@@joaoantunes1664 The egg appears after you kill her, so either you cut the egg from the cadaver OR Like the Phoenix she turns into an egg at death to be reborn.
Coool! I must try the clay again... last time i managed to switch farhenheit and Celsius... so i made toxic smoke when i scorched it on 300 Celsius....
It's so awesome that you have all these skills and talents, so you can just be like "this would be a cool thing to have" and then ACTUALLY MAKE IT and do it AMAZINGLY
Hi Martina, great make as usual ! To solve your non-sticking problem, you should get some liquid clay, such as liquid fimo or sculpey bake and bond. You can apply a super thin layer with a brush on any surface and the clay will stick to it. It's perfect for mixed media projects or to make sure raw clay will adhere to baked pieces, liked your teeth and spikes !
Your Ender Dragons looks Incredible, I can't even if you did a water dragon,fire dragon, light dragon, dark dragon, or a (skeletal) lich dragon which ever. In case a blackout you can use your new dragon friend to help you, Wonder what other project you have in stored, keep up the great work NerdForge. :)
"I don't really work with polymer clay..." "Oh look, I'm amazing!!!" You are one multitalented girl. Btw, you can use screen too if your stores have it.
i love the idea as well as the result, but for next time i would try to put the lower jaw just a little more up as well as forward, bc at the moment it looks like her jaw dropped xD (also its a little short ;D). ps: i love your videos, i started to rebuild and also change some of your ideas (so it looks better in my eyes). I love dragons and minecraft i also like to draw and i have multiple pictures of dragons :D
Just a tip on cooking the polymer clay, if you’re using your food oven, get some ‘roast chicken’ oven cooking bags from the supermarket and wrap your project in that (and close it up) so that any fumes don’t linger in there and mix with your food cooking. :) Another great video! Thank you Martina. :)
Actually I wouldn't do that... As long as the baking temperature doesn't go over 120°C there is no reason for the clay to produce any fumes. On the opposite, the bag might act as a kind of greenhouse and trap more heat inside, which my result in the clay not keeping the right shape or even burning, which will then produce harmful fumes that would escape all at once in your face once you open the bag, because you wouldn't know your clay is burning because the smell of the fumes is also trapped in the bag... Sorry, but please don't do that ! Just monitor the oven temperature with an oven thermometer if you really want to be safe, and let the over air out with the door open for at least one hour before baking any food, you'll be fine... You can even leave the oven fan on with no heat if you want to speed up the process.
Illona Vijverberg Thank you for your thoughts. I have used the oven bag many times and never burnt nor misshapen my projects - I make miniature busts - and it hasn’t raised the temperature inside the bag that I’m aware of, but then I work with very low temps as different types and thicknesses of polymer cooks at different times/temps and I use a layering technique. It has however made me quite sure that the polymer clay does release fumes at low temperatures as I can smell it when opening the bag (outdoors) and see the ‘foggy’ discolouration on the inside surface of the bag, consequently I wouldn’t want those particles sticking to the inside of my food oven surfaces. Of course everyone should do what is best for them, so if your system works for you I encourage you to continue with what you are doing, however I just wanted to share my experiences and make people aware that fumes (and fumes are particle based) are released during the process. :)
Hey! I'm new to this channel, and I just want to say I absolutely LOVE you guys. You're awesome! Everything you do is so, so cool. You're really talented, and all you've done is pure art. Keep on surprising us!!!
That was awesome, really well done. If doing another one an LED in the mouth to give the affect of fire about to come out, maybe from one of those flickering tea lights. On a separate switch maybe.
i love how, with every one of your projects, you used mixed mediums : clay, electronics, paint, epoxy, paper, wood AND I COULD GO ON. It shows ur level of skill and talent and is what sets your videos apart. You couldve so easily just made a clay dragon, but you go the extra mile to integrate electronics! Ur insaaane girl
What about the Necronomicon or the Gravity Falls journals?? I've seen many of your videos, i know you would make them awesome and i would love to see either of these two!!
martina at the beginning of the video: i don’t have any experience with clay so... also martina at 12:35, proudly looking at her project made out of material she said she had no experience with: I LOVE IT
everytime I work with chicken wire or any type of wire for fencing, I end up getting scratches from it all the time. I worked on a ranch for awhile here in Texas in the U.S. We fixed fences quite a few times. Only one thing I hate more then that, concrete which we sometimes had to work with to when building them
BOOK with polymer clay covers with moving eye looking left to right then looking left again and so on... Moving stuff, glowing stuff... KEEP IT COMING!
