I have a 2001 SeaDoo RX 947 please can you tell I changed the engine supports and I don't know where the green hose that you show in the video goes, the drain hose I only have it connected to the engine but I don't know where the other end goes
I finally found that Port. It is directly underneath the steering cable that goes to the back. Very difficult to find. Even more difficult to get a hose and a clamp-on.
Not entirely sure but I think you can match it at ace or other plumbing store. For the 951 ..the part is 293 710 066. You can try a few brass ones from Lowe's/hd. That area is low heat and the inner nipple size won't matter ..teflon tape is your friend.
This is an amazing video I can't thank you enough for putting it out I just picked up a ninety-eight and ninety-nine ski it set up exactly like yours is my only question is where does that lower cylinder drain hose go mine is also right into the back of the ski admittedly these are basket-cases my question is where does it go?
There is a small nipple in the back wall of the ski for the drain, it's down low. May be hard to get to and may need to take out the water box or part of exhaust. Just needs a zip tie on it or simple clamp.
McMaster Carr for most of those .. but I would recommend regular automotive hose to last a lot longer. The clear lines for water tend to mildew and darken over time.
I have a 2001 SeaDoo RX 947 please can you tell I changed the engine supports and I don't know where the green hose that you show in the video goes, the drain hose I only have it connected to the engine but I don't know where the other end goes
There should be a nipple on the back transom wall down low. It connects into the exhaust port
I can't find my exhaust port connection....
I finally found that Port. It is directly underneath the steering cable that goes to the back. Very difficult to find. Even more difficult to get a hose and a clamp-on.
Do you know size of the brass drain fitting? My rebuilt block is missing that fitting…
Not entirely sure but I think you can match it at ace or other plumbing store. For the 951 ..the part is 293 710 066. You can try a few brass ones from Lowe's/hd. That area is low heat and the inner nipple size won't matter ..teflon tape is your friend.
This is an amazing video I can't thank you enough for putting it out I just picked up a ninety-eight and ninety-nine ski it set up exactly like yours is my only question is where does that lower cylinder drain hose go mine is also right into the back of the ski admittedly these are basket-cases my question is where does it go?
There is a small nipple in the back wall of the ski for the drain, it's down low. May be hard to get to and may need to take out the water box or part of exhaust. Just needs a zip tie on it or simple clamp.
Do you know what the red cap setting should be on the water regulator for 2001 seadoo xp?
I do not and it's a complicated subject. Best to leave it factory. I've heard 3 full turns out from bottom, I've heard 2 clicks out from flush.
Where did you buy all your lines from?
McMaster Carr for most of those .. but I would recommend regular automotive hose to last a lot longer. The clear lines for water tend to mildew and darken over time.
What size are those rave valve black lines with yellow zip ties
Rave *
𝓟Ř𝔬𝓂𝔬𝐒ϻ
No English ..no help