Very much appreciate. Like all your videos, it's nice to see someone that makes things, not excuses about why they won't work. Excellent work. from a ham with no snaggle-toenails!
That was me that made the online statement on one of the FB groups but was careful not to mention you directly. i did not see any other videos beyond the one i saw where you were talking about these HP supplies and was really wanting to know how to correctly wire them up. Now that you have detailed the "how to" for these, I will relate that back to the FB group. Sorry if anything I said was taken out of context, I was simply trying to gather this ^^ information. Thanks for detailing everything.
These have been used in the RC world for a while. Big Lipo chargers like the iCharger 30 series and 40 series chargers need a big 24V power supply to operate at their maximum ratings so series connection two HP DPS's was found to be less than half the price of the power supplies the RC websites were selling (and they weren't putting out enough power to max out the biggest iChargers and other 30/40A Lipo chargers)
BBI You were sounding beautiful over here in new york 2 minutes ago, I was trying to call you on the radio but my mudduck 5 pill station just doesnt have it over those other boys. Thanks for all your help over the years brother! godbless and keep keyin down!
15:50 Since this PSU is made for an HP Server, this second tab feature's main purpose is power redundancy. In the event one PSU fails, another will take over. It's hot-swappable meaning you can remove one PSU without powering down the load unit and replace it with a new one. NOTE: This feature only works on the same PSU model; it does not mix with other PSU models.
I ordered a bunch of these puppies! So freaking happy to be able to build affordable supplies for my guys!! People are getting tired of me telling them $600 for a 200amp power supply, Now I can make the box HALF of the size and charge them HALF as much!!
@@joshchilders-fy1pk wtf are you babbling on about? Because I don’t post videos of my builds and jobs means I don’t know nothing about supplies? Wtf lol
Quick question Master, are you aware of changes depending on the revision? I just got 2 and they are REV16F so wondering if they will work the same. Thanks in advance.
Normally one has to be floating by shielding all of the low side circuitry from earth. Not sure if you can do it with these. Perhaps, if you don't use the load sharing pin and you remove any low side connections to the earth cable / casing on one PSU. Let me know if it works and we can go for 50V for LDMOS Would be a cheap unit but you might want 8 of them to run any bigger ldmos amps. if you could put 4 in series will we still be limited to around 1200W but at 48V or a bit higher or will we get 4800W @50V? Some LDMOS are already 1200W so you would want at least 1500W capability I would say. I have a load of old military spec supplies somewhere. Think they might run LDMOS. Anyway I just picked up two of these. What a great deal for 2400W of power.
@@Tomahawk-415 ya I forgot about the crowbar, I’m thinking a duel faker 4 position switch with the required resistors for both the vdc and crowbar circuit. Example position 1 would be 12vdc position 2, 13.8 vdc and so on. Would just take some fooling around with resistors.
Great videos. Clicked on your link for the EBAY seller and seems link is no good. Any chance of posting the sellers store link? Very interested in getting started. Thanks. EDIT: Found him but no units listed. Is there a difference between the units with the blue plug receptacle and the black one other than color? A few on line have made reference to this although I see no difference. Thanks
What an Great person doing a great work. I actually Bought 3 of these same models for an mod which only some chosen ones decided to do. I want to apply 240 Volt Dc from solar and use this to charge my 12v battery bank. Unfortunately this does not turn on 240 to 200 volt DC and It turned on instantly with 240volt Ac. I tried so much to mod it and read online articles so much but this model is not turning on high dc voltage. My other smaller switching power supplies of 5amps have no problem running on 240 to 200 volt dc but this model i want to run is not turning on. Please help me if you can in any way it will be much appreciated. I want to use this as an mppt from solar.
Good Morning Fellow BBI FANS & FRIENDS: MR. LUKE I believe you have opened up a new world to those searching for a switching power supply alternative that delivers heavier current output with just a little love & affection. Thank you for another informative video, God Bless, TMP, Unit 22, from N.J.😊😊😊
Hello sir , great info , I build 18650 charging boards and I’ve been trying to find a mod just like this … for ever 4 packs of 4 batteries I need to add a PS thank you 🙏 sir
3:57 There are many, many people out there (actually an incredible huge amount) that doesn't want to do a god dam shit by them self but want everyone else do it for them for free so I was not chocked at all. "Why should I look at the video at all when I can just ask him, you do the work for me! I don't give a shit just do it because I tell you to!" That is the average Joe on UA-cam.
hello Mr bbi. I have one question . I have a 2x8 . why is my swr high on output. swr changes with power output the lower the dead key the high the swr . and when I modulate it swings backwards? I don't think it has anything to do with my coax ro antenna . because when I run my 2x4 the swr is fine . can I get your opinion on this matter please. thank you . Mr bbi.
