Buying and Upgrading the CHEAPEST Drum Set on Craigslist
Вставка
- Опубліковано 16 вер 2022
- Drums are expensive, but does it take to make a $100 drum set sound good?
Patreon: / rdavidr
IG: / davidraouf
Gear Used in this Video:
Drum Key:
amzn.to/3BpYleK
- Drums/Cymbals -
Sound Percussion Drum Set
Agazarian Cymbals
16" & 20" Sabian B8:
imp.i114863.net/DVo1Gy
18" Zildjian K Custom Special Dry Crash:
imp.i114863.net/WDD4xn
20" Zildjian Crash of Doom:
imp.i114863.net/7mLQ5O
21" K Custom Special Dry Ride:
imp.i114863.net/DVWEgy
- Sticks/Heads -
Vic Firth Freestyle 5b Drum Sticks:
imp.i114863.net/045EO
Remo Pinstripes:
imp.i114863.net/LP5ovj
Remo Ambassador Clears:
imp.i114863.net/mgEmkq
Remo Ambassador Coated:
imp.i114863.net/yRML33
Remo Ambassador Snare Side:
imp.i114863.net/Wb2zA
- Microphones/Headphones -
Earthworks ICON Pro:
imp.i114863.net/7m6D5O
Pair of Slate ML-1 (as overheads):
imp.i114863.net/vn663A
Austrian Audio CC8 (as rooms):
imp.i114863.net/yRvLOv
Earthworks DM20 (toms):
imp.i114863.net/x9KmkO
Earthworks SR20LS (snare top):
imp.i114863.net/QO9Gyz
Lewitt DTP 640 REX Bass Drum Mic
imp.i114863.net/jW3Odn
Shure SM57 (snare bottom):
imp.i114863.net/DVeNMj
Austrian Audio Hi-X60 Headphones:
imp.i114863.net/kjvgKx
Earthworks DK7 Drum Mic Kit:
imp.i114863.net/mP25y
Can You Make a $100 Drum Set Sound Good? This is something I wanted to figure out after asking if I could make a kids drum set sound good. I wanted to see how much money it took to upgrade a used drum kit I found on craigslist. The kit is a basic beginner drum set you would find at any music store. It's a Sound Percussion Labs kit and came with the stock snare drum and Agazarian cymbals. I started off with tuning the stock heads, then replacing them with new heads and upgrading the cymbals a few times. Pretty simple to do, but kinda pricey!
!!Please be aware of scammers pretending to be me asking to message them. If you see any, report them!!
*What type of heads did you have on your first drum set?*
Consider supporting on Patreon: www.patreon.com/rdavidr
I had super beat up Aquarian heads
I found a garage sale on craigslist. It started early. I stayed up all night.
Scored a 270$ Pearl mid grade set, (blonde, raw finish). The bass was obviously darker cherry. He sprayed it with primer.
4 pc. Matching blonde snare.
A ride crash and a crash. Hats with stand.
I still sit on an office chair turned to a corner seated position. 50$ double kick pedals. A 45$ snare stand.
Full set B8 pro for 99$ at pawn.
The icing though was when i put the Evans Level360 hydraulic heads. Im very very content.
NARD (not a real drummer)
Thanks for all you inspired. Lol. I think it was you that let me see... used drums still play fine. Affordable.
3
I think i had the original pearl (export series) mixed with some other type, but really don't know anymore. I just wanted to play the shit out of that set! Years later i actually learned how tune drums... and i'm still learning :)
Beat up red hydraulics.
I was actually surprised that the toms sounded halfway tolerable at the beginning. Not too bad for $100
Yeah I have this kit with emperor heads and it sounds great!
Can’t like, nice comment
Cheap kits does sound great, but are not as durable
nice sounding room makes most of that tone
@Fantomas Shin Long hehe don't worry, they break if you dismount/mount them a lot, like in a band, but in your bedroom it will last years 👌 cheap kits Can often be a bit more hard to tune and stay in tune ;) (saying cheap I talk about 100-150$, 400 is already quite good 👍
Better question is how easy is it is to make a $5,000 set of drums sound like a $100 set😵
Happens a lot unfortunately
...and much easier to do apparently...
It's all in the hands.......
