AWS DATASYNC | On-premises to AWS | Agent Setup | Transfer Data to S3

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 35

  • @venkatb-h6d
    @venkatb-h6d 9 місяців тому +1

    Awesome, thank you so much for making valuable stuff for different approaches.

  • @liv2rule
    @liv2rule 5 місяців тому +2

    Very informative. Thanks for sharing. I have question regarding datasync agent and data transfers. If I have multiple data streams to be transfered over to AWS, Can I get these data transfers to run in parallel without wait time independently. Can single datasync agent suffice for this purpose? If yes, can you please explain how this would work.

    • @JasCloudTech
      @JasCloudTech  5 місяців тому

      @liv2rule … single agent not possible… there will be wait time …
      There are 2 scenarios having multiple agents and narrowing down the data transfer scope
      For detailed info please check the link below
      aws.amazon.com/es/blogs/storage/how-to-accelerate-your-data-transfers-with-aws-datasync-scale-out-architectures/
      I hope it will answer all your queries…
      Thanks for watching 😊

  • @pavanjoshi1
    @pavanjoshi1 2 місяці тому +2

    I can't see any activity in the datasync console but the transfer was complete. Is there any command we need to run in order to see the output of transfer in the cosole. like in 12:27

    • @JasCloudTech
      @JasCloudTech  2 місяці тому +1

      Ok .. you can check datasync-agent.log file on agent but I got you .. you want on the agent console to show all the details.. but it only shows performance, connectivity or failures..

    • @pavanjoshi1
      @pavanjoshi1 2 місяці тому +1

      @@JasCloudTech Thank you

  • @sumanthbonam7279
    @sumanthbonam7279 Рік тому +2

    What is bandwidth that you have in your local when you transfer 2TB of data..
    I have 5TB of data and i am using direct connect from on prem n/w to aws vpc which is having low bandwidth will this approach effects other workloads which i have on aws

    • @JasCloudTech
      @JasCloudTech  Рік тому +1

      @sumanth to control the amount of network bandwidth that AWS DataSync will use we can configure the built-in bandwidth throttle. increase or decrease this limit while your data transfer task is running. This will minimize impact on other applications.. 🙏

  • @ssureshkumar9963
    @ssureshkumar9963 11 місяців тому +1

    Nice video....is it continously sync mode. Or we can exit the task once it completes the transfer.

    • @JasCloudTech
      @JasCloudTech  11 місяців тому

      @ssureshkumar you can configure task scheduling hourly weekly … only changes to data will be copied…..🙏😊

  • @kiran.karande
    @kiran.karande 5 місяців тому +1

    Hi JasCloudTech,
    I wanted to check if can we upload data directly to s3 Glacier.
    Also whether the AWS DataSync service is also available in Hyd region ?

    • @JasCloudTech
      @JasCloudTech  5 місяців тому

      @Kiran yes that’s possible and AWS DataSync is available In HYD region 😊

  • @amitagarwal2
    @amitagarwal2 Рік тому +1

    Does the agent need to be manually upgraded or does AWS take care of that?

    • @JasCloudTech
      @JasCloudTech  Рік тому

      @amit AWS automatically updates your agent's software, including the underlying operating system 😁

  • @Olegunnarso
    @Olegunnarso 10 місяців тому +1

    great video! Can we do this same but with MySQL database, to transfer data from phpmyadmin to aws?

    • @JasCloudTech
      @JasCloudTech  10 місяців тому

      @olegunnarso … you mean backup … aws Datasync support shared file system /object storage …

    • @Olegunnarso
      @Olegunnarso 10 місяців тому

      here is the task I wanna solve:
      Right now, I have some CSV files containing oil price data from 5 years. I wanna make some database on my computer and transfer that data to AWS, because I will need it for calculations later. and I will later do some calculations with that data and real-time data of oil prices, which I would pull using API from third party apps/webpages containing oil prices.
      How would you approach that problem?
      @@JasCloudTech

  • @subhasishghosh22
    @subhasishghosh22 6 місяців тому +2

    i am using vmware 17.5 version. After creating the agent, VMware automatically restarts. any solution ??

    • @JasCloudTech
      @JasCloudTech  6 місяців тому

      @subhasishghosh check for resources cpu memory allocation … check vm logs ,, check for hyper v or any subsystem that might be conflicting I hope this will give you exact reason… 😊

  • @AntaryamiSanchari
    @AntaryamiSanchari Рік тому +1

    does datasync support On-premises MongoDB as Source?

    • @JasCloudTech
      @JasCloudTech  Рік тому

      @antaryamisanchari .. you can create a trigger in MongoDB to copy MongoDB data to S3 ..

  • @somethinghere2
    @somethinghere2 7 місяців тому +1

    i have problem of Automatically get the activation key from your agent,but can not activation key (agent by vmware esxi).

    • @JasCloudTech
      @JasCloudTech  7 місяців тому

      @matchnsp please check VMware configuration network settings outbound internet connectivity… if possible you can share screenshot in order to know the issue more specifically

  • @yogeshjs
    @yogeshjs 10 місяців тому

    I provision one windows rdp server as an on prem and then download the agent and install the vmware workspace after attached agent but when i play the this i got an error box like remove the hyper-v from the system before running vmware workstation.

    • @yogeshjs
      @yogeshjs 10 місяців тому

      When i check hyper v its already disable on my rdp kindly help me here

    • @JasCloudTech
      @JasCloudTech  10 місяців тому

      Ok … in this case try
      Get-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-All
      Its should return state disabled
      Removing
      Uninstall-WindowsFeature -Name Hyper-V -Restart
      If issue persists let me know …

  • @honestlyspeaking3556
    @honestlyspeaking3556 Рік тому +1

    Where did you get the key, who will tell that, half info given

    • @JasCloudTech
      @JasCloudTech  Рік тому

      As I mentioned I had already setup the agent .. after setting up the agent in VMware .. login to agent console the very first thing you will see aws datasync activation menu …. Press 0 to get activation key … I hope now info is complete… thanks for watching. 🙏

    • @raviteja8230
      @raviteja8230 Рік тому

      @@JasCloudTech Hi Sir, to login into the console, I have used username as "admin" and password as "password" but it was throwing Invalid login error. I even tried giving password as "admin" but it didn't work either. Can you help me?

    • @JasCloudTech
      @JasCloudTech  Рік тому

      @@raviteja8230 may I know where you have deployed your agent…

  • @saklenshikalgar4564
    @saklenshikalgar4564 Рік тому +1

    hello sir,
    i have one small project problem i am trying to solve it but not able to do this because of some mistakes please can you help me to solve it

    • @JasCloudTech
      @JasCloudTech  Рік тому

      @saklenshikalgar ok sure … you can share details on my email Jaspalsaini45@gmail.com

    • @saklenshikalgar4564
      @saklenshikalgar4564 Рік тому +1

      I have sent email have you seen ??

    • @JasCloudTech
      @JasCloudTech  Рік тому +1

      @@saklenshikalgar4564 yes I have gone through it .. I will send you details with steps max by tomorrow…