Wow this looks wonderful, honestly - and the AT-ST was always such a stand-out vehicle to be missing from your collection, so it's lovely to see Next up I'm really hoping for a Hailfire Droid, Resistance Bomber, or Kom'rk Mandalorian Starfighter
Excellent model, one of my favorite Star Wars vehicles. I'd love to see this design modified for the First Order AT-ST, I especially like that design with the added armor, modified viewport and darker color scheme.
06:21 According to the Star Wars Complete cross sections, the AT-ST has holo projectors in the cock pit to show the surrounding area that can't be seen from the physical view ports.
My favorite part is how you guys didn't forget the extra part of the leg that is what actually connects it to the "body" if you will, leggo always either forgets it or makes a cheater peice to make it look like its there, and I'm glad to finally see it done right in lego
What excites me most about this is the amount of leg pose-ability. The fact that the legs are accurate with the first thigh joint that connects in the proper place. It would be soo cool to create a stop-motion walking animation of this.
The most realistic tie pilots would be the newer ones. The ones that fit in the Brick vault mocs are the older ones, because of the short headspace in the cockpits.
I just got finished building it today but to get it in a balanced posing position took forever with pieces flying off constantly, very frustrating. It's def. not as easy as shown in this video. Also some pieces used are quiet rare and expensive can easily have been replaced with cheaper alternatives as they only serve a cosmetic purpose. It's looks nice tho, I'll give it that.
Just finished building mine earlier today and it doesn’t want to stay standing, the knee? Joint (top rear joint) keeps collapsing under the weight of the body. Used the joint pieces from the mando version
@@BrickVault Is it possible that you might soon be able to build your own cool custom versions of spider droids and droidekas and speeders etc. would surely also be great😅😀
Just looking at the handling I can see it's barely holding itself up. If you pose it too much and the parts wear out, friction alone won't be able to hold this model up. I bet if you just leave it on your desk long enough it'll collapse from gravity alone. Looks great though...
I fixed it with a mod, but yea. There's just no way I know to make it fully posable without the ankle part bending and having the whole thing crashing down
You guys have to do an AT-XT, that clone Walker needs more attention. It is one of the first Star Wars vehicles I recognised ever and loved along side the TX-130. If that’s walker comes then I can sleep easy at night
I built the tie defender.. wanted the tie fighter did that one. Just caved and got the rest of the bricks for the at-te. I have been waiting for you to make an atst! Wow!!! I think I will double the part list. I want two! Haha
I really like this lego and i would love to have it, but since the only thing u can buy are the instructions.... i mean how do i can get the actual phisical piecies?
Probably not without a support stand. There are pictures on google showing it in a walking pose with 2 stands, 1 for the foot and 1 for the underside body.
I would love to see you make some of the Naboo ships (Queens Royal Starship, Naboo Cruiser, Naboo Star Skiff) as well as vehicles from the Clone Wars like the Clone Turbo Tank, AT-OT, AT-AP, AV 7 cannon, Droid Gunship and Hailfire Droid!
Really good rendition. Brilliant connection joints for the legs. Head looks great plated/cleans up the look a lot. Still really like the Rogue one variant, as it's pretty much an OT version. No interest in the Mandalorian version.
This is probably the first Custom chicken walker I've seen that actually looks like a chicken walker. The official lego sets don't come close at all. Might just pick this up
I suspect that glue or other trickery was used in the model on the video, based on all the comments I've read and reviews I've watched from experienced builders unable to make this moc stand at all.
We try and make sure our instructions price points are around 5-10% of the total part cost. So if you're planning to buy the parts, the instruction cost should be a minor compared to the parts. Sadly, custom building is expensive and it probably always will be. We do what we can to find a price point that makes the many hours that go into instruction making worth it for us, our designers and the consumer.
i hope they make a AT-DT in the mear future, it would be cool, tbh idk if there is enough pictures of the walker to know exactly how to make the details
@@Kit_splat I wasn’t talking about the AT-ST, I was just saying that now that they did the AT-ST, it would be cool if they did the AT-XT at some point, even if it’s a vehicle that’s not seen much in Star Wars.
