dude with the recovery truck is lucky he didn't get injured or killed. Guy who got that thing stuck should have had to shovel all the mud out from in front of it.
Wrecker driver is a complete amateur. He should have used the quad tired tractor as a dead man, instead he puts it on the front of his truck and only runs two snatch blocks, lucky he didn't get seriously hurt. All that iron sitting around as a deadman and he still ended up breaking his rigging, ridiculous.
Easy, just run it into a muddy area with thin roots or low hanging branches and it'll be stuck pretty quickly. The thinner roots are like wire just made for getting stuck in the drums and chaindrive in the back, saw some pictures once of one that had almost pulled a tree down on top of itself. A Vityas DT-30 though ... that might take some work. It's fully amphibious and good at headbutting trees. :)
just dig the mud out in front of it and in between the tracks and hook strait horse power to the front of it. You guys need bigger chains and cables to deal with this kind of stuff not to deal with small trucks such as semis
It is beyond me how you could be dumb enough to get a 400k 600 hp case ih quad track stuck in mud. It is also beyond me why anyone would be stupid enough to drive anything that heavy into a mud pit, quad track or not.
I am assuming the idiot was the guy who tried to drive it out after he was already stuck (probably the same guy who got it stuck in first place). We farm a lot of treacherous spots and normally when you get in trouble we try very gently to back out if possible and don't dig it down. One tractor is almost always enough to get you out if you don't go in too far and for Christs sake don't dig it down until you can't see the tractor!
it really hurts to see a new tractor smoke blue like that.. like an old fordson major or an old fergusson... :/ i wonder how they treat their equipment.. i wouldnt like to have those working with my mashines.
@farmeraaron1 first off, newer tractors like that I don't give a shit how much weight you put on them they are still light for their weight compared to real tractors before plastic shit became common and I want to know why in the hell you would drive anything into a shithole like that. You need to either take all the weights off so they f"float" or put on a bunch of weight with narrow tire so they dig in to bite. Or buy a nice vintage Allis-Chalmers tractor real 100% American steel
I would have to say no matter the brand or what you have for a tractor, if you find a sinkhole and your riding weight is heavy, your going to sink no matter what, it just isn't going to be a good day, i have seen even skidders that were meant to be in marshy areas sink to ag lime spreaders go down and get stuck. just physics and murphy's laws.
I'm sorry but this guy should know the terrain and the limits of his tractor before diving into all that. It takes some serious shit to get a Case IH stuck, and his mind must be full of some serious shit to try and tackle it. What was he trying to do with that front plough? Shift 50 tonnes of wet mud? serious shit man....serious shit
I'm guessing that you have never broken a chain before. Chains aren't nearly as dangerous as cables. You break a chain, one link breaks and the two remaining lengths of chain fall to the ground. I have seen it from the cab of a tractor being pulled out. You break a cable though, shit is about to happen.
You guys have to be so hard on people just because they get stuck? Everyone gets stuck I don't care who you are. Just because your stuck doesn't make you an idiot it just happens. Clearly the hole was not that bad to begin with just look at the pictures at the end.
You, sir, have not a single clue what you are talking about. btw; a tractor's power does not come from the body work... Just so you know. Stop making a fool of yourself, sir. Get a girlfriend, and enjoy yourself with her. You need it!
If they had hooked up the John Deere to the stuck Case, and then the tow truck to the Deere, they could have used the power of the Deere to help pull, instead of just using it as an anchor for the tow truck.....could have been out in half the time.
I think this leads to WW3 :D LOL Case is a good tractor,but quadtrac isn't the best one. It's good to buy tractor with normal tyres and be normal guy.When it wouldn't be quadtrac he would get out 4 shure.I guarentee
this is not uncommon i recover machines like this all the time but we use our own purpose built recovery machine it would have had it out in 10 minutes but they did very well with wat they had good recovery.
The 360 machine driver wasn't much help until late in the recovery. He surely could have cleared a track around the front of the stuck machine instead of being a spectator.