The lower jaw seems to be a little short compared to the upper jaw giving a slight look of an overbite, however that doesn't take away from the fact that this looks absolutely epic! Especially for your first time trying this medium, this is absolutely amazing! I'm so glad that the LED eyes worked, and I'm pleasantly surprised to know they went through like 10 bakes in an oven and still worked, over all, 10/10 pog dragon :)
would love to see you do a more traditional dragon someday with thinner wings loved this one but with your talent don't think you would have too much trouble.
Another awesome video guys the dragon is so cool it always throws me when i see you using a notepad as a pallet? Is it something you just do out of convenience or is there a reason behind it?
You can also use a "bake and bond" to help with attachments. Dragon-wise it is really awesome, though Minecraft seemed to have missed the fact that the wing membrane needs to attach to more of the body and not just sit on the wing or attach to very little of the body. (Game rules and such I guess). This is not to say your dragon is wrong though, just a comment on dragon anatomy that was once pointed put to me
If you're having trouble getting the clay to stick to other materials (like the underside of the wing) you can buy liquid clay, which you put on the pieces and it acts like a glue for the clay, as clay sticks to itself really well. I feel like i said the word "clay" alot in that sentence so hopefully it makes sense 😭
Oh wow! This turned out absolutely amazing! The finished piece looks fantastic! If I knew anything about polymer clay, I would totally attempt this myself. Keep up the good work Martina! I always look forward to what you're going to make next ❤
With so high natural resistance to fire (oven) this dragon has, he/she should be painted red. :) Now seriously, you are truly amazing. I would be too intimated by the scale of the build to attempt it, but you did great considering your limited experience with clay.
Great dragon. Can I ask what gauge wire you used for the main body. Have you tried air drying clay?. Hearty a d clay is super lightweight and ideal for wings ( just roll it out and lay over wire frame , no need for the chicken wire as the clay is so light.
You should get your hands on some wires with silicone insulation. Then you won't have to worry about them melting and shorting to something when they are heated. Also putting series current limiting resistor to the LEDs is a good practice. It is not necessary with coincell-type ones (they have high internal resistance), but with baterries like AA it is usually worth to consider. (eventhough UVs have high enough forward voltage to withstand this without, it is a good practise). Nice project.
It's so cool!!! I love that you used rocks for a natural texture and put them on the base. Whenever I sit down to work with clay, I have no idea what to make. 🙈🙈🙈🙈 You are so talented, thank you for always creating amazing art. 💜💜💜💜💜💜💜
I would have left the claws the same color as teeth and made the spikes purple but it’s not my channel nor do I have the skill so I just appreciate your videos
Woudn't it be epic if you did The book from H.P. Lovecraft called "The Necronomicon" in lovecraft mythology this book conceals many dark magic formulas and impies creatures from the dawn of time and unexplored dimensions.
He looks so good!!! I'm kinda new to your channel, so if you have done this already, I apologize! But if you don't want to risk a creation in the oven (or at least electronics), I highly recommend looking up epoxy clay! it air hardens (technically chemical hardens, due to the reaction) but it is similar to both water and polymer clays in how easy it is to work with. Like a weird combination of both! Just be careful of its residue!
The big difference I see between epoxy and polymer clays is that you have a limited time to work with epoxy, whereas polymer clay you can cover your work so that it won't collect dust, and come back to it later and it won't have budged. And also the price 😬
What a fabulous dragon. It looks so real. You are truly creative and I love watching how you go from plans to the finished article. Wonderful. Thankyou.
This is SO AWESOME!! Honestly you guys deserve wayyyy more subs for making super awesome videos EVERY TIME YOU POST!! I love your channel 💕 11:08 is that a PewDiePie reference!? 😂
Me: I'm officially out of my minecraft phase This video: exists Me: *starts server* well hello Jean, we meet once again. Maybe some Terraria bosses would be cool as well to sculpt!
