Great video series man. Ive got a 446 myself that im getting ready to make one for. Thanks for takin the time to document your build. Ive got lots of ideas swirling around after watching.
I have a question for you case 446 guys,I have a 85' 446 that ran great,then suddenly won't get fuel,has new battery & plugs so I put a new fuel filter in and it's getting to the carburetor but still nothing,it starts for a second with carb cleaner but won't stay running, is a a fuel pump or the carb?? I'd appreciate any input!
hi i justmade a bucket for my old simplicity 3012, i used 11 ga. steel 10 or 11 ga. is about 1/8th thick and works well, just weld some angle iron along the corners for a little extra strength. and dont forget to use about a 1/4" thick "cutting" edge on the front that can be easilly replaced because it will get worn out with use.
@@bre86 I believe your GT is about same size. The HT-23, I have is a 23 hp Kohler. So, outta curiosity, who does the laser cutting? How much would it cost after the hydraulics and all is added for an FEL? How hard is it to do the design and plumbing the hydraulics? I don't a know a lot on hydraulics system.
Love it, you are a master for taking this on. Lee the videos coming.
Great video series man. Ive got a 446 myself that im getting ready to make one for. Thanks for takin the time to document your build. Ive got lots of ideas swirling around after watching.
I have a question for you case 446 guys,I have a 85' 446 that ran great,then suddenly won't get fuel,has new battery & plugs so I put a new fuel filter in and it's getting to the carburetor but still nothing,it starts for a second with carb cleaner but won't stay running, is a a fuel pump or the carb?? I'd appreciate any input!
Hi mate. What are your bucket dimensions and guage steel used? Really amazing job you have done. Its inspired me to make one.
L42.5", W17", H16.5" - 11 gauge sheet, 1/8" side reinforcements.
How thigh of steel did you use for the bucket ? I'll be making a loader for my Sear 4x4 project and was going to use 1/8" plate.
hi i justmade a bucket for my old simplicity 3012, i used 11 ga. steel 10 or 11 ga. is about 1/8th thick and works well, just weld some angle iron along the corners for a little extra strength. and dont forget to use about a 1/4" thick "cutting" edge on the front that can be easilly replaced because it will get worn out with use.
I want to do this for a 1971 Bolens HT-23, I really like to do a backhoe for it too.
I'm currently working on a backhoe design in CAD, that I will have laser cut.
@@bre86 I believe your GT is about same size. The HT-23, I have is a 23 hp Kohler. So, outta curiosity, who does the laser cutting? How much would it cost after the hydraulics and all is added for an FEL? How hard is it to do the design and plumbing the hydraulics? I don't a know a lot on hydraulics system.
What thickness is the bucket made of and what are the demincions?
L42.5", W17", H16.5" - 11 gauge sheet, 1/8" side reinforcements.
how are you tackling the power steering.
I'll be covering it in a later video. I used a eps from a Saturn vue.
I look forward to seeing that, its a great idea I have thought of trying it so I will watch.@@bre86