@Mr BBI actually they are almost at 100%. The idle voltage is 15.9v on your supply, and the max is 16v on Caps. Easy math.., dunno where you got the 95.5% because that's wrong, it's actually 99.9%, to be exact, not including inefficiencies. 15.9v X 99.99999% = 15.89999841v The usual tolerance is 10%, but remember these are used, and probably have a billion hours on em. Caps are cheap, I'd replace em with a higher voltage rating, especially pushing them to the voltage limit. It's not any different than rebuilding an engine and putting USED crank bearings back in. If 1 Cap shorts from running to hard ( and WE both know eventually they will), the entire supply goes dead. Food fer thought:)
Great video I have gotten other models before i seen your video they seem ok. I have not done any voltage increase mods yet just getting started. There fb 1A pd-19 same turn on way .I also got a Samsung power supply for 9.00 tried it same way just about to turn it on pin 1and5 have not seen any mods for them yet. We shall see it's on back burner I'm a hobbyist not nearly in you're field I am only as smart as you tube lol. I have been in dc fork lift repair before i retired have some experience. So in closing thanks for you're video's.
@Mr BBI I am in the UK, different supplier but I found out the problem! My multimeter probe was faulty! So I have 15k on the variable and 51k on the chip and I am seeing 14.5vdc working perfectly!🤗 thanks for all your help on this project bro! All the videos and the chat in the group have been super helpful!🤗👍🏼 052 in Scotland waving a hand!👋🏴👍🏼
Hey Mr BBI. Have you thought about drilling holes through the board where the positive and negative strips are. That would allow for 100% wire attachment for those that don’t have big high watt soldering irons. I’ve modified a couple different power supplies over the years. This by far seems to be the easiest. I ordered to and should be here this weekend. Thanks for the info. I love watching your videos
I've seen a couple people mount lugs of different kinds by drilling through the strips. I'm hesitant to try it but with the PSU's being so cheap I might give it a shot. Would make my 4mm binding post/banana jacks much more secure because currently I'm soldering them which is secure but takes a lot of solder and isn't the cleanest looking. Just gotta make sure you use high quality solder. I use MG Chemicals 63/37
What type of 12 volts 300 ampere power supply is best between :- SMPS, EI Transformer & Torodial Transformers for playing one 12 inch, 2,000 watts rms sub-woofer through one 3,500 watts rms mono car amplifier at home ? Plz suggest
Can't learn much by skipping through a video. Personally I value the knowledge you share with us and waste your efforts by skipping through your videos.
In most of these supplies the mains ground is connected to the output ground, so series connection requires modification. Also put a serious diode in parallel with each supply to prevent backfeeding power if one switches off.
I'm not a box builder or run any stuff anymore but I'm still thinking of picking a few of these up. I mean 100amps for 20-ish bucks is ridiculous. I payed like 300 for 70 amps when I bought an Astron back in the day. How could anyone pass on this? lol
Thank you 👍. I'm going to try one with my TS 480 HX Kenwood HF transceiver. Just about all of the switching power supply's I have tried are noisy on 40 and 80 meters, kinda annoying. This is a whole lot more cost effective than a 70 amp astron transformer power supply. Not to mention weight. Thanks and 73 GOD bless Earnest K5EWM 👍.
Heather work exactly the same the difference is the mod on the inside of the power supply.. it requires a different set of resistors in a different set of locations. All that information is out there you just have to go find it
I have a delta dps-500gb h and I’ve been hunting for a while how to do this mod to it and I can find nothing🤦🏻♂️ any help would so greatly be appreciated. I am kinda out of options lol
I know! I'm just fucking with ya! I absolutely love your videos! I take electric stuff people toss in the trash and I have a ton of server PSUs! I'm currently going through them to see how many can do the same things! Love ya brother
I think over the next 3 months. I’m going to reverse engineer that, and play with the schematics a little bit. 😈 just as a side project to screw around a little lol.
So first you need to solder a diode wire to the circuit board then you need a switch soldered in to power it then you need to solder a wire in for current sharing and you still need a 110 plug in and these are 69$ to 144$ right now yeah lots easier BBI.