This video is so inspiring! I used to play with polymer clay as a kid, and I have recently learned to solder for a class I took at a local stained glass making shop. Now I'm imagining somehow combining these two art forms; a dragon with stained glass butterfly wings? 🐉 🦋
That is amazing and I now am curious if you would sell these (not the originals but making it again)? Really love dragons and this looks amazing. Ps: the enderdragon is a girl as she has a egg and is based on the west European dragons.
Hi! LOVE It! I was wondering what about burning the polymer with the cables and the LED light ... It seems to work without burning It haha at which temperature did you put the oven? Thanks!
I thought so too ! And with the UV led eyes, she could make the wall things where you learn new screams (haven't played in a long time, and only in French...) and have the funds written in a special ink that only shows under UV light 🤩
3:20 It's a she c:
Notch said that her name is Jean, what was later confirmed by Dinnerbone.
and she also lays an egg
@@joaoantunes1664 The egg appears after you kill her, so either you cut the egg from the cadaver OR Like the Phoenix she turns into an egg at death to be reborn.
@@RequiemPoete 🤔🤔
@@RequiemPoete
That would be awesome!
Jean? Thats a man only name in french lol
Me: why my back hurt?
My sitting pose: Ender dragon
When she held up her display of spikes, I felt like I was looking at dinosaur bones
Ye dinosaur-mouse bones :o
Instead of saying let’s texturise you should have said let’s rock
And?
No guys he meant lets rock and roll
Bahahhahahaha
... y'all omg, how did you not get this joke xD
Yess
The dry brushing really brought everything together.
From the sculpting and painting stuff I’ve watched on here, dry brushing is the “make good” stage of painting.
Dry brush is magic!
Definitely, it always brings out all the details to a key :)
..I have also ruined the likes, it is no longer the magic number >:3
I agree
I was so prepared to see the whole process! It looks so cool! It makes me wish I had your art skill and patience!! ❤ pretty awesome!
Thank you so much 😀
I like your face paint lol
The dragon’s name is Jean and she is a beautiful but dangerous creature!!
Nah,she isnt that dangerous,i have died so much more times from creepers.
Unfortunately for Jean, she’s not as dangerous as intentional game design.
Coool! I must try the clay again... last time i managed to switch farhenheit and Celsius... so i made toxic smoke when i scorched it on 300 Celsius....
Ingebjørg Maage-Undrum f
What did you use to heat it up to 300 ° Celsius?? 😅
Max on my oven lol
Your oven gets to 570° F?
@@mystic_tacos 527 is my max
It already looked so cool at the skeleton stage, you always hook me so fast in your videos :)
Polymer Clay Aouh!
Next up is the Wither I guess? ( Please )
Also how dare you not knowing that the Ender Dragon is female!!
Wait, really?
@@majesticwyrm yeah, it is! :D
@@majesticwyrm I mean, she has an egg, lol
SHE SAID “OR SHE I GUESS” IDIOT!
@@monacruz4072 Chill dude, it's a joke
Awww this makes me wish dragons were real so I could have one as a pet 😭 You have amazing skill!
Komodo Dragons wish to know your location.
@@RequiemPoete Nevermind I retract my statement 🤣
I want a Toothless
Nah dragons are rather filthy creatures. Watch the fourth epidode of season four of Rick and Morty called Claw and hoarder :p
Hagrid is That you?
It's so awesome that you have all these skills and talents, so you can just be like "this would be a cool thing to have" and then ACTUALLY MAKE IT and do it AMAZINGLY
Hi Martina, great make as usual ! To solve your non-sticking problem, you should get some liquid clay, such as liquid fimo or sculpey bake and bond. You can apply a super thin layer with a brush on any surface and the clay will stick to it. It's perfect for mixed media projects or to make sure raw clay will adhere to baked pieces, liked your teeth and spikes !
Your Ender Dragons looks Incredible, I can't even if you did a water dragon,fire dragon, light dragon, dark dragon, or a (skeletal) lich dragon which ever.
