Hi! Thanks for pointing that out, it was a typo in the video 😅 Please follow the instructions from the description. 3mm Cotton Cord Braided 90in x 2 40in x 1 20in x 1
Hi! After cutting my cords based on the picture and starting the project, I realized something was not right. Since a lot of us are visual, would you consider fixing the picture to correspond to the narrative. The picture should show 90 in x 2, 40 in x 1 and 20 in x 1. Also, how far from the hook are you measuring down in the first knot and how long is the length of the project before you wrap it? Thank you
Thank you 🙏 I wish I can visit Chile 🇨🇱 Here are the materials measurement in centimeters: •1st Design (18cm length) 3mm Cotton Cord Braided 230cm x 2 102cm x 1 51cm x 1 •2nd Design (18cm length) 3mm Cotton Cord Twisted 153cm x 4 51cm x 1
In the first design how is there 2 cords in the end longer by 70 inches if only 1 cord is cut to 90 inches.. the other two are 40 and there’s 1 that’s 20.. I’ve measured so many different ways to make the first design and I had to actually cut more cords cause 2 70inch cords on the end is impossible when there’s only 1 90in cord.
Hi! Sorry for the confusion, I've actually made corrections in the Description Box regarding the cords. Here it is: 3mm Cotton Cord Braided 90in x 2 40in x 1 20in x 1 Thanks for noticing it 🙏 Happy Knotting 😊
What if I wanted to make the first design wider could I just add more cords to the d-ring? I also want to make this design into a camera strap any advice?
Hello! Yes, you can just add more cords, make it 4 or more if you have a large d-ring or you can use a different cord size like 5mm or thicker. Hope this helpls 😊
Atma namaste mam...u have given wrong size n video..for first one..90in is two nos..but mentioned as one..40 in is one but mentioned as two in the first one in the video..it will be nice if it is rectified..
The size of the first design in the wideo and the instructins below are diferent.
Whats the corect one?
Hi! Thanks for pointing that out, it was a typo in the video 😅
Please follow the instructions from the description.
3mm Cotton Cord Braided
90in x 2
40in x 1
20in x 1
1cut 1 @. 90 “ but reply has 2 and then 1 @40”?
I have waisted my chord according to directions 😢
Hi! After cutting my cords based on the picture and starting the project, I realized something was not right. Since a lot of us are visual, would you consider fixing the picture to correspond to the narrative. The picture should show 90 in x 2, 40 in x 1 and 20 in x 1. Also, how far from the hook are you measuring down in the first knot and how long is the length of the project before you wrap it? Thank you
Love these 😍 what size D ring did you use?
Love it! Thanks a lot, and can you use also a cms measure? A big hug from chile
Thank you 🙏 I wish I can visit Chile 🇨🇱
Here are the materials measurement in centimeters:
•1st Design (18cm length)
3mm Cotton Cord Braided
230cm x 2
102cm x 1
51cm x 1
•2nd Design (18cm length)
3mm Cotton Cord Twisted
153cm x 4
51cm x 1
Thank you!
In the first design how is there 2 cords in the end longer by 70 inches if only 1 cord is cut to 90 inches.. the other two are 40 and there’s 1 that’s 20.. I’ve measured so many different ways to make the first design and I had to actually cut more cords cause 2 70inch cords on the end is impossible when there’s only 1 90in cord.
Hi! Sorry for the confusion, I've actually made corrections in the Description Box regarding the cords. Here it is:
3mm Cotton Cord Braided
90in x 2
40in x 1
20in x 1
Thanks for noticing it 🙏 Happy Knotting 😊
hi. what kind of glue did you use on the video?
What if I wanted to make the first design wider could I just add more cords to the d-ring? I also want to make this design into a camera strap any advice?
Hello! Yes, you can just add more cords, make it 4 or more if you have a large d-ring or you can use a different cord size like 5mm or thicker. Hope this helpls 😊
Can I use 4mm braided cord?
Absolutely! 😊
Atma namaste mam...u have given wrong size n video..for first one..90in is two nos..but mentioned as one..40 in is one but mentioned as two in the first one in the video..it will be nice if it is rectified..
Hi thanks for noticing, I have put the correct cord size in the description box. Sorry for the confusion ✌️✌️