Quad tracks are not junk fool! John Deere can't make a good rubber track tractor! A quad will out perform a john Deere. Too bad too cause I'm a john Deere guy.
Nope. I had a 9400T ran it for 5600 hrs. They don't cut it in wet conditions. I had to swallow my words about quadtracks, and buy one. They are far superior.
Hey did u here what one quad trac driver said to the quad trac driver? It wasn't hey I'm stuck maybe we better get a tow truck or I never said u might get hung too! lol listen up your fellows when u get stuck or even u can't move anymore just stop. Stop! The longer u wallow around is the longer ur going to be getting it out. Trust me don't try and be a hero. I've gotten a trackloader stuck 2 times in23 years and 10 of them wasmucking out and filling sediment ponds for builders. And I stopped and we was able to get the 973 out with a small dozer. I learned that when we was trying to fish a excavator out of one.i was young then and all the old kept saying see what happens when up dumb shit. Yeah the guy did it cleaned his stuff out and took off before we got there. We called him aqua man
sometimes it may be hard ground on the top but as you work on it pushing it brings the water to the top .you only have to get stuck a little bit at first and buy the time you have tried to get out it's to late the sucktion has got a hold of you. it's ok all you lot saying how did it happen it can and dose to the best of people
No, not to the best of people. These people are quite far from being the best, in fact if breathing involved any level of thinking, they would all expire immediately.
ok,den hat er wirklich gut fest gefahren den Case mit Raupenantrieb.Aber mit brachialem Maschineneinsatz gehts ja auch mal wieder aufwärts.Naja Spezialisten beim bergen
Quad Tracks are notoriously difficult to pull because the tread is angled upwards so the bogey won't tilt forward. Even under power when they have no traction they offer huge resistance and must be literally dragged on their "feet" pushing and dragging tons of muck along the way. One of that size and bulk buried that deep... little choice but to lift it to give tractors a chance.
quad track has about 500HP, and weighs 55,000lb. they don't float. We all can learn from this. Chains and winches are dangerous, and the earth puts up quite a fight.
Would have a dual tire tractor gotten better traction? It just seems as if the lugs on the tracks are small and filled. Or metal dozer type tracks? At any rate that's one stuck machine.
because it's a nice flexible machine, once you're done you can take the blade off and put a plow at the back of it. Also, it's a bit faster than most dozer, which makes it good at light blade work such as spreading sand or plowing snow - It can do that faster than pretty much any dozer. So there's many different reasons for it ... besides, if you already had a quadtrack, why would you buy a dozer instead of just a blade for the quadtrack ? I'm sure that economics does play a big role.
Or dig a ramp out front of it. They were pushing waaaay too much mud & crud ahead and underneath! Looks like the strain on the blade broke some hydraulic hoses too!
The best way to pull that tractor out is to pull it at a sharp angle. It means your not pulling the full weight of the tractor. You would have it out in no time.
@Simon Barth i think so, the winch was pulling the plow sideways so the pressure would have been built up on one side, and lessened on the other. So it had to go somewhere...
They said it will go anywhere, but they didn't say it would return.
Whoever drives it into the mud pit shall bear the main responsibility! ……😂😂😂🌚🌚🌚
I have to wonder why the operator thought it was a wise choice to drive into that particular mud hole... pit...
dude with the recovery truck is lucky he didn't get injured or killed. Guy who got that thing stuck should have had to shovel all the mud out from in front of it.
3:30 some oil is poped out from the front hydraulics!
Running Start????? that is how things get broken
Looks like the Case was spitting out hydraulic fluid at 3:30...
Yep, probably not made to take that kinda pressure from the tow line.
620 is super very good in mud
Wrecker driver is a complete amateur. He should have used the quad tired tractor as a dead man, instead he puts it on the front of his truck and only runs two snatch blocks, lucky he didn't get seriously hurt. All that iron sitting around as a deadman and he still ended up breaking his rigging, ridiculous.