I took a chance & ordered 6 of them. Gonna build a power supply and I wanna do a rack mount supply to slide in the rack I’m building that will hold 3 of my most frequently ran mobiles,Johnson 223 & Galaxy Meleka.
hi bbibeauteful vide server suply have a lot o futurs votage control fan speed curent sering up to 4 units i think stability no noiz on cables they also hav a pin power ok i usualy put a led ther indikates separatly 13.8 is working i ben using a dps 800gb model a small coper bord wit extra caps and adorson powe poles istant 72 amps at 13.8v
Has me thinking better buy some of these before "_____" starts making fake ones or they start putting new labels on junk ones. side note: 1875 sold on his page.
There are actually many more server supplies from HP and Dell that can be modded in a similar way with slightly different pinouts, and layouts. It just so happens that he has one of the only videos that go into enough detail of this particular part number. Doubt China will notice. Dell makes a 3000w unit that is only about 1.5x's this size. HP makes a 1500w unit with yellow label the SAME size.
Oh man. Luke my Brother, you're a technician if I'm one and I'm pretty sure I'm one. FWIW, over 60% of the guys who made the Apollo project a success didn't have "Degrees" A self made man is damn hard to stop!
These plus are completely idiot proof.. You can stuck a screwdriver in them any where a ytime and after the "Splat-bang" its a really simple matter to scrap it for spares and buy another. When that goes the same way ? - why you have all those spares just connect pin 1 to pin 4 ffksk ! What could be simpler ?😂
.thank you for this helpfull info. Im from Holland, soo my question about this amazing model is, do this only 110 Volt, or is it switchable to 220 Volt ? And how much do i need to start my 1000 Watt Airconditioner..thank in advance..have a good day~♧~
Very much appreciate. Like all your videos, it's nice to see someone that makes things, not excuses about why they won't work. Excellent work.
from a ham with no snaggle-toenails!
Thank you, BBI, for sharing what you've learned about the HP Power Supplies! Just ordered two from Hopping Around!
That was me that made the online statement on one of the FB groups but was careful not to mention you directly. i did not see any other videos beyond the one i saw where you were talking about these HP supplies and was really wanting to know how to correctly wire them up. Now that you have detailed the "how to" for these, I will relate that back to the FB group. Sorry if anything I said was taken out of context, I was simply trying to gather this ^^ information. Thanks for detailing everything.
bro no worry's
Thanks Luke Miller, received mine today. Heavy for their size.
Lots more quality stuff inside if ya poke around that others lack. Been using the 700s for some time. Solid units
Nice video 👍 thanks for taking time and teaching us about these 73's god bless from 112 southern Illinois
Ordered 2 the other night when I saw your 1st video. Made the offer and said BBi sent me and baboom they're on their way. Thanks Bud !
Awesome video thanks this answered all my questions ❤
Thank you I've spent the last three days looking at these type power boxes, looking forward to stacking two of them to use on my Texas star 667v.
You only need 1
These have been used in the RC world for a while. Big Lipo chargers like the iCharger 30 series and 40 series chargers need a big 24V power supply to operate at their maximum ratings so series connection two HP DPS's was found to be less than half the price of the power supplies the RC websites were selling (and they weren't putting out enough power to max out the biggest iChargers and other 30/40A Lipo chargers)
BBI You were sounding beautiful over here in new york 2 minutes ago, I was trying to call you on the radio but my mudduck 5 pill station just doesnt have it over those other boys. Thanks for all your help over the years brother! godbless and keep keyin down!
Intelligible LED switch modules are definetly the present and future. Thanks for discovering and sharing.
Thank you, BBI. Prices have changed in a year. Wonder if you would sell a completed one?
15:50 Since this PSU is made for an HP Server, this second tab feature's main purpose is power redundancy. In the event one PSU fails, another will take over. It's hot-swappable meaning you can remove one PSU without powering down the load unit and replace it with a new one. NOTE: This feature only works on the same PSU model; it does not mix with other PSU models.
Not into ham or anything but just wanted to say its was a really good video, really appreciated!
I ordered a bunch of these puppies! So freaking happy to be able to build affordable supplies for my guys!! People are getting tired of me telling them $600 for a 200amp power supply, Now I can make the box HALF of the size and charge them HALF as much!!
Dude I looked at your site you no nothing about power supplys so just stop
@@joshchilders-fy1pk wtf are you babbling on about? Because I don’t post videos of my builds and jobs means I don’t know nothing about supplies? Wtf lol
I ordered an one. Ridge runner 505.. tenn
Quick question Master, are you aware of changes depending on the revision? I just got 2 and they are REV16F so wondering if they will work the same.