I'm not sure wether it's because of some used parts, but I'm having a hard time making the model stand as it should. Usually the head tends to "nod" down a lot due to its weight, I guess. But overall the looks are fantastic. And yes, just for display!
@@cesarlopez9995 thanks for the answer. After watching the video a couple of times, I was able to get it into the right position! But still not so much for play, just for display, but hey, it's okay 😂
I've just finished mine. This is the most detailed AT-ST we will ever seen, but it's too fragile. Literally even if I leave it there without touching it I'm scared it will collapse anyway. Btw its cool, but it's a nightmare.
Could you do a tie prototype mark 1? I know they look kinda goofy but I like their design and I think it would look cool in the same building style as the other ties!
As much as I love this design, it's not gonna be one that stands the test of time; especially with the ball and socket connection. Speaking from experience since I collect Bionicles and Kardas Dragon's neck has seen better days...
Mmm, I kinda like GolPlaysWithLego's AT-ST better. I prefer the weapons on this one and it looks like you havent used quite so many rare parts, but other than that I think the shaping on Gol's is overall better
Magmafrost13 oh do you have his older version? Honestly I like brick vaults better than gols older model. His new one is really good though in terms of looks
@@CatalystBricks I have version 2.5, and that's the version Im looking at when I say it looks better. I can see how version 3's legs might be a bit weaker, but according to a comment Gol made on a photo of v3, it does stand on its own, it just tips over easily (which honestly is true of v2.5 as well)
Magmafrost13 that’s interesting because one of my friends got v3 and is super frustrated with it because he can’t make it stand on it’s own. I wonder if the joints he’s using are too worn out idk
For those of you who were asking for the Mandalorian version here it is ua-cam.com/video/8-OxXAIaPXg/v-deo.html
Ironically that at-st MOC is probably more durable than the ones in the movie
It's ironic.
its not. i've built it and it can't even get close to standing on its own
@@jackwalker4957 I stood mine up using clear 1 x 2 bricks
Are u sure about that?!
It is incredibly fragile and falls apart if you look at it the wrong way.
I’m in awe of how accurate this model is, especially compared to the LEGO versions.
Looks more accurate than the videogame versions themselves.
no, it's not. Legs are way too short
@BR-P-2001 // which one
@BR-P-2001 // what previous comment?
I've always felt like Lego never got the head design pf the AT-ST down, but this model is PERFECT! Nice Job!
Could we see a minifig scale hyena bomber from the clone wars
You can find one if you search "lego hyena bomber MOC" on Google.
You will find an absolutely amazing one!
Jared Aldridge dang, now I also want to see that
Yesssssssssss aghhhhhh
1:08 That little dance the AT-ST did was something I didn't know I need.
Ever play Star Wars Battlefront? They do the same thing when nobody is using them lmao
Wow this looks wonderful, honestly - and the AT-ST was always such a stand-out vehicle to be missing from your collection, so it's lovely to see
Next up I'm really hoping for a Hailfire Droid, Resistance Bomber, or Kom'rk Mandalorian Starfighter
Excellent model, one of my favorite Star Wars vehicles. I'd love to see this design modified for the First Order AT-ST, I especially like that design with the added armor, modified viewport and darker color scheme.
06:21 According to the Star Wars Complete cross sections, the AT-ST has holo projectors in the cock pit to show the surrounding area that can't be seen from the physical view ports.
My favorite part is how you guys didn't forget the extra part of the leg that is what actually connects it to the "body" if you will, leggo always either forgets it or makes a cheater peice to make it look like its there, and I'm glad to finally see it done right in lego
I CLAPPED, I CLAPPED FOR RICH EVANS BECAUSE I KNOW WHO HE IS
I consoomed reference, and am excited for next reference.
Things I know! I recognised him and I claaaapped!
BRICKVAULT BROKE NEW GROUD
Very cool.
I stood up from my chair and cheered!
What excites me most about this is the amount of leg pose-ability. The fact that the legs are accurate with the first thigh joint that connects in the proper place.
It would be soo cool to create a stop-motion walking animation of this.
Dude this moc the head shape is more accurate than any version lego ever produced lol
Props to you
Nice moc. Would love to see clone wars y-wing
Sure
You should make the Mandalorian version and add it to this download. It’s mostly color swaps right and maybe some extra wiring?