Easy, put me behind the kit
@@metube3489 Haaaaa! Best comment 🔥😂
Ask Lars Ulrich
those cymbals it came with sounded surprisingly acceptable, ive gotten cymbals with used kits made of brass or even painted sheet steel that turned into tacos if you hit them long enough. they sound great in stacks though.
the ones that came with my Ludwig Pinnacle kit bent into tacos, so I took it further and hand rolled them into burritos. They kinda sounded like shitty cowbells after that lol
My first band in high school, our drummer and I had the idea to turn his cheap bottom hi-hat into a makeshift china cymbal until he could afford one, and it sounded so trashy on breakdowns that he kept using it until it broke lol 🤣
@@Gatchi shoulda made a DIY version of the sabian V-wave
They're Agazarians, Chinese B20 cymbals, I would say they are better than the Sabian B8s he bought as an upgrade.
I used to have that offensive "crash ride cymbal" 18 scimitar fm zildjian. Then i was able to purchase the sabian B8 ride, 20", a 17" 18" crashes AAX, one paiste 16 inch china and some splashes 8, 9, 10, 12 inches
0:12 Stock
2:56 Stock fresh tuning
6:19 New heads + cheap cymbals
8:31 Better cheap cymbals
9:18 Even better cymbals
you forgot:
2:35 baby bearded rdavidr
Thanks, that's very helpful! I was hoping he would do a side by side comparison at the end, but this works as well. To me it sounds like new heads + cheap cymbals made the biggest improvement.
While I am far out of the "beginner" stage of my drumming journey, I have to say this is probably the most helpful all around video for beginners. It covers pretty much everything you would have to know in a clear, simple way. If I had seen this as a beginner, my life would have been so much easier, and I've seen a lot of videos for beginner drummers!
It didn't sound bad to begin with. I've heard many drummers live with WAY more expensive drums that didn't sound that good. Good heads and tuning truly makes a WORLD of difference.
turn the drum kit into furniture, tables, lamps and flower pots etc. and see how much you can sell it for
Thats what i did with the Export set.
Not everyone can spend thousands of dollars right of the bat. Specially for like a hobby or beginners that are going to sound bad anyway even with a 5k drumset. I think this is a good advice for people who want to upgrade their $100 Craigslist drum little by little. And in a couple months or years, after they have nice hardware and cymbals, they could upgrade the drum shells and get decent ones.
@@jazzfearpeople used to say that was called "arting" on something. It's no longer original and worth very little. It's worth more as a functional original with little put into it. People ruin everything they touch it seems trying to make something into fashion statements.
I think what’s cool about drums is you can indefinitely upgrade your kit over time wether it be the heads, hardware, cymbals or eventually shells
Once you upgrade the shells... ShipOfTheseus.mp3?
@@xCr00k3Dx that’s what I’m saying
*Whether
True, but always try to get good cymbals as soon as you can!
It's easy to make a cheap drumkit sound good, but it's impossible to make cheap cymbals sound good.
They will simply always sound cheap because of the material used.
I built myself a really nice kit upgrading 1 or 2 things at a time.
I started with a beat up Stage Custom and ended up with a AHM with Paiste 2002's and a Black Beauty 2 years later.
The kit grew with my abilities as I replaced a component with each milestone i reached or extra bit of cash I had.... I still suck at drums but at least I've got a really nice kit to suck on.
for the cymbals i’d recommend the wuhan b20s, the pack that comes with hi-hats and a ride is less than 250 bucks
@@rensjanssen1172 A well-known brand name doesn't mean all cymbal lines are good. ´The 101 series is crap. The wuhans sound at least ten times better.
@@Hannibu Yeah. It was my first series. Weakest cymbals i`ve ever heard.
I don’t know which Wuhans I got, but I just found the cheapest ones that were what I wanted (china, 3 splashes, a crash) and then got a Meinl HCS big bell ride, since Wuhan didn’t make a big bell that I saw.
I am completely happy with how these sound. But, I also play black metal, so quality isn’t the biggest priority, just getting it done is, and the wuhans get it done.
@@user-dw4qm2on3b Wuhans are not durable for hard hitters. Recommended for medium and easy hitters.