Is not 620 this is 535 307,8 hp in hidraulic timon 620 is 537,9 in hidraulic timon
Talk about using the complete wrong Fricking tool for the task at hand
Good job 👍😃
Easy, just run it into a muddy area with thin roots or low hanging branches and it'll be stuck pretty quickly. The thinner roots are like wire just made for getting stuck in the drums and chaindrive in the back, saw some pictures once of one that had almost pulled a tree down on top of itself.
A Vityas DT-30 though ... that might take some work.
It's fully amphibious and good at headbutting trees. :)
just dig the mud out in front of it and in between the tracks and hook strait horse power to the front of it. You guys need bigger chains and cables to deal with this kind of stuff not to deal with small trucks such as semis
It is beyond me how you could be dumb enough to get a 400k 600 hp case ih quad track stuck in mud. It is also beyond me why anyone would be stupid enough to drive anything that heavy into a mud pit, quad track or not.
True. You can get anything stuck.
It's hard to imagine, this is really embarrassing😅, this mud pit is too deep......😂😂😂😂😂
are you kidding me......why in the hell is it in there?? and who puts blades on quad tracks?? Ive had some shit stuck but damn..
Sunken shame ... :-)
That's Case, but I don't understand why he drove in this dirty whole??
I am assuming the idiot was the guy who tried to drive it out after he was already stuck (probably the same guy who got it stuck in first place). We farm a lot of treacherous spots and normally when you get in trouble we try very gently to back out if possible and don't dig it down. One tractor is almost always enough to get you out if you don't go in too far and for Christs sake don't dig it down until you can't see the tractor!
it really hurts to see a new tractor smoke blue like that.. like an old fordson major or an old fergusson... :/ i wonder how they treat their equipment.. i wouldnt like to have those working with my mashines.
So pulling backwards instead of going forwards was out of the question correct?
The track deere is no comparison to the case quad, not even in the same league anymore, case's technology in the track system is far superior.
@farmeraaron1 first off, newer tractors like that I don't give a shit how much weight you put on them they are still light for their weight compared to real tractors before plastic shit became common and I want to know why in the hell you would drive anything into a shithole like that. You need to either take all the weights off so they f"float" or put on a bunch of weight with narrow tire so they dig in to bite. Or buy a nice vintage Allis-Chalmers tractor real 100% American steel
I would have to say no matter the brand or what you have for a tractor, if you find a sinkhole and your riding weight is heavy, your going to sink no matter what, it just isn't going to be a good day, i have seen even skidders that were meant to be in marshy areas sink to ag lime spreaders go down and get stuck. just physics and murphy's laws.
I'm sorry but this guy should know the terrain and the limits of his tractor before diving into all that. It takes some serious shit to get a Case IH stuck, and his mind must be full of some serious shit to try and tackle it. What was he trying to do with that front plough? Shift 50 tonnes of wet mud? serious shit man....serious shit
I'm guessing that you have never broken a chain before. Chains aren't nearly as dangerous as cables. You break a chain, one link breaks and the two remaining lengths of chain fall to the ground. I have seen it from the cab of a tractor being pulled out. You break a cable though, shit is about to happen.
You guys have to be so hard on people just because they get stuck? Everyone gets stuck I don't care who you are. Just because your stuck doesn't make you an idiot it just happens. Clearly the hole was not that bad to begin with just look at the pictures at the end.
You, sir, have not a single clue what you are talking about. btw; a tractor's power does not come from the body work... Just so you know. Stop making a fool of yourself, sir. Get a girlfriend, and enjoy yourself with her. You need it!
If they had hooked up the John Deere to the stuck Case, and then the tow truck to the Deere, they could have used the power of the Deere to help pull, instead of just using it as an anchor for the tow truck.....could have been out in half the time.
Blading in a swamp.....hmmm, we don't do that here....