I was thinking of doing that myself while using the set as reference and putting in a red light brick for the eyes of the Mando walker.
I was about to write this comment
This thing is amazing I hope next they make something like the royal guard interceptor
Cant you just swap out the parts on the normal tie interceptor?
@@ratbat1072 Not in total, it has some variations.
@@lightsaberproductions8592
Oh ok
Ratbat 1986 I’m pretty sure the only difference (other than color) is 4 additional tiny fins
I can’t tell you how long I’ve been waiting for this moc!!! I just finished my brickvault Y-wing moc.
Do some more clone wars stuff! Like a droid gunship, at-ot or even a at-ap.
AT-AP might be on the way ;)
@@tubabrot4680sounds awsome!! I want to buy all the clone wars era instructions but I have pace myself. soo please dont tempt me.
@@KGBzelov at-ap is alredy finished, they are just doing finishing touches, check the at-te creator Instagram.
Could you do an AT-DP? And also what is the best/realistic Lego tie pilot?
The most realistic tie pilots would be the newer ones.
The ones that fit in the Brick vault mocs are the older ones, because of the short headspace in the cockpits.
Also, second the AT-DP
It amazes me how accurate these designs are
I just got finished building it today but to get it in a balanced posing position took forever with pieces flying off constantly, very frustrating. It's def. not as easy as shown in this video. Also some pieces used are quiet rare and expensive can easily have been replaced with cheaper alternatives as they only serve a cosmetic purpose. It's looks nice tho, I'll give it that.
Just finished building it this weekend and 100 percent this.
@@00Slyder00 I’m thinking about buying this, do you recommend it?
@@birdchips6886 I 100% do not recommend this set to anyone
@@00Slyder00 have you bought any other Star Wars sets from brick vault?
@@birdchips6886 Yes, I've bought the X-Wing. It was a challenging build, but still one hundred times better than the AT-ST.
wow, i love how spindily it is. so real. how long untill a pack of BARCs/74-z, combat speeders, droidekas, and treadspeeders in minifig scale?
This! A speeder pack would be great
One of brickvault supported creators made some speeders, thomas Jenkins, check his Instagram.
Check Flikr.
There are some nice droideka and speeder design's on there
Just finished building mine earlier today and it doesn’t want to stay standing, the knee? Joint (top rear joint) keeps collapsing under the weight of the body. Used the joint pieces from the mando version
How much did it cost in pieces ?
@@oswald9723Hundreds (in AUD), same thing happened to me as well
is there also an instruction for a walker without a head but 10$ more expensive?
Oh yeah can't wait for that!
@@inthert8118 OMG! You here? You´re one of the very best LEGO builders of all time!
I Love your Custom builds sooooooo mich, pls make an custom Droid Gunship🙊
I'm hyped for your future builds
funny that you ask for this specific model... You may not have to wait long.
@@BrickVault ok haha, what an lucky coincidence I would say🙊😉😂
@@BrickVault Is it possible that you might soon be able to build your own cool custom versions of spider droids and droidekas and speeders etc. would surely also be great😅😀
BrickVault I knew it, so that’s what was blurred in your May 4th video huh 🤨
Just looking at the handling I can see it's barely holding itself up. If you pose it too much and the parts wear out, friction alone won't be able to hold this model up. I bet if you just leave it on your desk long enough it'll collapse from gravity alone. Looks great though...
I fixed it with a mod, but yea. There's just no way I know to make it fully posable without the ankle part bending and having the whole thing crashing down
It stands fine as long as it's on a flat surface
Amazing build, I tried to make one as a kid but never completed mine. One day I might be able to build this moc, until then two thumbs up!!
Love these vids and have since I was a kid
You guys have to do an AT-XT, that clone Walker needs more attention. It is one of the first Star Wars vehicles I recognised ever and loved along side the TX-130. If that’s walker comes then I can sleep easy at night
I built the tie defender.. wanted the tie fighter did that one. Just caved and got the rest of the bricks for the at-te. I have been waiting for you to make an atst! Wow!!! I think I will double the part list. I want two! Haha
Nice MOC! But I still also like lego set AT-ST :D
Best AT-ST I've seen so far!