@@ivanbajovic3476 i`m talking about the sound of paiste 101
Man, this takes me back. I bought my first SPL kit as a high school freshman because of your channel. Now I'm a senior in college and I have music coming out with my band and live shows in the coming weeks. Never would have gotten here if I didn't follow your tutorials on how to really have fun with drums.
These are my favorite videos you do. Drumming on a budget hacks and tips. You are definitely a tuning master and play very well. Love your videos, man!
I bought those exact drums brand new from guitar center for $150. Changed the stock heads to the remo black suede heads, gave them a good tuning with remo muffs, n they sound as good if not better than any other high end kit that I own. Paired with a set of Meinl dark mode classic cymbals. They’re almost my favorite kit I have 👍🏻
I bought a kit to learn on about a year ago. A wine red Pearl Roadshow 5 piece. Sabian Commuter cymbal pack with an extra 16” XSR crash and an SR2 22” ride. Upgraded the hihat stand and kick pedal to Pearl 930 hihat stand and a Pearl p932 double bass pedal. Put a pair of Trick ultralight aluminum modular beaters on it. Put Aquarian heads on the top and bottom of every drum. I also got a full Audix D series drum mic kit along with an 8 channel interface. Built over 150’ of Mogami/Neutrik cables for all the mics, even got the color coded Neutrik bands for the XLR connectors. Got mic boosters for a few of the dynamic on the kit. The only thing left I had to upgrade was the throne. Fast forward to now and I had to move into a townhouse (our 5th move since Covid began) and my kit is broken down in the corner. I had barely any time to develop anything and now I’m just more depressed than I usually am. Quiet practice isn’t an option. Walls are paper thin. My son just joined middle school percussion though so I look forward to giving it to him if we have the chance to move to a proper home before he becomes an adult. If not, I’ll just donate it to the schools jazz band :(
I loved my kit just like that. Brand new it had clean interiors and edges. Round shells, tuned up nice with real heads.
I love your friend's drum room at 2:20! I had a rental house years ago with a dining room that had that wood on the floors and walls. It was the perfect drum room!
totally agree on the "learn to tune a drum" aspect, theres plenty players round my area who come to me for tuning their kits or tuning advice because theyve learnt to play but never learnt how to properly change and tune drumheads.
local drummers love how my kit sounds, and i told them its all in the head selection and tuning :) i have aquarian force ten batters over classic clears on my toms, superkick 2 over ported regulator on the kick, and coated focus-x with power dot over hi-performance resonant on the snare, and the kit is only a cheap tama rockstar :)
I think your recording ability is so good that the kit before any changes were made sounded awesome awesome 😂
Beginner drums typically don’t project as loud as the high quality drums do. That’s pretty much the main difference. Like you said - good heads/tuning, and good cymbals is the secret to making any drum kit sound great 👍🏻 💯🤘🏻
The internet needed this video. You can do so much with a cheap kit, some tuning skills and decent heads.
The transformation of that snare with the new heads was pretty spectacular. It sounds killer now.
I think the new heads on the floor tom really opened it up too. but, I think the toms sounded more open and resonant with the original heads.... maybe weird but that's what I hear.
Spot on, another winner and getting better everytime.
I found this exact model kit (only it was missing some pieces) from a Goodwill for $85. I bought 2 cymbal stands on eBay for another $90, a snare stand for the Tom drum for $25, and that plastic and felt piece that goes under the hi-hat for $6. I then topped it off with a Paiste 2002 18" for ~$170 and an old Meinl HCS 20" Ride that I had lying around. I love the way it sounds, but new heads will be my next step when I can afford them, lol
Glad you got your kit to end up sounding awesome as well; great vid!
As a very young player, I had a no-name blue sparkle kit as that's all I (and my folks) could afford. I spent HOURS tuning that kit, trying to get it to sound like the radio (this was before CDs). Learned a lot about tuning, for sure. Saved my money and bought Zildjian A cymbals, which made the kit sound better, and heads (Remo Pinstripes - even the black ones; remember those?), which made the kit sound better. Now that I can afford much better drums, those tuning lessons (and Zildjian cymbals) have come in handy. This is a long-winded way of seconding your message! Fun video. Thanks!
