    Hi❤

  • @akshaysonar1625
    @akshaysonar1625 Рік тому

    Very low voice