I did the same thing with General Hawk's goggles and I am more happier with that look rather than those black ones that don't fit right at least until I can find some online that fit 1:12 scale figures and I am so glad that Ripper's glasses fit better. TMan brother you are the man and I enjoy your reviews of figures, D Amazing, and J Hernandez.
I typically use Gorilla Mounting Putty. It works well on Caucasian figures like Buzzer, as the putty blends nicely with his skin and hair. However, I'm now curious about Hawk's goggles and plan to take a closer look at them.
I have some bikes listed on this Amazon list but you can find them and Target's toy vehicle section for like 10 bucks www.amazon.com/shop/tman978/list/3UACQZHREVCQ?ref_=cm_sw_r_apann_aipsflist_aipsftman978_6X4HW84YHQWMJ704ZCD4&language=en_US
Whats really odd is that every review I seen of Buzzer his glasses wont stay but I must be lucky on my copy because all I did was warm mine up and they stay on even when I shaky them. But I did have to glue Rippers gun cartridge in because so soft. Nice vid! Oh and my Buzzer does have a loose ankle like yours🎉🎉🎉🎉🎉
@@TMan978 they do! I heat them in warm water one time to straightened them with his head and they go behind his ears good and you press on the eye part and boom!
Haven't picked him up yet (way behind on these figures), but the glasses already annoy me. Wish his ponytail was on a ball joint, too. Oh well. Solid review as always, thanks and take care! 😎👍
I came, I watched...I agree on many things with this figure...I may try my spare pair of Sgt Slaughter Action Force glasses and glue them in place....So different than what we see in Ripper..Hopefully they'll take the good from that figure and put it into Torch.
The unfortunately are doing a Marvel Legends style thing where they aren't letting the old molds die depending on the character. It will probably be a few more years before they retire it completely
An honest, first-rate review of Buzzer and his cool accessories other than his glasses!
Since Hawk doesn't need his goggles on his head imo, I used those to give buzzer an authentic look
For real? I'll check that out
That's too far off for me. He wore sunglasses. I rather go with what I went with.
I did the same thing with General Hawk's goggles and I am more happier with that look rather than those black ones that don't fit right at least until I can find some online that fit 1:12 scale figures and I am so glad that Ripper's glasses fit better. TMan brother you are the man and I enjoy your reviews of figures, D Amazing, and J Hernandez.
I typically use Gorilla Mounting Putty. It works well on Caucasian figures like Buzzer, as the putty blends nicely with his skin and hair. However, I'm now curious about Hawk's goggles and plan to take a closer look at them.
Oh! Tman where can I find motor bikes?
Cool displays 🎉🎉🎉🎉
I searched on UA-cam under Harley Davidson gi joe classified!
Nice bikes!
@@tgraz559 Thank --- You!!!!
You know amazon has some of these bikes for reasonable prices??
✨✨✨✨✨
I have some bikes listed on this Amazon list but you can find them and Target's toy vehicle section for like 10 bucks
www.amazon.com/shop/tman978/list/3UACQZHREVCQ?ref_=cm_sw_r_apann_aipsflist_aipsftman978_6X4HW84YHQWMJ704ZCD4&language=en_US
Whats really odd is that every review I seen of Buzzer his glasses wont stay but I must be lucky on my copy because all I did was warm mine up and they stay on even when I shaky them. But I did have to glue Rippers gun cartridge in because so soft.
Nice vid! Oh and my Buzzer does have a loose ankle like yours🎉🎉🎉🎉🎉
If your glasses stay on you are massively lucky
@@TMan978 they do!
I heat them in warm water one time to straightened them with his head and they go behind his ears good and you press on the eye part and boom!
I did that and it didn't work for me.
@@TMan978 Nah You did good with the glue!
🎉🎉🎉🎉
Use some floor polish to tighten the joints.
Haven't picked him up yet (way behind on these figures), but the glasses already annoy me. Wish his ponytail was on a ball joint, too. Oh well. Solid review as always, thanks and take care! 😎👍
Thank you for watching
I love that Ripper’s groupie is Domino.
You should do an “Old Man Buzzer” custom and use Old Man Hawkeye head sculpt with the same shades.
Just got ripper. He’s great. Atleast his glasses are vipers and fit better than buzzers
Definitely need this. But come on Hasbro. Could have been better. Great 🧊Chill🧊 Review ✨️😃
Ttue
I came, I watched...I agree on many things with this figure...I may try my spare pair of Sgt Slaughter Action Force glasses and glue them in place....So different than what we see in Ripper..Hopefully they'll take the good from that figure and put it into Torch.
We shall see mortal, we shall see!
Explain that “meh” for Ripper, TMan
If I said Ripper, that was an accident. I was talking about buzzer and then I went into detail about why I was talking about him
I thought they were going all pinless now but he has them in his knees
The unfortunately are doing a Marvel Legends style thing where they aren't letting the old molds die depending on the character. It will probably be a few more years before they retire it completely
Great figure but i hate the glasses. Same problem with the Beast X-men's uncanny series figure.
If ever there was a case for an alternative head, here it is! Nice enough figure otherwise
Dreadnoks vs
Ninja Turtles now. Fight.
🫡✌️👍Later
The glasses are a let down
Looks like Mr potato head glasses stretched around the head
First!
3rd
Those glasses suck and I have the figure and plus they are not the right color to match the cartoon.
True & true