I’ve used my Sound Percussion crappy drum set for over 5 years, I took off the plastic wrap, painted black with a splatter paint finish, got hydraulics on the toms, B8 ride, stagg crash ride and zildjin zxt hi hats, toss a blanket or a pillow in the kick and a Ludwig Supralite as my only major upgrade, I love my kit and I’ve tried upgrading and only sent new drums back because it wasn’t the drums I know and love, I will probably use this set till it breaks, your gear doesn’t have to be perfect or expensive, use what you have and find your sound
great message!
That is the same drum set that I have. Mine has remo ambassador heads, 2 splash cymbals, a cowbell, a tambourine, a hi-hat, a drop clutch, a crash cymbal, a trash crash, a ride, a pearl shortfuse snare, sambago bells, the snare that came with the set, the Tom's that came with the set, and the bass drum that came with the set. All Zildjian cymbals. And it sounds very good.
I'm an old guy that just got interested in drums, In searching for how to videos I came across yours. I really have enjoyed 4 or 5 videos so far and have subscribed. Please talk about your church service drumming. I also enjoy hearing you drum compared to others you have filmed because you actually play a rhythm, instead of just wacking all the drums in erratic patterns, if you know what I mean.
Also really enjoy watching you fix things that are broken etc... Keep up the good work. I'll be viewing more.
Everything really adds up specially the combination of mics, lighting, video and audio post production. It feels like I'm in the room! Thank you for sharing this information.
Glad you like it!
Dude.. you are actually a really good player. I liked the playing clips
You should try hammering the b8 cymbals yourself. In my experience that alloy is really easy to deform without cracking them and honestly they didn’t sound too bad 🤷♂️
You sir are a godsend. Glad u r out in percussive cyberspace. Thanks.
Great video. I’ve just done something similar. In the end I bought used Remo UT heads off eBay for the resos, recycled some pinstripes that I’d changed after a few years on my main kit (they weren’t in too bad shape) and fitted a hydraulic on the kick. End result? My wife said my main kit sounded far better than the cheap kit. My first kit went through loads of heads to find the right sound, it was only when taught how to tune that I actually started getting a decent sound, by that point I’d moved to a Mapex Pro M and found it suited coated emperors or G2’s ( I really can’t tell the difference in sound). Cymbal wise if you want a decent sounding semi budget cymbal and don’t want to risk used Paiste PST7’s or Zildjian S series are both safe bets although they are still very expensive.
3:32, it’s just striking me how strange and small the world is! Being at my hometown Sam Ash, and talking with someone I used to be on the line with. (Also I remember you teching our indoor ensemble that one year! Godwin 2015? 2016? It’s been a while)
Fun video, love to see renovations to cheap kits made better!
I sold MANY of those Sound Percussion kits when I was dept mgr of drum dept @ guitar center some 8-10yrs ago. Lots of value in those kits even when new, and they can sound decent. Love your budget minded videos for drummers it makes us all think about new options! Maybe try some of the newer SP kits (really curious about their Velocity series - birch, trick hardware, cool finishes) and maybe try out some cheaper b20 cymbals like Saluda, Wuhan S/Akoi, Dream, Aqua, Masterwork, Soultone etc. Keep up the great work sir! Btw nice first name ;)
I just picked up a set of Sound Percussion drums with Evans EC2s heads on the Tom’s and an Evans Emad base drum head, a complete set of Sabian XS20 cymbals and all upgraded hardware for $400. Tuned them up and they are now my rehearsal/practice set. For a cheap set of drums the upgraded heads and mid range cymbals make it sound really good.
Years ago, I traded in a Pearl Drum X kit for 4 drums only (3 toms an a kick) worth £100. I immediately put decent heads on them, tuned up properly.
I rack mounted them, along with cymbals, snare an stands (which I already had).
The kit sounded awesome.
Coat the bearing edges with paraffin wax. Helps smooth out defects and helps seat the heads better
Better to sand them smooth first
@@iRideuWatch can do both. The original Camco drums from Oak Lawn, Illinois shipped with paraffin wax coating on their bearing edges.
I had that exact sound percussion kit for years. Much like the video, I just made small upgrades over time. Good heads, Good cymbals and hardware, etc. I ended up having that kit as my only kit for about 9 years before I bought a proper Tama kit, and I still have it set up to mess around on. Just because its cheap, doesn't mean you can't sound good.
