2-CH RF Wireless RC Relay Module: DC Motor Forward/Reverse Direction Control
Вставка
- Опубліковано 7 вер 2016
- This video demonstrates the simple way to control the direction of a DC motor which in this case a 12V car power window. Two relays were used to build the required circuit and in this video, a 2-channel RF wireless remote control relay module was the perfect choice to do that. The connection is so simple; everybody with or without basic electronic knowledge can build the circuit in minutes and use it right away. This video intends to give some basic idea on building a bidirectional motor control circuit and you can apply it in your own project/application.
For those who are having trouble catching up the connection for 2-direction motor control in the video, you may refer to this diagram: goo.gl/Fnsf4B. Just ignore the Arduino side as the relays themselves will be activated through button click. However, if you in case to build Arduino controlled 2-direction motor control, then this may be the diagram you are looking for.
The Arduino code to make the motor run forward and backward continuously with 2 seconds of duty cycle: goo.gl/iN7sfr.
Circuit diagram: goo.gl/rxqDrg.
Demonstration video: • DC Motor Forward/Rever... .
The Arduino code to make the motor interact with input from serial communication: goo.gl/ZqecCP.
Circuit diagram: goo.gl/u5AQKg.
(Updated on 26 Feb 2019): For 8 channel relay module: goo.gl/admrPB (pin connections are described in the code introduction).
(New - Updated on 29 November 2017) The Arduino code to make the motor interact with input from serial communication + manual push buttons: goo.gl/iPjDhZ, with help of circuit diagram: goo.gl/fLeJpF.
For those who don't want Arduino in the diagram, refer this circuit: goo.gl/kjjoKU, with truth table included.
(Updated on 1 March 2018) For those who are interested to use limit switch in the circuit (such as for linear actuator motor control), refer this circuit: goo.gl/C5ATjB for LOCAL controlled single limit switch version and this circuit: goo.gl/83mynM for LOCAL controlled double limit switch version. And for REMOTE controlled double limit switch version, see here: goo.gl/gZVRp2. Hope that helps :)
(Updated on 29 November 2018): If you want to make the motor turns forward until a limit switch is pressed, then wait for let say 1 hour before going reverse until another limit switch is found, then wait 1 hour again and repeat the process again like more or less shown in this video: • Forward/Reverse Direct... , here is the code: goo.gl/dnHLkR.
B/G Music: "Dalam Air Terpandang Wajah" - Legendary Tan SRi P Ramlee
You are the best. I have been finding out how to do 2 direction on a RC relay switch and you are the only one that did it and explain it perfectly with diagrams. Thank you very much. Keep up the good work!
+Ethan Chang Thank you very much! I'm very pleased to hear that.
It's so informational, i'm using 2 channel modul (not remote control) and linear actuator for auto open and close my motorcycle seat.
Great video!!! Thank you!!
Thats exactly what I was trying to find....how to connect a wireless in a a simple way. Congrats
Thank you & good luck for your project :)
I owe you one man. This has been a very useful video. Thank you!
Awesome video! Keep up the good work!!
Thank u so much..I was struggling with wiring for 5 days and i found your video and u saved me.Thanks again.!
You welcome, shen!
Very helpfull video...clearly seen which wire where to connect..thank u very much👍👍👌👌❤
Blooody helll my brother...!!! I am searching exactly this solution, but i did not know that i can do this short impuls reverse polarity with two receivers with SPST relays...!?
Thank you a looot...!!!!
You saved me...!!!!
+Evil Max You are welcome :)
Thank you very much.Greetings from Croatia
Dubravko Pleša You are welcome 😄
Gracias un millón de gracias por el tutorial
Muy bueno,muy útil, y facilísimo de entenderlo ...un genio
Thanks you, Mc Soyka I really appreciate it!
Wow P Ramlee song
Thank you! I was able to wire my rc winch with your help!
Welcome, Alessio!
Thanx so much
Your explanation was perfect Sir!
Thank so much Sir I'm have trouble putting this code unto my sketch, what is the proper way to put a title to this code so the board will recognize it , I'm so anxious to get back controlling my renovated 4wheels robot, thank you so much for your patience, I'm 86 year old and a bit slow in understanding all of this new stuff sometimes Jerry
Единственно правильное видео! Большое спасибо автору!!!
Добро пожаловать (Dobro pozhalovat) 😊
Честно сказать,ни чего не понял, но мне очень надо такую схему расключения.Здесь два канала что ли задействованы?