In case a blackout you can use your new dragon friend to help you, Wonder what other project you have in stored, keep up the great work NerdForge. :)
Her name is martina
It's the dragon from Minecraft wich doesn't have a theme. It's just kinda black :) The place it lives in looks kinda rad too
"I don't really work with polymer clay..." "Oh look, I'm amazing!!!" You are one multitalented girl. Btw, you can use screen too if your stores have it.
The dragon's face looked so damn derpy before the clay:D
Turned out amazing though!
i love the idea as well as the result, but for next time i would try to put the lower jaw just a little more up as well as forward, bc at the moment it looks like her jaw dropped xD (also its a little short ;D).
ps: i love your videos, i started to rebuild and also change some of your ideas (so it looks better in my eyes). I love dragons and minecraft i also like to draw and i have multiple pictures of dragons :D
I was to make a 'bad dragon' joke when the base first came out of the oven.. ;)
But honestly, the finished project looks amazing!
i did the bad dragon joke for you mate
Just a tip on cooking the polymer clay, if you’re using your food oven, get some ‘roast chicken’ oven cooking bags from the supermarket and wrap your project in that (and close it up) so that any fumes don’t linger in there and mix with your food cooking. :) Another great video! Thank you Martina. :)
Actually I wouldn't do that... As long as the baking temperature doesn't go over 120°C there is no reason for the clay to produce any fumes. On the opposite, the bag might act as a kind of greenhouse and trap more heat inside, which my result in the clay not keeping the right shape or even burning, which will then produce harmful fumes that would escape all at once in your face once you open the bag, because you wouldn't know your clay is burning because the smell of the fumes is also trapped in the bag... Sorry, but please don't do that ! Just monitor the oven temperature with an oven thermometer if you really want to be safe, and let the over air out with the door open for at least one hour before baking any food, you'll be fine... You can even leave the oven fan on with no heat if you want to speed up the process.
Illona Vijverberg Thank you for your thoughts. I have used the oven bag many times and never burnt nor misshapen my projects - I make miniature busts - and it hasn’t raised the temperature inside the bag that I’m aware of, but then I work with very low temps as different types and thicknesses of polymer cooks at different times/temps and I use a layering technique. It has however made me quite sure that the polymer clay does release fumes at low temperatures as I can smell it when opening the bag (outdoors) and see the ‘foggy’ discolouration on the inside surface of the bag, consequently I wouldn’t want those particles sticking to the inside of my food oven surfaces. Of course everyone should do what is best for them, so if your system works for you I encourage you to continue with what you are doing, however I just wanted to share my experiences and make people aware that fumes (and fumes are particle based) are released during the process. :)
Being creative is the greatest talent of all
Hey! I'm new to this channel, and I just want to say I absolutely LOVE you guys. You're awesome! Everything you do is so, so cool. You're really talented, and all you've done is pure art. Keep on surprising us!!!
Hey, thank you so much!! comments like this really make our day
@@Nerdforge OMG YOU SAW MY COMMENT I'm so glad it made your day!!! =D you just made mine as well hahahaha :b
I fricking love it! That purple tint!
That was awesome, really well done. If doing another one an LED in the mouth to give the affect of fire about to come out, maybe from one of those flickering tea lights. On a separate switch maybe.
i love how, with every one of your projects, you used mixed mediums : clay, electronics, paint, epoxy, paper, wood AND I COULD GO ON. It shows ur level of skill and talent and is what sets your videos apart. You couldve so easily just made a clay dragon, but you go the extra mile to integrate electronics! Ur insaaane girl
it would be awesome if you make an end crystal to go with the dragon!
For a first time polymer sculpt, it turned out bloody fantastic. Great work! :D
Verrrry cool! 😃
What about the Necronomicon or the Gravity Falls journals??
I've seen many of your videos, i know you would make them awesome and i would love to see either of these two!!
Well I was going to work on physics but I have to watch what amazing thing Martina and hanzi made ❤️
You forgot to put an end crystal at the top of the obsidian tower! Still absolutly LOVE the final result tho😁
Fyi LEDS can hold up to 250°C for like a second, so 100°C is kinda safe, just don't breathe the fumes
martina at the beginning of the video: i don’t have any experience with clay so...
also martina at 12:35, proudly looking at her project made out of material she said she had no experience with: I LOVE IT
I love the terrified possessed chicken stage at 7:00 haha
everytime I work with chicken wire or any type of wire for fencing, I end up getting scratches from it all the time. I worked on a ranch for awhile here in Texas in the U.S. We fixed fences quite a few times. Only one thing I hate more then that, concrete which we sometimes had to work with to when building them
BOOK with polymer clay covers with moving eye looking left to right then looking left again and so on... Moving stuff, glowing stuff... KEEP IT COMING!