Nice man, you make really cool videos, love to watch them!
Id be interested in hearing them with a jazzy tuning. Maybe some kind of modding for the shells and then resell it for more?
Greez from germany!
I honestly thought the stock cymbals sounded decent and they also looked surprisingly good...
yeah I was kinda surprised too, the hihats blew me away especially being 13"
@@rdavidrI need that crash!😂 Do you know what brand or whatever it is?
@@jaidenwbrAgazarian 16 in crash, amazing. cheap and i have one myself
@@joshonthekit thanks man
You should do a flip drum series where you take drum kits and improve them then sell them for a profit kind of like seths bike hacks flip bike series but obviously with drums
You totally nailed it... tuning, heads and cymbals
Always excited for new rdavidr content !
As someone who has only been drumming for a few months I have to say getting those cheap second hand cymbals and replacing the crap ones that came with the kit made it sound soooo much better and it cost me under a hundred pound
I went through a process of trying out several different heads after getting my newest kit recently, and I like to think I've gotten better at tuning because of this latest venture as well.
I've used mostly Pinstripes for the past twenty+ years, and wanted to try something new, so I tried out almost all the different Aquarian series, starting with Hi-Frequency-coated on all 7 drums, then tried several Evans series, but when I put a pinstripe back on one of the toms and compared it with others side by side, the pinstripe just sounded better, with an almost wet-like attack and deep shell sound. I spent so much money trying new heads and ended up right where I began and now I wouldn't use anything but pinstripes. Great video as usual!
I say Evans Hydraulic heads are the only way to go to get that Great '70's sound! They are probably the easiest heads to tune properly for a beginner to start learning about what NOT to do. IMO, the resonate heads are way more important than the batter as far as the final sound of your kit goes. Tuning the top and bottom heads to the same frequency (I recommend using a Tune-Bot Studio for accurate measurements), will give you the most resonance that the shell can produce and it will offset the dead sound that the Hydraulic heads make thus making ANY shells sound fantastic!
I remember my first cymbals were Agazarians way better than expected. What a flash back to see.
Your playing is always the highlight for me ✌🏼
The Tom's actually sounded pretty good with the original heads, tuning is key and i learned that in the early 90's when I started playing on my CB700
Awesome video. So much excellent advice. Learn a tremendous amount from this site. Thank you!
Excellent video and great tuning tips! Thanks, man!
i love this man and channel lol. another amazing video thanks for the tips my dude ! 12/10
I did exactly that a few years back. My friends told me about the "Campfire Jams" going on at the Wanee music festival, an Allman Brothers event in Live Oak Florida. I wanted to take a drum set for the jams which are held outside near where all us ABB fans hang out. I didn't want to take my best kit so I found a friend who had a Peavy drumset and her son wasn't playing it. Got it for 100 bucks, took it home, took off all the heads and hardware and repainted it hippy style so it would look good at the fest. Put it all back together and it sounded really good considering. Brought a vintage Slingerland snare drum and just used the cybals that came with the set and it sounded really good amazingly enough. Had several drummers use it and even got to jam with some of the guys from Dickie Betts' band.
I have used it at gigs since then a couple toms and it actually rocks! I have never been one to use all the tricks to tuning as in this video, I just got it where it sounded good and left it the fuck alone!
I love the philosophy here. Heads and cymbals really govern a lot of the tonal landscape. If you learn some tuning you can get in the ballpark. Using cheap 16" Hi Hats sounds better than cheap 14" hi hats is another great trick. It's great what you're doing to help people not spend money (says a guy that spent a lot of money on his kit). Bravo
All you need now is a Tune-Bot Studio, and you're good to go !!! Best $99 i've ever spent on all of the drum gadgets that I have acquired through the years. Makes tuning FUN, and interesting; but the best thing is repeatability and the fact that your kit will always sound the same.
@@billdrummer1197 then how will you evolve your craft?
@@JosephTavano The Tune-Bot Studio IS an example of the evolution of the Art of Drumming. Do you NOT agree??