Great stuff. Thank you. God Bless.
You are most welcome 🤗
This was so helpful,😀😀 thank you
You are welcome!
Nice video, thanks!
Frib2011 My pleasure :)
but why would you use an RF relay board if you want to control it with an arduino? how would you even control this RF board with an arduino, wouldn't you need to use another type ot board with wired controls and not RF remote for arduino?
You're right. However, if the users insist to activate the relays using Arduino, they may use the relay module instead of the RF relay board. This tutorial demonstrates not only how to operate the RF relay board, but how to do motor direction control using relays as well.
Nudge Me sir please let me know your whatsapp contact number..
Hello thanks for the Helpful video, i have one question : is it possible to do a 6 pin as a backup if the remote run out of battery or any other issue ? If yes could you please explain me how. Thanks again
hello can i know where do you buy the transmitter? im from malaysia
Thanks a lot Brother 😎 just what i looked for
You're welcome 😁
hello how are you connecting the cables for the motor to raise
Thanks for the information bro👍
Do we have to connect power supply to NO and NC
I love the back song...thanks
Can limit switches be used with this board?
I wired a manual switch to a linear reversible motor then added this remote but my manual switch burn out immediately. Is there a way to use both ( wireless and manual switch) ? Maybe install diodes?
thank you so much, this video is excatly what is was looking for
So glad this video is beneficial. You are welcome :)
Yes. That should work as well.
ok
Hola!! Como se conecta para que funcione en los dos sentidos?
Thanks, good video
Good video bro.. Anyway nak tanya kalau nak set kan power window motor tu bergerak beberapa sudut darjah dia boleh tak? contoh nya CW 90' lepastu CCW 90' pulak..
hi. mi reciver stop working. The blue led indicator not turn on any more. What could be wrong?
I want to do this setup but instead of using a remote control I want to use a 12volt power trigger. Is there a way to do that with this? Or do I need a different controller?
Can I use it for 24v 250 watt DC motor ???
thnks bro! awesome
I have the 2 ch RF wireless relay module with A/B remote FOB, and connected my motor for my FOB to control forward and reverse, but can I use/place micro switches in this circuit as limit switches? I am trying to give my project limit switches when I press forward or reverse, so the armature, I'm using will rev or go forward, when the limit is reached.
Hi Nudge Me, Thank you so much for the video and circuit diagrams. I'm having trouble figuring out how to use a remote controlled double limit switch to run a higher amp motor like 30 amp. The relays on the board are usually 10 amp max.
A circuit diagram would be much appreciated if that was possible. Thanks
Hi, sorry for long wait. Try this hint: bit.ly/2Jppbdy
can we use 4 channel relay board on momentary mode to run two motors with reverse control??
Can two relays be turned on at the same time in the monetary mode??
please answer.
Hello thank you for your video, was very informative. I have a question, what if I would like to put a timer to control the motor, 5 PM open, 7PM close?
Hi, sorry for late response. To do that, you probably can use either one these options:First, use an Arduino to act as a timer. The RF relay could be replaced with a 2-ch relay module, which can be connected directly to the Arduino through jumper cables. Programming wise, you may have to use simple delay function or RTC module to implement the precise timing routine.Second, use ready made programmable timer as shown here: www.timer-switch.com/time-switch-timer-switch or here: www.amazon.com/2013newestseller-Multifunction-Self-lock-Module-Automation/dp/B00J0SMB3C. Please note that these kind of modules do not need any programming job as they are configurable through their buttons. The timer module then needs to be connected to the relay to do the reverse/forward motor control per needed.Hope this helps. Thank you.
Plzz give link to order remote control circuit
Hii sir... your provided website for circuit diagram of two directional motor control is not working or it shows webpage is not available... plzzz give a circuit dia.
Is there any way to somehow transfer the connection from the switch, to a mobile app instead? My Robotics Class is very interested in making our WiFi controlled Go-Kart and we're curious to know if that's possible.
Thank you.
Hi, have you seen this video: ua-cam.com/video/QQZ_SQd9YHc/v-deo.html This video demonstrates mobile app controls a 3WD robot, which you can change the robot to be the Go-Kart then. However, it uses Bluetooth communication, not wifi..
Can u make it to the smalliest relay
What is the exact module that you have been used, I have found some on AliExpress, but i am not sure that they are the same as one shown in this video
Would this work for a remote for my motocaddy digital s1??????
is it possible to let the motors drive at the same time, reverse/forward
Sorry, I don't get it. Do you mean you want the motor to turn forward and reverse at the same time?