I saw the noti I was hyped immediately! Kinda need to buy all these minifigure scale build and buy a shelf and put them all on it
Love the techniques and details. But in my view, it appears the head is too short on the profile view when compared to that ESB clip.
The AT-STs in ESB are a different model than the ones in ROTJ
yes, but still the rotj heads are actually longer than the moc's and the front plate is at a slightly steeper angle than on this version.
It would be awesome to see an AT-AP from you guys!
This is a suggestion what you can build. Imperial landing craft.
I really like this lego and i would love to have it, but since the only thing u can buy are the instructions.... i mean how do i can get the actual phisical piecies?
Bricklink
I love it.
And a mandalorian fighter next please.
Razor Crest?
TIE-fighter?
The Kom’rk Class Fighter/Gauntlet Starfighter right?
Your brother is extremely good at making these amazingly accurate Mocs, he needs to build something and put it on LEGO Ideas💡
Is there a way to put it on one leg???? It would be super cool to get a walking motion with this model!!!
Probably not without a support stand. There are pictures on google showing it in a walking pose with 2 stands, 1 for the foot and 1 for the underside body.
I have watched this video 7 times making my own atst moc this was a lot of the inspiration it’s amazing far more stable than my own
My phone almost dropped out of my hand when I saw that when I saw that amazing thing on the thumbnail
I would love to see you make some of the Naboo ships (Queens Royal Starship, Naboo Cruiser, Naboo Star Skiff) as well as vehicles from the Clone Wars like the Clone Turbo Tank, AT-OT, AT-AP, AV 7 cannon, Droid Gunship and Hailfire Droid!
either the middle part of the legs is too short or the top part of the legs is too big, or both
the rest looks amazing
We need a clone wars y wing
Now this is the LEGO AT-ST I was waiting for!
Really good rendition. Brilliant connection joints for the legs. Head looks great plated/cleans up the look a lot. Still really like the Rogue one variant, as it's pretty much an OT version. No interest in the Mandalorian version.
YYYYYEEEEESSSSS
Custom lego AT- ST, Thank you
This is probably the first Custom chicken walker I've seen that actually looks like a chicken walker. The official lego sets don't come close at all. Might just pick this up
I suspect that glue or other trickery was used in the model on the video, based on all the comments I've read and reviews I've watched from experienced builders unable to make this moc stand at all.
Yep, it can’t stand. Hundreds of dollars for nothing
Veteran AT-ST possibly soon? It's from Star Wars Commander and considered canon :D
Perfect build👌
I love your moc’s but there just too expensive. If I had enough money I would buy a tie bomber and a tie interceptor.
I aggre but I'm still gonna buy it 😂
Agreed
Yeah, for just the instructions (not even any parts) it’s $17
We try and make sure our instructions price points are around 5-10% of the total part cost. So if you're planning to buy the parts, the instruction cost should be a minor compared to the parts. Sadly, custom building is expensive and it probably always will be. We do what we can to find a price point that makes the many hours that go into instruction making worth it for us, our designers and the consumer.
BrickVault I still might buy parts for one or two of you’re builds. They look amazing
Man, I wanna build a couple of these so I can mod it into the AT-CT and AT-KT from Force Unleashed.
I would love to see a k-wing and tie/droid fighter. Recently got the tie defender and e-wing. I will defiantly have to get more.
Honestly would love to see an episode 5 atst I know the differences are small but I think the proportions are so much more pleasing
You happy now?
what is the name of the song at the beggining.
FINNALY!!!
This is Art, there is no other word for it.
i hope they make a AT-DT in the mear future, it would be cool, tbh idk if there is enough pictures of the walker to know exactly how to make the details
Pleeaaaaaase build the A-T A-P next😂🙈
Wow- this is very impressive. You have to get to the AT-XT now at some point. I know it's not the most well known vehicle, but it's a classic to me
At st not at xt
@@Kit_splat I wasn’t talking about the AT-ST, I was just saying that now that they did the AT-ST, it would be cool if they did the AT-XT at some point, even if it’s a vehicle that’s not seen much in Star Wars.