@@billdrummer1197 That's right. I don't agree. It's a little gadget. It's not an evolution of the art. Get real. People have been tuning drums just fine for centuries and will be tuning them just fine after. If you can't tune your drums without a gadget, then get the hell off the comments, shut up, and educate yourself. It's not hard.
You can also modify the B8 cymbals to sound less glassy and drier. I've hammered an 18" B8 Pro Medium Crash and it was fun to crash ride on since the overtones were more controlled.
how did ya do the hammering? Some B8s sound awful some sound pretty fair.
@@forthefunofit5487 I took a lot of tips from Lance Campeau's The Cymbal Project. B8 cymbals are more forgiving since they're more malleable than B20 (the expensive stuff).
Generally, more hammering around and near the bell, less towards the edge. Maybe some deep dimples on the outer parts to give it more trash/ballistic crash effect. Too much hammering will dull and muffle the cymbal as the material will tense up and not resonate/flex much. Though they would make great stacks pieces.
I took a Sabian B8 10" Splash and a 12" China Splash and hammered them quite hard tona refined china shape. Put them together and you get a clap stack. The 12" by itself sounds great on its own, though it doesnt have much volume.
Getting good at tuning is definitely a journey. Small steps, start on a cheap or old kit. If you can make those sound good you'd make anything sound good. Currently looking at buying myself a custom built TAMA Star going to be nearly $16k. After 22 or whatever years I feel like I've earnt it.
The change in the snare with new heads 🤯
On cymbals, if you are fortunate enough to live in an area like me, they have stores specifically for selling and buying used equipment including cymbals.
I've been playing since 1980, and i have always preferred used cymbals over new, they are already broken in. and unlike many box stores, the places that sell used usually don't have an issue with you testing the cymbals to find the sound you are looking for.
Pinstripes and tuning will make any kit sound awesome!!
Thanks for the video Wolfman
Perfect distillation of all the best beginner buying advice. As for what to do next with these, how about a cheap "alternative" wrap job? Shelf paper, cricut vinyl, faux leather from the fabric store, etc. One of my favorite wraps I've every seen was plush orange acrylic fur. The drums looked like Muppets. It was fantastic. Maybe take this project the next step and show how cheaply you can make them *look* good, too.
Ha! I love the idea of the muppet drums 😁
Dude when I was a kid here in Costa Rica I wish I had a set like that, that would be a dream kit when I was a kid.
bought a vintage Yamaha Power V Special shell pack in great shape for 175, an almost new set of Zildjian As for 450 and a used Ludwig hardware pack for 200. Upgraded heads for 120 so for just under 1000 I have a killer sounding kit that looks amazing too. You can get it done for 1000 if you shop on offerup in almost any major city.
This is maybe one of a handful of videos of yours I’ve come across, and you’re the only person who uses two keys to tune a drum and, honestly, it makes sense. I’m probably going to head to my local GC to grab another, just cause.
That was a massive improvement!
Even before you did anything to it you managed to make it sound incredible sir. Proof that a lot of the sound is in the player too.
Dont get me wrong after youd buggered about with it the sound was great but again i think a lot of that was down to the playing.
Top job again sir
I think you did a nice job improving the kit. Bravo
They sound quite good. Tuning and new heads beautiful
The secret behind cheap kits is make sure all the metalwork is tight . I paid £20 ($30) for a kit ( might be a Session Pro ?) for use as a static set for multi band use on a ' bring your own brass and throne ' basis , on the grounds that any kit sounds good with good brass . After tightening cleaning departure angles ( except for steel snare shell !) ,fitting polymer washers under the tension bolts , I fitted Evans 360 NOS coated 2 ply batters on the toms and snare as a kit that was on special at a throw away price, placing the old practically un used clear singles on the reso side . The 22" kick batter was in good shape but wimpy , so I coated it with a textured spray paint which damped it nicely and hot canned a hole in the reso ( stock but tightened until it was wrinkle free . The main improvement came from installing a second pair of legs on the kick from a scrapper shell , lifting the batter rim just off the ground and free floating the pedal . Makes a huge difference in response and does not require micing at most venues . About a dozen bands go through the kit at any one festival , all being impressed with the sound . One guy brought his mega buck custom walnut and maple stave snare and changed out my steel one , as a result it could not be heard in the mix . I too tune the snare to a G3 + to cut through anything with a satisfying poing that works well with all genres , not just reggae ! I agree , its a waste of time trying to tune a kit to some famous drummer set up , just prat around with what you have got and arrive at the tuning that sounds best for the shell . Even cheap shells have a sweet spot . Tune the rest to suit either up or down or matching depending on what sound response you are looking for .