Hi all. Please help me I don't know what to do. There is such an assembly through a 4-channel relay and through the switch pedals to the motors. The remote control works great. The pedal in one direction also works fine. And the Problem is that when you press the pedal so that the motor spins in the opposite direction (reverse), there is a short circuit in the relay area and even one relay has already burned out. As an option, I thought to put a switch between the relay and the pedals, that is, either turn the motor through the pedals, or through the remote control, but I would like it without a switch, that is, when I wanted to press the bullet or the pedal. Please help me how to fix this.
Muito bom 👍👈 sucesso aí família 🤝
Obrigado 😁
can i know the wiring diagram?
Whats the range on that system
I need the same thing but no rf ...I need wifi controller ..for door motor same as yours an 2 direction control....is the same way to connect??can you recommend one with wifi 2 Chanel...thanks..in amazon is possible...
Bisa di gunakan untuk kunci akses pintu ga ya?
Hi sir how to put limit switch on this project may I request diagram please..thanks
how to add end of course to this project?
Can it work to 220v energypower ?
Hi I need to connect this to my garage switch how do I connect it ?
grate work solve the r/c radio control problem heheheheheh....! grate man
You are welcome :)
hello, I want this 2-CH RF Wireless RC Relay, but I want for 240V can I find it somewhere?
Hi, you can find it on AliExpress. Example: tiny.cc/f7fzcz
if I want to put two limit switches on bout sides where I connect them. for example in a sliding small gate.
athen sam (Updated on 1 March 2018) For those who are interested to use limit switch in the circuit (such as for linear actuator motor control), refer this circuit: goo.gl/C5ATjB for LOCAL controlled single limit switch version and this circuit: goo.gl/83mynM for LOCAL controlled double limit switch version. And for REMOTE controlled double limit switch version, see here: goo.gl/gZVRp2. Hope that helps :)
Nudge Me exelent my friend thanks so much for your help.
but I want to continue using the remote control. what should I do
athen sam For remote controlled double limit switch version, see here: goo.gl/gZVRp2.
Please give us the links to buy the motor and relay modules
I have dual relay 12v model kr1202-4. And 1 remote. i reset original remote by presing a+b buttons and my remote not work anymore, please help me?! What should I do....
Epic tunes!
can we use both limit switch and push button
Yes. Refer here: goo.gl/83mynM
Bg kalo di buat ke dinamo power window , biar tombol A ( mutar ke kiri ) truss tombol B ( mutar ke kanan ) caranya gimana ya untuk modul 1Ch
one question....and to make a 12 volts Power Wheel car wireless, using low speed only? greetings
Hi, you will need a DC motor speed controller module, like as shown here:
www.amazon.com/RioRand-Controller-Efficiency-Generating-Protection/dp/B007TH4EN6
Thanks!
hello How to control dpdt with rf 4-channel 433mhz wireless remote control
Thank you so much. Please next time please with sketch/ plan.
But this is what I search thank you
one question. if i want control use it app remote control. what must i do?
You need to use Arduino and Bluetooth module to make it work with Android app.
Tanya gan......
Itu bekerja di frekwensi radio 433Mhz ya.....
Lha seandainya transmiter / remot di gantikan pake radio ht uhf dengan frekwensi yang sama 433Mhz apakah bisa...?
Thank you. Could you please share the circuit diagram of the connection?
Can I leave a directly to a 12 volt battery on my car or I have to disconnect it
Roberto trejo Hi, theoretically, it's just same as the car's central locking system which connects to the battery all the time, even when engine is not running. So, I think it would be okay to keep it connected to the battery all the time during its idle state.
@nudgeme do you think the remote alone can control a garage door ??
Yes, why not. Hold Button A, the door slides up. Hold Button B, the door slides down. If you don't like the 'hold' thing, see how to operate it in Toggle mode (video @ 3.16 - 3.21).
Good Job NM
Thanks AW
Bisa ga itu di tambah jaraknya pkai remot kontrol 3km
thanks a lot bro you saved my day
You are welcome :)
very good, i'm french and i speak english like a spain cow but i anderstand all very well, i want buy it for open and close the door of chiken house to my mother. thank you, it's a simple video easy to anderstand.
Laurent Marion Hi, very glad that this video is helpful to you. Send my regard to your mother :)
Anyone know of another website that carries this board set up? Fastest shipping for me is 16+ days !