Thanks in advance.
Thank You Mr. BBI
Thank you for the information! Clear and precise.
Can you discuss setting two of these exact supplies up in series for 24v. Thank you.
Normally one has to be floating by shielding all of the low side circuitry from earth. Not sure if you can do it with these. Perhaps, if you don't use the load sharing pin and you remove any low side connections to the earth cable / casing on one PSU. Let me know if it works and we can go for 50V for LDMOS Would be a cheap unit but you might want 8 of them to run any bigger ldmos amps. if you could put 4 in series will we still be limited to around 1200W but at 48V or a bit higher or will we get 4800W @50V?
Some LDMOS are already 1200W so you would want at least 1500W capability I would say. I have a load of old military spec supplies somewhere. Think they might run LDMOS. Anyway I just picked up two of these. What a great deal for 2400W of power.
BBI Thank you for this video.
How many amps DC are these at 14 vdc?
I need to build a 600 amp power supply.
The doobly dooo LOL! Good one Luke...click click
Can’t you add a rheostat or variable potentiometer where you place the resistor for increased voltage allowing for variable voltage adjustment?
You would have to add one for the crowbar circuit also then, and have predetermined marked values on each and set them both before turning on the unit
Probably better to use 2 variable position switches with resistors wired in, for each voltage value desired
@@Tomahawk-415 ya I forgot about the crowbar, I’m thinking a duel faker 4 position switch with the required resistors for both the vdc and crowbar circuit. Example position 1 would be 12vdc position 2, 13.8 vdc and so on. Would just take some fooling around with resistors.
@@HAUNTED-HAMDid you do it? If so, please share the results.
Thank you
10 on the way ...should be fun build
what do you think about adding supper capacitors to these power supplies?
Where do u put the crow bar resistor
Great videos. Clicked on your link for the EBAY seller and seems link is no good. Any chance of posting the sellers store link? Very interested in getting started. Thanks. EDIT: Found him but no units listed. Is there a difference between the units with the blue plug receptacle and the black one other than color? A few on line have made reference to this although I see no difference. Thanks
Is it enough to replace the 16V capacitors to make it 19V, or what else needs to be changed?
What an Great person doing a great work. I actually Bought 3 of these same models for an mod which only some chosen ones decided to do. I want to apply 240 Volt Dc from solar and use this to charge my 12v battery bank. Unfortunately this does not turn on 240 to 200 volt DC and It turned on instantly with 240volt Ac. I tried so much to mod it and read online articles so much but this model is not turning on high dc voltage. My other smaller switching power supplies of 5amps have no problem running on 240 to 200 volt dc but this model i want to run is not turning on. Please help me if you can in any way it will be much appreciated. I want to use this as an mppt from solar.
Couldn't you tie into those same solder points and extend a 20K or 25K variable to the outside?
The link it’s not there any more is there another we can buy with the same price ?
Good Morning Fellow BBI FANS & FRIENDS: MR. LUKE I believe you have opened up a new world to those searching for a switching power supply alternative that delivers heavier current
output with just a little love & affection. Thank you for another informative video, God Bless, TMP, Unit 22, from N.J.😊😊😊
Not sure if you read comments from a 9 month old video, but have you tried testing the HP 1500w supplies of the same chassis, yellow label?
Awesome instructions 😎
😂 It’s hard dealing with folks who don’t listen the first time lol
Built one of these a year ago or so. Still running like a top every day.
Hello sir , great info , I build 18650 charging boards and I’ve been trying to find a mod just like this … for ever 4 packs of 4 batteries I need to add a PS thank you 🙏 sir
Make sure to check out both videos that way you understand how to change the voltage properly
Where do you get these at now? Can't find them anymore
Try this part number 643956-101, then read label to verify correct.
3:57 There are many, many people out there (actually an incredible huge amount) that doesn't want to do a god dam shit by them self but want everyone else do it for them for free so I was not chocked at all. "Why should I look at the video at all when I can just ask him, you do the work for me! I don't give a shit just do it because I tell you to!" That is the average Joe on UA-cam.
hello Mr bbi. I have one question . I have a 2x8 . why is my swr high on output. swr changes with power output the lower the dead key the high the swr . and when I modulate it swings backwards? I don't think it has anything to do with my coax ro antenna . because when I run my 2x4 the swr is fine . can I get your opinion on this matter please.
thank you . Mr bbi.