The lower jaw seems to be a little short compared to the upper jaw giving a slight look of an overbite, however that doesn't take away from the fact that this looks absolutely epic! Especially for your first time trying this medium, this is absolutely amazing! I'm so glad that the LED eyes worked, and I'm pleasantly surprised to know they went through like 10 bakes in an oven and still worked, over all, 10/10 pog dragon :)
she should get more views and subs for how talented she is
would love to see you do a more traditional dragon someday with thinner wings loved this one but with your talent don't think you would have too much trouble.
Another awesome video guys the dragon is so cool it always throws me when i see you using a notepad as a pallet? Is it something you just do out of convenience or is there a reason behind it?
Hahah thank you! It's just convenience and laziness, yes 😅 it's usually close for grabs and I don't use it for anything else so 🤷🏻♀️
You can also use a "bake and bond" to help with attachments.
Dragon-wise it is really awesome, though Minecraft seemed to have missed the fact that the wing membrane needs to attach to more of the body and not just sit on the wing or attach to very little of the body. (Game rules and such I guess). This is not to say your dragon is wrong though, just a comment on dragon anatomy that was once pointed put to me
a Phoenix with led in its body and wings would be amazing!!!!
If you're having trouble getting the clay to stick to other materials (like the underside of the wing) you can buy liquid clay, which you put on the pieces and it acts like a glue for the clay, as clay sticks to itself really well.
I feel like i said the word "clay" alot in that sentence so hopefully it makes sense 😭
Yeah, you should make the wither or a iron golem in real life.
We have an architects fan right there guys
Dragon!! And with glowing eyes! Yay!
There is this really cool stuff called Liquid Polymore Clay (Liquid Sculpey) that acts like a glue for your project, I use it to harden a connection!
Oh wow! This turned out absolutely amazing! The finished piece looks fantastic! If I knew anything about polymer clay, I would totally attempt this myself.
Keep up the good work Martina! I always look forward to what you're going to make next ❤
With so high natural resistance to fire (oven) this dragon has, he/she should be painted red. :)
Now seriously, you are truly amazing. I would be too intimated by the scale of the build to attempt it, but you did great considering your limited experience with clay.
nice, I'm gonna try this!
another trick with polymer clay, l'et's say you wanna ''save'' some progress, you can use a heat gun to have it semi-harden :)
Great dragon. Can I ask what gauge wire you used for the main body.
Have you tried air drying clay?. Hearty a d clay is super lightweight and ideal for wings ( just roll it out and lay over wire frame , no need for the chicken wire as the clay is so light.
You should get your hands on some wires with silicone insulation. Then you won't have to worry about them melting and shorting to something when they are heated. Also putting series current limiting resistor to the LEDs is a good practice. It is not necessary with coincell-type ones (they have high internal resistance), but with baterries like AA it is usually worth to consider. (eventhough UVs have high enough forward voltage to withstand this without, it is a good practise). Nice project.
It's so cool!!! I love that you used rocks for a natural texture and put them on the base. Whenever I sit down to work with clay, I have no idea what to make. 🙈🙈🙈🙈 You are so talented, thank you for always creating amazing art. 💜💜💜💜💜💜💜
Please please do more dragons! This dragon is amazing, you are so talented and I love following your videos!
That looks awesome😱😍. The dragon looks so cool! Great job Martina👍🏻👍🏻
Make your own room in a small version to put on your bookshelf
I would have left the claws the same color as teeth and made the spikes purple but it’s not my channel nor do I have the skill so I just appreciate your videos
IDEA: Make the monster book from Harry Potter and the prisoner of Azkaban.
It never fails! Every time I watch one of these videos my mind is blown! She is soooo talented!
This is hands down the coolest thing you have made thus far!! I love this!
Wow, thank you!
Nooooo....thank you!!