I think this leads to WW3 :D LOL Case is a good tractor,but quadtrac isn't the best one. It's good to buy tractor with normal tyres and be normal guy.When it wouldn't be quadtrac he would get out 4 shure.I guarentee
this is not uncommon i recover machines like this all the time but we use our own purpose built recovery machine it would have had it out in 10 minutes but they did very well with wat they had good recovery.
In Germany, we are dreaming of such a machines ;-) Nice Video!
futpc
The 360 machine driver wasn't much help until late in the recovery. He surely could have cleared a track around the front of the stuck machine instead of being a spectator.
"US NIGGA'Z NEW'S FLASH!.."they really "HEATE! dat case IH quadtrac "&!.."U can bet yo whole crop that Case IH quadtrac does not belong 2 1 of them
Quad tracks are not junk fool! John Deere can't make a good rubber track tractor! A quad will out perform a john Deere. Too bad too cause I'm a john Deere guy.
Nope. I had a 9400T ran it for 5600 hrs. They don't cut it in wet conditions. I had to swallow my words about quadtracks, and buy one. They are far superior.
I work at john deere as a mechanic and we got a case in on trade... biggest piece if shit... John Deere is quality compared to that steiger junk
So whose the idiot that drove it there.. And why not pull it back instead of all the way thru..i think a wheel machine would handle this better
The excavator is sitting there why not dig the mud away to break the suction? Too many good machines get wrecked by not digging them out.
even after the cable snaps there always has to be some idiot that stands way to close that has nothing to do with whats going on
Not quite sure why i just spent 5 and a half minutes watching this.......drunken UA-cam surfing is quite interesting.......
why would anybody think it was a good idea to go in there, but i bet an old row crop farmall A would go in n out no problem
Stupidity! If the ground was THAT SLUSHY AND MOIST SATURATED, then even a full metal tracked crawler would have failed!!
why are quadtracs used with blades on the front like this anyway, is it because they're cheaper then proper bulldozers?
Hey did u here what one quad trac driver said to the quad trac driver? It wasn't hey I'm stuck maybe we better get a tow truck or I never said u might get hung too! lol listen up your fellows when u get stuck or even u can't move anymore just stop. Stop! The longer u wallow around is the longer ur going to be getting it out. Trust me don't try and be a hero. I've gotten a trackloader stuck 2 times in23 years and 10 of them wasmucking out and filling sediment ponds for builders. And I stopped and we was able to get the 973 out with a small dozer. I learned that when we was trying to fish a excavator out of one.i was young then and all the old kept saying see what happens when up dumb shit. Yeah the guy did it cleaned his stuff out and took off before we got there. We called him aqua man
Chain snaps. Man immediately walks under other chain and takes a look. This could have been a very different video...
all that blue smoke coming out makes me think engine was cold at start but yet he revs the shit out of it,poor motor
the damage has been done. the operator is gonna be leaving.
sometimes it may be hard ground on the top but as you work on it pushing it brings the water to the top .you only have to get stuck a little bit at first and buy the time you have tried to get out it's to late the sucktion has got a hold of you. it's ok all you lot saying how did it happen it can and dose to the best of people
No, not to the best of people. These people are quite far from being the best, in fact if breathing involved any level of thinking, they would all expire immediately.
if he got a running start, the tractor would have skipped over the mud, like a snowmobile on water.
The dude who got it stuck should have to wash all the vehicles AND buy at least three rounds of beer
Ikr? Probley a 400 grand tractor am I right? I do not know cause I do not own neither a case of farm.
using huge tractors with blades on them?? what the hecks wrong with a cat dozer?? i dont get it
What the hell was he/she doing in that mudhole with a POS Case like that? Hope they were fired.
Seems a problem with track vehicles. Once they sink in, they really sink in...............??
yep they won that challenge. the next challenge is to get a fordson snowmotor stuck!
ok,den hat er wirklich gut fest gefahren den Case mit Raupenantrieb.Aber mit brachialem Maschineneinsatz gehts ja auch mal wieder aufwärts.Naja Spezialisten beim bergen
How in all holy hell did you get a quadtrac stuck that far down to the bollocks!!