Damn that’s pretty nice. Will prob buy this at some point in the future
Who else thinks BV should do an AT-DP like this.
Me
I'm not sure wether it's because of some used parts, but I'm having a hard time making the model stand as it should. Usually the head tends to "nod" down a lot due to its weight, I guess.
But overall the looks are fantastic. And yes, just for display!
I made it but it won't stand the head is way too heavy
@@benjaminpriest4243 Strange.. in the video it seems so sturdy
I built it and you just have to adjust it by the feet on a flat surface and it should stand after a while
@@cesarlopez9995 thanks for the answer. After watching the video a couple of times, I was able to get it into the right position! But still not so much for play, just for display, but hey, it's okay 😂
What I did is take the leg articulation design from the MOC and I added those to the official rogue one Lego set. Tbh it's way better now
I've just finished mine. This is the most detailed AT-ST we will ever seen, but it's too fragile. Literally even if I leave it there without touching it I'm scared it will collapse anyway. Btw its cool, but it's a nightmare.
Looks way better than the USC released by Lego.
Could you do a tie prototype mark 1? I know they look kinda goofy but I like their design and I think it would look cool in the same building style as the other ties!
All this time after this MOC was released and I'm still amazed that it has more stability than the Black Series walker toy.
Can you give me the instructions ? Pls 🙏
@@benjaminalagic8380 Well, it's not my build so I don't have any to give.
It doesnt have stability, they probably used glue. Literally everyone that got this is unable to make it stand including me
I love the at-st
I’ve seen enough. I’m satisfied
You should get the updated V-19 Torrent Fighter from Thomas Jenkins in the store!
Iv been waiting so long for you guys to upload this, thanks!
As much as I love this design, it's not gonna be one that stands the test of time; especially with the ball and socket connection. Speaking from experience since I collect Bionicles and Kardas Dragon's neck has seen better days...
This is by far the best LEGO ATST our there, great work!
I love AT ST 💙💙💛🧡🧡
That is awesome, well....like every Time you build something
Looks amazing keep up the great work
I would love to see the Stinger Mantis from Jedi Fallen Order or a Tie Reaper from Rogue One
I hope you have a May the 4th discount code again.
Mmm, I kinda like GolPlaysWithLego's AT-ST better. I prefer the weapons on this one and it looks like you havent used quite so many rare parts, but other than that I think the shaping on Gol's is overall better
Magmafrost13 I agree but gols also can't stand up with out support
@@CatalystBricks I have one standing right next to me that disagrees
Magmafrost13 oh do you have his older version? Honestly I like brick vaults better than gols older model. His new one is really good though in terms of looks
@@CatalystBricks I have version 2.5, and that's the version Im looking at when I say it looks better. I can see how version 3's legs might be a bit weaker, but according to a comment Gol made on a photo of v3, it does stand on its own, it just tips over easily (which honestly is true of v2.5 as well)
Magmafrost13 that’s interesting because one of my friends got v3 and is super frustrated with it because he can’t make it stand on it’s own. I wonder if the joints he’s using are too worn out idk
Lego needs this
This at st design is awesome but are you going to make a mandalorian colour scheme ?😄👍
Wow just wow....
It would have benefited from a 1x2 flat plate on those feet slopes.
It should fit three people with leg room and that's the down fall every time.
so your saying this would cost $170 or so to build, but the offical one from the Mandalorian that's about the same size costs about $40
Guardians Benatar next please! Or a minifig scale quad jumper!
What about a minifig-scaleTIE Reaper? I think could be quite a challenge because of the dimenssions but could turn out to be amazing
This is awesome! What a great job!
They should do the ATST that appears in the mandalorian and the other version of the first order (in which primarily appears in battlefront2)
Yay he called it a chicken walker I love that nic name
Great built!!! Is this model compatible with Star War Legion game at 1:48 scale? Cheers
I want a turbo tank design by you guys
Please do the AT AP
That looks awesome.
Do the Hoth version when the set comes out
I have the UCS version of this and it falls over if you blow on it
I built this one and it doesn't even stand up
@@Not-ElBarto then you probably built it wrong
Amazing! Just perfect.