Sanooer Tow Mirror WIRING the lights 2019-2022 Chevy silverado 1500
Вставка
- Опубліковано 5 жов 2023
- In this video we finally wire the tow mirrors that Sanooer sent over to me.
If you have already purchased these mirrors, Reach out to them and they can try to get you a solution.
You will need to purchase
Pins, butt connectors, T taps and Jumper harness.
amzn.to/46b8gTL ( pins and crimp tool)
T tap with jumper harness
amzn.to/3ZKG8nY - Авто та транспорт
Awesome needed this
Could I just do jump the body control harness black and grey modules to just get the Cargo lamps to Work instead of messing with the three wires ?
Well for starters, they don’t have exposed terminals , but a plastic plug with three wires attached into it! Possibly the company sent the wrong wiring hardware , so now I am be challenged to find a solution for the lighting. As far as installing the mirrors, that was the easy part.
What have you found? Nobody has bothered to mention what size pins to buy. Nor has the company shown any link to a plug and play harness. This is a little upsetting.
What size terminal ends and how do I get body harness off to run the wires?
Soooo where does blue wire go on the driver side? And what function does that do? Thanks
Anyone else have issues with the cargo lights? I did the T taps and jumper wire but sometimes they work for a while, then stop working. Recently they stopped working again so I pinched the taps a little tighter and played with the wires and they won't come back. Anyone else have this issue?
My puddle lights are staying on did you have any problems like that
Will these mirrors work for the 2023 Silverado models??
Is the glass press fit
For easy replacement
Where can I buy wire pin connectors for tow mirrors and how to order for chevy silverado
Any luck you know the pin size? Alberta canada had been not fun looking for them. I'm going to try amazon. Just need some info if you have a moment please sir.
Just ordered a set of tow mirrors for my 23 Silverado RST, from a different company, and I did order the wiring harness from sanooer to give me the mirror functions, great video, will definitely watch again when my parts come in!, thanks bub!.
Was the harness from sanooer plug and play?
@@logitechsteve1 yeah, no wire diagram or anything with that harness, but I was able to watch a video from a guy that had boost auto mirrors and harness.
@@randymorehead8021 very nice, I actually bought the sanooer one and the boost auto one and will prob use the boost harness because it seems to be the better option. Glad yours worked though. What features of the lights did you get to work
@@logitechsteve1 turn, clearance, flood lights , gotta figure out how to get the puddle lights to work. The harness I got was $95 from sanooer so lot cheaper than boost with the same features, my harness felt and looked good
@@randymorehead8021 was there any instructions with it?
Did yours come with the spade connector for the cargo lights? Just got mine and I only got the 3 wires that were connected to a black connector. Completely lost on what to do now. I haven't wired it up yet since I was unsure.
Mine were the same. I’m checking back now in the comments to see if anyone has figured this out. I contacted sanooer and told them the issue. The only response they had was to offer to sell me two wire harnesses for $90 each instead of tell me what the stupid pins are called for the 3 wire harness they provided.
Great Tutorial. I finished mine today and I'm super happy!!!
I installed the long right door connector incorrectly initially and I had an issue with turn signal then also safety restrain message on the dash board.
After reinstalling it properly it is now functionning correctly!!!
My original small side mirrors didn't have the puddle lights. Everythink is working excuding the puddle light.
Do you have any tips to wire the puddle lights correctly!
Thank you again for your help...
Where did you plug the blue wire on driver side?
Are the marker lights amber or clear?
Was this done with the wiring harness Sanooer sells on their website? Or did you just totally wire these on your own
what size lift ?
I do appreciate this video as it is the ONLY one that covers this mirror manufacture. The Dupont connectors (2.54mm) that you have provided an Amazon link for, they seem to be too small. They are not seeding and falling out of the GM OEM connector after engaging the pin lock. Are the 2.54mm female pins what you used or is there a different size you had better luck with?
Hey curious to know what you did? Did you use the 2.54? I am having same problem?
Did you had any problems with your ac after you plug the driver side in. Mine is sending a wrong reading to the ac from the sensor. Please advise if you know. Thanks
I’ve had the same issue. Have you found a solution?
wish the ones i bought from them had the power fold only down fall
How did you get the harness off and are those flat or round ends you put on the wire for the mirror?
How did I get the harness off of where?
Just Installing mine. They came with the red,black, blue wires all connected in a black connector. I’m not sure if the pins inside that black connector are the right pins I would need or if I need a slightly different style pin.
Yeah I didn’t use that one
I just used the three wires that were like flying leads
That’s how mine came.. should I just cut the connector off to free them?
@@doma4860you can depress the top of the pin and the connector will pull out of the black connector.
@@chilebaggsyes now I see that after I got the mirrors out
Awesome Video! Thank you for walking through it all. Question... Did your tow mirrors come with puddle lights, and if so, was the additional wiring all that was needed to make those work as well?
Yes it came with puddle lights and no additional wiring was needed for it
@@N54_Do where did you find those pin connectors? I keep looking online and wanted to exactly what kind was needed and make sure I get the right ones. Thank you for the video hopefully get back to me soon!
Did you have to upgrade the fuses ? My running light keep blowing a fuse
Were you able to resolve this issue? If so, what did you do?
Thanks for the review! Do the running lights stay on during the day as well?
Only when the headlights are on
They're tied to the running lights. You can turn on your foglights without headlights and the mirror running lights will turn on.
So I just did one side and the blinker in the mirror is working but running and cargo lights not working
Are the lights in the on position? I made that silly mistake at first lol
For the cargo lights, you will need to jump those two wires on the BCM under the dash with the t taps. Make sure those connections are good. Hope this helps
I have a 2022 WT and there’s a black wire in pin22 already, had to abort mission until I figure out the schematics
Boost auto has some good videos on the schematics
@@glocksamust I watched the boost auto for my 23 RST and they were wrong the entire time I wound up finding another video that a guy did on his 19 trail boss and it worked for me
Do you have a wiring diagram with all the pinouts you can share?
Hey, checkout boost auto
They have a video with good wiring schematics that will also work with these mirrors
How do you turn the cargo lamps on and off ?
The cargo lamps switch
Your watch tells me you have been in the military 🤔 also still no issues with vibration or anything coming from the new mirrors?
Lol 😅
No issues so far, no crazy vibrations either and I live in Colorado so the roads aren’t the best too.
My harness has the white square connection to plug into back of mirror
But did it also come with the three colored lead wires? I didn’t use that other one 🤷🏻♂️
@@N54_Do yes 4 wires. Black red blue n white
You should always start with "Disconnecting the Negative Side" of the Battery. You are telling people to insert New wires into the Connector, then tape them up to feed back into the Grommet and Boot. "Disconnect the Ground of the Battery, No New Shorts caused. Butt Connectors, try and make sure each end of stripped wire touches the other stripped wire inside the Butt Connector. Do Not rely on the Body of the Butt Connector to make the connection. I have in the past place the Butt Connector on One wire and let it sit down one side, put the two wires together and twist the wires together, then slide the Butt Connector up and over the twisted wires, then Crimp, and Pull check the Crimp, lastly Heat shrink the Connector. Many, Many Years of this type of work on Hundreds of Public Safety Vehicles.
😮💨😮💨😮💨
🙏🏼
They look bad on the 1500 like too big and ugly