I have the 100 amp versions PD19's i've tried others but they give off noise interference. These dont they operate really quiet too.
The caps are rated at 16v in these.
How long do you suspect they will last being used and at almost 100% max rating?
Forever and ever and ever
On a serious note that's a very good question thank God I'm not one hundred percent I'm at like 95.5%
@Mr BBI actually they are almost at 100%. The idle voltage is 15.9v on your supply, and the max is 16v on Caps.
Easy math.., dunno where you got the 95.5% because that's wrong, it's actually 99.9%, to be exact, not including inefficiencies.
15.9v X 99.99999% = 15.89999841v
The usual tolerance is 10%, but remember these are used, and probably have a billion hours on em. Caps are cheap, I'd replace em with a higher voltage rating, especially pushing them to the voltage limit.
It's not any different than rebuilding an engine and putting USED crank bearings back in. If 1 Cap shorts from running to hard ( and WE both know eventually they will), the entire supply goes dead. Food fer thought:)
I bought one.. now I'm thinking about getting a second one.
Great video I have gotten other models before i seen your video they seem ok. I have not done any voltage increase mods yet just getting started. There fb 1A pd-19 same turn on way .I also got a Samsung power supply for 9.00 tried it same way just about to turn it on pin 1and5 have not seen any mods for them yet. We shall see it's on back burner I'm a hobbyist not nearly in you're field I am only as smart as you tube lol. I have been in dc fork lift repair before i retired have some experience. So in closing thanks for you're video's.
Hi. Can I modi DPS-1200fb same as you modi on 1200sb?
I ran a loop on pin 1 and 4 and the led lights up but no 12vdc and the fan runs slow! No mods done yet just out the box!
Then you're the only one that's had a failure so far out of 6,000 units. Contact hopping around he'll replace it
@Mr BBI I am in the UK, different supplier but I found out the problem! My multimeter probe was faulty! So I have 15k on the variable and 51k on the chip and I am seeing 14.5vdc working perfectly!🤗 thanks for all your help on this project bro! All the videos and the chat in the group have been super helpful!🤗👍🏼 052 in Scotland waving a hand!👋🏴👍🏼
Hey Mr BBI. Have you thought about drilling holes through the board where the positive and negative strips are. That would allow for 100% wire attachment for those that don’t have big high watt soldering irons.
I’ve modified a couple different power supplies over the years. This by far seems to be the easiest. I ordered to and should be here this weekend.
Thanks for the info. I love watching your videos
I've seen a couple people mount lugs of different kinds by drilling through the strips. I'm hesitant to try it but with the PSU's being so cheap I might give it a shot. Would make my 4mm binding post/banana jacks much more secure because currently I'm soldering them which is secure but takes a lot of solder and isn't the cleanest looking. Just gotta make sure you use high quality solder. I use MG Chemicals 63/37
Got a 460w one from a friend. It has binding posts mounted in holes drilled THROUGH the board. Works a charm and does NOT wobble at all!
Done it a few times. Line your hole up good and you be fine.
I just ordered 3 of them . Now i just have to watch the mod vid to get the voltage
Could you take 4 of these ran in series and run Mudduck Sharky's ldmos amplifier?
Have not tested that yet
Would be a great video
What type of 12 volts 300 ampere power supply is best between :- SMPS, EI Transformer & Torodial Transformers for playing one 12 inch, 2,000 watts rms sub-woofer through one 3,500 watts rms mono car amplifier at home ? Plz suggest
Stellar as usual
Can't learn much by skipping through a video. Personally I value the knowledge you share with us and waste your efforts by skipping through your videos.
Can you show the mod for THE DPS-750RB MOD.TO 13.8 OR 14.6 PLEASE ?
I assume hoppin around got cleaned out after this video lol? Can’t find him!
just search his name on google, he changed it! ---> the farm 148
I know you can stack them in parallel, can you chain them in a series?
In most of these supplies the mains ground is connected to the output ground, so series connection requires modification. Also put a serious diode in parallel with each supply to prevent backfeeding power if one switches off.
I'm not a box builder or run any stuff anymore but I'm still thinking of picking a few of these up. I mean 100amps for 20-ish bucks is ridiculous. I payed like 300 for 70 amps when I bought an Astron back in the day. How could anyone pass on this? lol
Hey BBI you explained it so well “even a caveman can do it”……….Kg9ge ……..
lol
Thank You
Good info ,, thanks 👍
the link doesnt work any more
Wow... This little unit is a game changer for everybody who loves tinkering.