Whoever drives it into the mud pit shall bear the main responsibility! ……😂😂😂🌚🌚
thats the problem with tracks XD if you actually get stuck u are fucking stuck!
Really one of the most stupid things i have seen.
The driver should be sacked.
What the beck is wrong with that engine on the quad!?!?!?
What!?, with these two beasts could turn the worldwide!!
this may sound stupid but how did you sink a quadtrac in the mud? how did you even do that? did you poot 20.000kg on it or something
Quad Tracks are notoriously difficult to pull because the tread is angled upwards so the bogey won't tilt forward. Even under power when they have no traction they offer huge resistance and must be literally dragged on their "feet" pushing and dragging tons of muck along the way. One of that size and bulk buried that deep... little choice but to lift it to give tractors a chance.
not really a comparison is it?? ones a wheeled artic the other a tracked!
how can track gfuck up the road if they make less pressure do the ground
I wouldn't want to be the one to have to clean all that mud out of it.
Use the backhoe and put it on the blade and pull he would of made it
quad track has about 500HP, and weighs 55,000lb. they don't float. We all can learn from this. Chains and winches are dangerous, and the earth puts up quite a fight.
Not very smart people with expensive machinery = bad combination
Would have a dual tire tractor gotten better traction? It just seems as if the lugs on the tracks are small and filled. Or metal dozer type tracks? At any rate that's one stuck machine.
because it's a nice flexible machine, once you're done you can take the blade off and put a plow at the back of it. Also, it's a bit faster than most dozer, which makes it good at light blade work such as spreading sand or plowing snow - It can do that faster than pretty much any dozer.
So there's many different reasons for it ... besides, if you already had a quadtrack, why would you buy a dozer instead of just a blade for the quadtrack ? I'm sure that economics does play a big role.
Or dig a ramp out front of it. They were pushing waaaay too much mud & crud ahead and underneath! Looks like the strain on the blade broke some hydraulic hoses too!
Poor display of rigging....go back to tow truck school...
The best way to pull that tractor out is to pull it at a sharp angle. It means your not pulling the full weight of the tractor. You would have it out in no time.
Buy a massey, buy the best then buy a rope and tow the rest!
Engine on that tractor is poor....stupid drivers destroy it
that thing would need a washer :)im swede thats the spelling
die haben ja keine skruppel bei der seilstärke :D und gefahrenaufenthalt
thats a spendy wrecker bill I bet... and ya shit happens.. but looks kinda soupy to me to even try to go in there...
casie wanted to play in the mud hole just let her! lol
@Simon Barth i think so, the winch was pulling the plow sideways so the pressure would have been built up on one side, and lessened on the other. So it had to go somewhere...
hammer alle stehn vorne drann rum
wenn son kettenglied fliegt viel spass
amis halt
how the hell can you sink a quadrac so deep in the mud!! only with moving and moving and moving in stuckness
what a waste of money and time...sucks to be the guy who got it stuck...
What were you guys doing when you got stuck? Is that a spring its stuck in? Canada or USA? Cheers
What are you guys pushing with those blades? Looks like something that would be used for snow, or other soft materials.
They whoop John Deeres ass.
Boy when you guys get stuck you don't mess around
At 2:27 and 2:30, is that Hydrolic hoses breaking? (fluid shoots out)
24 toneladas não é fácil para remover
Good place to leave that pile of shit quad track
Get a QuadTrac they said, It will go anywhere.
if they use the backhoe to take the plow off it would have been easier to get out
If you pulled it back, the blade might have ended up dragging in the mud making it even harder to pull.
Again, STRAPS and I'm not talking about pedal to the metal. Just a slight jolt.
get out the FArmall H to puller out
i dont even get it, whats it doing there?
I haven't laughed that hard in a while.
If you want American Iron then you want a Big Bud.