I'm no drummer but I know what sound I like to hear from a kit and this one was around £70 ($85) all in .
Id like to see you chop one of the rack toms in half and make a snare out of it. You did one years ago, another one would be cool, particularly focusing on how one could get a decent bearing edge without the best tools.
Absolutely correct about cymbals. You can make a cheap drum set sound good, but a bad cymbal is a bad cymbal no matter what you do. I learned that quickly when I tried to record with my set of vintage Zilco (vintage meaning old) cymbals. 14" hats, 16 and 18 crashes, 20 and 22 rides. Took me years to complete that set of Zilcos to match the year/era of the kit I still have that's pictured in my avatar from 1972 - Majestic Deluxe MIJs with alternating lugs. If I had an endless stream of cash, I really love the Zildjian K Sweet series, but that wasn't the case. I had one Sabian B8 18" I bought years ago and it recorded well, but the B8 line was OOP. I had the chance to try the B8X entry line series and those things actually record well. I don't gig, so recording is my outlet. The Zilco you mentioned in this video doesn't look anything like mine, but I know there were Zilco cymbals made decades before the Zilco line I have which were made in the late 60s through the mid 70s. They had a very distinctive low rise bell.
You've upgraded the sound, now upgrade the aesthetic! Would love to see a follow up video of how to get that plain black wrap removed and maybe something cute with the wood like a stain 😁🖤🙏🏻
I bought that same set 10 years ago for the same price used. Converted it to an electric set and it’s fantastic!
It's advisable to rub a wax candle over the bearing edges...so the drum tunes smoothly without friction/binding ...
Cymbals always make the difference!!!! Well done!
bro love the editing at 00:45
That sound percussion kit was my very first! Still have it do this day and use it as my practice kit. Stripped the wrap, stuffed the lugs with tp and some other small mods. Thing looks and plays great
You are 100% right David, thanks for that nice vid. We ought to show this all beginners to save their cash!
Your drum sound for me personally is perfect, THICC, pure perfection.
Gosh...that Zilco sounds amazing to my ears!
Sound Percussion drums were my first drumset and I still have them today 10 years later. I have Remo Emperor Coded and a B8 with a zildjian 20 inch crash-ride, and they sound great in recording. The kit doesn't matter, its only how good you can play on them and make them sound boss.
I have a Peace Genesis starter kit around $100 sitting in my dusty garage for about 5 yrs now. Tune them every time the temperature changes. Sounds on par to my Pearl export, it's crazy but awesome. Long story short, you don't need an expensive kit to practice with no matter experience levels. I personally like the way the ZBT cymbals sound over Avedis
Drums sounded amazing!!
Recently did this with a cheap set of 80's Rockers. CS Dots all around. It sounds great under mics and I don't have to worry about my much more valuable vintage kit being damaged or stolen at a bar gig.
I really love the "stock" snare sound
I love your videos, greetings from Argentina!
Margaret is killer after your upgrades! Nice job! Love your videos - so much work to create - Do you produce them 100% yourself, or do you have help? I can't devote the time it takes to makes edited videos! Love the story about the school drum! LOL! I had a similar experience with borrowed cymbals from my middle school... Man Margaret sound f'n killer!
that wide shot with you talking and messing with the drums in the back was dope
My main kit is a cb with the wrap off ...paired with 1970's zildjian avedis 14" hats 18" fast crash 16" avedis crash and a 20" AAX RIDE . 🤘🇨🇦❤
A guitar center AND sam ash next to eachother? That’s some heavy competition
When it comes to budget cymbals, you really just have to know what to get. Most beginner cymbal lines sound like crap, but there's gems to find even for low prices:
Masterwork Troy: Used the basic cymbal set with hihats, ride and a 16" crash for years when I started playing, they have a very good sound and the set isn't too expensive. I paid about 250€ back in the day, but now the set costs 400€ if you buy it new. Still a good price.