Thank you 👍. I'm going to try one with my TS 480 HX Kenwood HF transceiver. Just about all of the switching power supply's I have tried are noisy on 40 and 80 meters, kinda annoying. This is a whole lot more cost effective than a 70 amp astron transformer power supply. Not to mention weight. Thanks and 73 GOD bless Earnest K5EWM 👍.
Can't find the seller. He may be gone.
Sold out
@@BoxBuilderIdahoyou flexed and made that guy some money 😂
Seems like the DPS 1200 sba are all gone. But plenty of DPS 1200 FB-1 models. Anyone know if they will work?
Heather work exactly the same the difference is the mod on the inside of the power supply.. it requires a different set of resistors in a different set of locations. All that information is out there you just have to go find it
I have a delta dps-500gb h and I’ve been hunting for a while how to do this mod to it and I can find nothing🤦🏻♂️ any help would so greatly be appreciated. I am kinda out of options lol
I picked one of these up and it doesn't have an on off switch.
Yes because you have to add it...
Watch the 2 videos on these power modules ,it really helped me understand everything I needed to do before using
73s good luck with your project
I know! I'm just fucking with ya! I absolutely love your videos! I take electric stuff people toss in the trash and I have a ton of server PSUs! I'm currently going through them to see how many can do the same things!
Love ya brother
Well since no one’s going to ask, I guess I will. Hey Luke, can you please tell us the value of the resistor you used?
If anyone has a source for the breakout board for this particular PS please advise.
The breakout board is meh unless you like the connectors they are using and aren't in need of any high amperage lines.
👍✌
anybody find a data sheet or schematic on this little beauty?
Yep google it. Or Reddit
I think over the next 3 months. I’m going to reverse engineer that, and play with the schematics a little bit. 😈 just as a side project to screw around a little lol.
I found some of these server power supplied on clearance. 12V 62.5A (750w) for $5 each. Shipping will be killing
I got the dos 1200 fb
Stuck with fb s
So first you need to solder a diode wire to the circuit board then you need a switch soldered in to power it then you need to solder a wire in for current sharing and you still need a 110 plug in and these are 69$ to 144$ right now yeah lots easier BBI.
I took a chance & ordered 6 of them. Gonna build a power supply and I wanna do a rack mount supply to slide in the rack I’m building that will hold 3 of my most frequently ran mobiles,Johnson 223 & Galaxy Meleka.
hi bbibeauteful vide server suply have a lot o futurs votage control fan speed curent sering up to 4 units i think stability no noiz on cables they also hav a pin power ok i usualy put a led ther indikates separatly 13.8 is working i ben using a dps 800gb model a small coper bord wit extra caps and adorson powe poles istant 72 amps at 13.8v
There's a cheaper price on eBay, paid $15 for my PSU same model number
Can you give me the link? All I see are around $40 shipped
I tried to give you a thumbs-up but it wouldn't work and wouldn't even register
Dps 1200 sba
Oh yea....
Aw, found it....... watching..... found refurb for cheap....
Has me thinking better buy some of these before "_____" starts making fake ones or they start putting new labels on junk ones. side note: 1875 sold on his page.
There are actually many more server supplies from HP and Dell that can be modded in a similar way with slightly different pinouts, and layouts. It just so happens that he has one of the only videos that go into enough detail of this particular part number. Doubt China will notice. Dell makes a 3000w unit that is only about 1.5x's this size. HP makes a 1500w unit with yellow label the SAME size.
Oh man. Luke my Brother, you're a technician if I'm one and I'm pretty sure I'm one. FWIW, over 60% of the guys who made the Apollo project a success didn't have "Degrees" A self made man is damn hard to stop!
These plus are completely idiot proof.. You can stuck a screwdriver in them any where a ytime and after the "Splat-bang" its a really simple matter to scrap it for spares and buy another. When that goes the same way ? - why you have all those spares just connect pin 1 to pin 4 ffksk ! What could be simpler ?😂
Зря потраченное время на просмотр.и нет ничего полезного.
.thank you for this helpfull info. Im from Holland, soo my question about this amazing model is, do this only 110 Volt, or is it switchable to 220 Volt ? And how much do i need to start my 1000 Watt Airconditioner..thank in advance..have a good day~♧~
to bad the ones that are link on ebay are sold as used