each improvement and update is better than other, these solution to POINT ZERO, in steep motors is great, and the use of Analog pins save a lot space in projects, and a possibility to write in 7 segments digits, gave the professional touch, thanks Sebastian.
Cool features, especially about 7-segment indicating! Sebastian is any way to add "+" symbol to LCD indication , i mean some kind of " VS +100 ft/min"?
oh, im talk about LCD, not 7-segment... mmm... hard to explain. i have poor english )) I mean, how to add "+" to positive data (like vertical speed value) displayed on LCD, instead of "-" when negative data. With negative data "-" added automatically, but how to add "+" ?
KC Salo the lcd should be able to display it but you probably have to use another Config that just handles +/- and then you can use this as placeholder for your LCD
sebastian thanks for all, Please when you say in the new features Item (requires FW1.9.2), what means that? for example #6: Automatic stepper calibration support (requires FW1.9.2), because I have a problem with compass whiskey to set zero point, thanks, If this is the firmware when i Found it?
silvio bisanti every Stepper will have it’s individual zero position so a common switch or so would not make sense in my opinion. How would you think that could work?
each improvement and update is better than other, these solution to POINT ZERO, in steep motors is great, and the use of Analog pins save a lot space in projects, and a possibility to write in 7 segments digits, gave the professional touch, thanks Sebastian.
Cool features, especially about 7-segment indicating! Sebastian is any way to add "+" symbol to LCD indication , i mean some kind of " VS +100 ft/min"?
KC Salo which segments should be lit in your opinion?
oh, im talk about LCD, not 7-segment... mmm... hard to explain. i have poor english )) I mean, how to add "+" to positive data (like vertical speed value) displayed on LCD, instead of "-" when negative data. With negative data "-" added automatically, but how to add "+" ?
KC Salo the lcd should be able to display it but you probably have to use another Config that just handles +/- and then you can use this as placeholder for your LCD
thanks!!! i'll try
it is strange, but in v7.8.1 "Config References" data in Config Wizard not saved. After app reopen "Config References" data lost and set to default ((
Por favor indicar cuál es el ID para los displays de presurizacion del overhead del 737 800, gracias
sebastian thanks for all, Please when you say in the new features Item (requires FW1.9.2), what means that? for example #6: Automatic stepper calibration support (requires FW1.9.2), because I have a problem with compass whiskey to set zero point, thanks, If this is the firmware when i Found it?
it simply means that you have to upgrade to the latest firmware version to be able to use this feature.
@@MobiFlight thanks
Sebastian is their any support for micro drivers?
@Ismail Ocal there is a fw included for the pro micro but I haven’t tested it in a long time. Mega is best supported
MobiFlight
When would you be supporting micro drivers?
I have 7 segments for electric panel and flight land altitude regards
For the calibration pin, is there a physical wire that leads to it or is it just a virtual position?
JoeMartin1968 yes, you have to provide the signal for the home/zero position which is provided by some form of switch that is wired to that pin
@@MobiFlight Okay, I will need to figure out what type of sensor to use but at least I now know. Thanks! Great software BTW!
Good job! Is it possible to use only one switch to put all the steppers zero?
silvio bisanti every Stepper will have it’s individual zero position so a common switch or so would not make sense in my opinion. How would you think that could work?