Hi, if choose FEDEX or DHL for the shipping option in AliExpress you may get faster shipping but of course the cost would be staggeringly high:
www.aliexpress.com/item/DC12V-2-channel-rf-transmitter-receiver-wireless-433mhz-relay-controller-learning-code-wall-remote-control/32343010153.html?spm=2114.search0104.3.243.eCAVKJ&ws_ab_test=searchweb0_0,searchweb201602_1_5130011_10152_10065_10151_10344_10068_10345_10342_10343_51102_10340_10341_5000011_10541_10084_10083_10307_5080011_10539_10312_10059_10313_10314_10534_100031_10604_10603_10103_10605_10594_10596_5060011_10142_10107,searchweb201603_14,ppcSwitch_5&algo_expid=e9cbdab4-07b2-444f-bc89-b626245e9ed0-30&algo_pvid=e9cbdab4-07b2-444f-bc89-b626245e9ed0&rmStoreLevelAB=0
Спасибо за идею.воспользовался.😅
Мы рады приветствовать Вас моя дорогая.
nice video!!
OOI JING YAO Thank you!
Fantastic!
Thank you!
Can someone please write it down where to place the wires on a relay module to make a motor go back and forth
Hi.I am informing you that without your help it would be difficult to connect the remote to the engine.The package came very quickly but without a scheme.Thank you once again on your video
+Dubravko Pleša Hi I am pleased to hear that. You are welcome 😃👍
how if I want use toggle switch? How's the wiring?
ua-cam.com/video/jqV1sFDedW0/v-deo.html
What's the range man? How far can we use the remote?
coooL! thanks : ) God Bless
+Jimmy Favereau You are welcome :)
muito bom
obrigado!
Also what is the range of the remote
About 100 feet if I'm not mistaken
is there a way to add in limit switches on each direction of rotation? For example you press "A" and the motor runs CW until a limit switch is hit the system shuts off ("A" and CW is dead) then only "B" can be pressed which runs the motor CWW until a limit switch is pressed killing that direction and thus pressing "A" starts the cycle over again. Basically opening and closing a door on a gear track.
JB H. Hi, fortunately, yes. You may see the connection here: goo.gl/1rFOQs
ahoj, můžeš mi prosím říct, kde dostanu YKQDC12-02RF koupit ? Děkuji Pavel
Complimenti veramente bravo ma se dovrei i mettere 2 finecorsa microswitch alla scheda per il motorino come faccio? ho provato in tanti modi, ma se avrei uno schema forse ce la potrei fare grazie
Very good
Car lock unlock me use kar sakte hein 🤔
Hi, nice video. If you were to add a limit/cut-off switch(s) when using forward/reverse option, to which wires do you add it?. Thanks in advance.
racerazz78 Hi, you may see the connection here: goo.gl/1rFOQs
Nudge Me Thanks
racerazz78 You are welcome!
Hi everyone,
I would like to be able to receive the signal from a controller with an HCS301 (MICROCHIP KeeLoq) in the transmitter and with a PICxxx or an ATMELxxx in the receiver.
There is a library for ARDUINO about receiving
Can it be uses to a 12 volt car wiper motor also..?
Yes..
Where can I buy this exact board?
From where i can buy this motor arrangenents and this full set of remote control...??? What the minimun operating distance of this remote??
Hi, this is the regular car power window motor and for the remote control you may find it on AliExpress. It can operate up to 100ft in the open air
m.aliexpress.com/item/4000921968294.html?pid=808_0000_0109&spm=a2g0n.search-amp.list.4000921968294&aff_trace_key=9d78d38166424cac8eb5e8a4f58cbf82-1587203805377-09426-UneMJZVf&aff_platform=msite&m_page_id=5549amp-XoaRdq3TSb7lfULhJufQUg1587203833835&browser_id=a4276fcaf9654f38945ebc5fa97ec0f1&is_c=N
Mau tanya dong bang..
Ini buat pake dinamo motor listrik bisa ga?
Hi thanks for this video it's very helpful can you please explain to me how to connect 2 limit switches because I want to use this to power a wiper motor to move a sliding gate thank you
Hii frnd... i m doing ME diploma in malvan.. i m doing auto sliding gate... have u done it?? ... so plzzz help me
@@rohitparab6614 yeah I did it I connected it to 2 limit switches and I connected a reciver to open it remotely
@@suzukisamurai9362 can u give me circuit diagram.. and what are components u used... plzzz sir.. i need ur help
9423925956 my wp no.
Kalo d kasih speed control bisa ngga gan
Where can i get this module..?