When you realize a technique works reliably and just “this opens up so many possibilities”
You can safely embed gemstones like quartz and amethyst in fimo ^.^ fun little fact I found out the other day.
Woudn't it be epic if you did The book from H.P. Lovecraft called "The Necronomicon" in lovecraft mythology this book conceals many dark magic formulas and impies creatures from the dawn of time and unexplored dimensions.
He looks so good!!! I'm kinda new to your channel, so if you have done this already, I apologize! But if you don't want to risk a creation in the oven (or at least electronics), I highly recommend looking up epoxy clay! it air hardens (technically chemical hardens, due to the reaction) but it is similar to both water and polymer clays in how easy it is to work with. Like a weird combination of both! Just be careful of its residue!
Thanks for the tip!
Dragon is actually female! Her name is Jean. 😌💕 but that tip is smart!
The big difference I see between epoxy and polymer clays is that you have a limited time to work with epoxy, whereas polymer clay you can cover your work so that it won't collect dust, and come back to it later and it won't have budged. And also the price 😬
What a fabulous dragon. It looks so real. You are truly creative and I love watching how you go from plans to the finished article.
Wonderful. Thankyou.
Polymer clay is literally the best. If you form a polymer clay cult, I swear to god I'll join.
Hello! I’m a new subscriber! This is the first video of your I’ve seen and I already love the way you act and edit your videos!
This is SO AWESOME!! Honestly you guys deserve wayyyy more subs for making super awesome videos EVERY TIME YOU POST!! I love your channel 💕
11:08 is that a PewDiePie reference!? 😂
can you please do a levitation magnet plate diy!!
Imagine being that talented-
Make a netherite sword or enchanted golden apple
i think you should do a combo between gaming and crafts
you'll prob get more views and subs
That is sooooo cool!
Me: I'm officially out of my minecraft phase
This video: exists
Me: *starts server* well hello Jean, we meet once again.
Maybe some Terraria bosses would be cool as well to sculpt!
I wanna see her whole shelf :)
Haven’t even seen the finished product, but I already know I’m gonna love it!
Edit: I love it!
11:20 MATT SHAE'S
Absolutely fricking awesome!!!
13:26 for the final shots
It is so very realistic
I hope that you will make a nether portal soon if you are interested.thanks for making this video
This video is so inspiring! I used to play with polymer clay as a kid, and I have recently learned to solder for a class I took at a local stained glass making shop. Now I'm imagining somehow combining these two art forms; a dragon with stained glass butterfly wings? 🐉 🦋
You inspire me so much❤️
It's really amazing!!! I love all your projects, soo nicely
This is so sweet!
Very cool, Aouh!
what camera do you use to record your videos??? do you use any kind of "extra" microphone??
Gurl, wtf. ¡¡¡¡You are amazing!!!!!
I just discovered this channel and have been watching your videos all day
hewo i love your videos and your guys accents!!
I have never been this early- anyways I love your videos and I have recently found your channel but I've watched so many of your videos already 😂
That is amazing and I now am curious if you would sell these (not the originals but making it again)? Really love dragons and this looks amazing.
Ps: the enderdragon is a girl as she has a egg and is based on the west European dragons.
Pretty cool😎
Thank you for sharing✌💛☺
Hi! LOVE It! I was wondering what about burning the polymer with the cables and the LED light ... It seems to work without burning It haha at which temperature did you put the oven? Thanks!
Imo the ender dragon looks like Alduin from skyrim [either way I'm impressed]...
I thought so too ! And with the UV led eyes, she could make the wall things where you learn new screams (haven't played in a long time, and only in French...) and have the funds written in a special ink that only shows under UV light 🤩
That takes incredible skill. Well done its awesome!
Aww... look it’s your friendly neighbor man-eating dragon❤️❤️
Love ur stuff, this looks amazing!
The main why I
Result is amazing !
Is there anything you can't do?? Everything is amazing ❤️
THIS IS SO EPIC it looks so cool I wish dragons would be real but like not mean ones that want to kill us but it would be cool to have a pet dragon
3:20 Yeah, it's a she, that's why it drops an egg when you defeat it
Oh... Right... I'm a dumbass :')
@@Nerdforge Nooo!