Sonor Armoni: Same deal as the Masterwork Troys, great sounding cymbals for a pretty affordable price. I still use the 10" splash I bought 15 years ago, was my first splash and will probably never leave my kit.
Meinl HCS: Hands down the best beginner line out of the big cymbal manufacturers. It's brass, so it's still hit or miss, but especially the bells and rides sound great. I'm using the 18" big bell ride as my secondary ride at the moment. For about 80€ I think it was a pretty good deal.
Meinl also had the Classics series in the past (the ones with the Eye of Horus in the logo, not to be confused with their Classics Custom series), which were pretty good value for money. They had a cymbal set with two splashes and a china for only about 100€. The china was a bit too crashy for my taste, but I still use the splashes to this day. Sadly they discontinued it, but maybe you can find some still tucked away in some dusty corner at your local music store.
I love experimenting with random cymbals for hihats, but in my experience lots of hihat combos are not great. One thing I think you missed on was talking about tuning the snare side. “Cranked” I don’t think is a helpful term. Google a timbale sound, and that’s the sound you should be getting for your snare side. As soon as it starts to get into “timbale” range, that’s kind of the low tension snare side, and then go up slowly from there to see when it starts to sound choked. Also, carefully put a drum stick under the wires to hold them off the head while tuning.
And let's not ignore the fact that these mics and (I'm sure,) the gear being used to process, mix, record, etc., are good, quality stuff. This could be a whole series: high-end drums/heads/cymbals/recording gear, combined & compared to their low-end counterparts. The possibilities are (somewhat) endless. Then, modern-day gear vs. vintage gear, in all categories. I'm smelling some possible collabs with other UA-camrs. Love your stuff, man!
Good vid. Hardware is another area beginner and hobbyist drummers end up sabotaging themselves when trying to save money. Good hardware is really important to your playing and physical health. But cheap hardware will mess you up in every way. A rickety drum throne is asking for back problems and playing fatigue. Chasing pedals all over the floor and readjusting cymbal stands all night long is exhausting. I learned that lesson the hard way when I was first starting out. I spent my savings on a really great kit but cheaped out on cymbals and hardware when I ran out of money. I should have known better by then but it was still quite a shock to realize that although I scored on a great set of shells that was only one half of the kit. I had to spend just as much money on a great set of cymbals and hardware if I wanted to get the most out of the drums.
For me the past 30 years tuning drums, most important thing is to get annoying harmonics out of it. I also like to be fast tuning my drums, so I start with finger tight tension rods, CPR the head to seat a new head to the drum not needed with used head. I then turn the key 180 degrees for reso side, 90 for batter side, and I tune the reso evenly to make a note that doesnt "wobble", I do the same for the batter side also by evening out the tension rods, I do this by ear, since I have perfect pitch. Takes me about 5 minutes to tune a drum, snare takes more time, but tuning a snare is its own beast. I like to be consistent on my tunning, since I take every tom as a note, I try to replicate the tone, especially when recording an album, between takes tuning changes and you can hear it enough to be annoying for the soud engineer, you cant hear that trough the mix with 5 dollar earbuds converted to mp3 tho... Also in a live gig, I some times just drive the tension up on the batter heads to keep the feel of the drum correct for my playing for more, than caring about the tone, after all drums are a percussion instrument to keep the rythm, its not a piano!
i have been buying a few "cheap "kits on c/l myself lately, finally going to make some different [famous] kits to play in my driveway on beer addled friday nights. those sound percussion cymbal stands are the best i've seen, got a groove percussion set recently, included an 18" zildjian china-thats going to be my gong!
Having those awesome microphones doesn’t hurt 😉
Thank you! Haha it was very fun to watch
first drum set i ever had was a sp, used it for a loong time dad bought it for me when i was 8 been drumming for 14 yrs now
I would examine if the wrap application affects the sound. First make a note of the tuning of all the drums, exact pitch/tunebot frequency/drum-dial setting etc. Then I'd remove all the wrap, put everything else back on, and tune the drums to the same parameters.
I say do a complete overhaul on them- re-wrap, new mounding hardware and spurs from Inde Drums, poly stain in the interior… the whole shebang!