How to disassemble 📱 Sony Xperia Z3 Tablet Compact (SGP621)
Вставка
- Опубліковано 13 вер 2024
- Instructions with a detailed description and additional materials on our website, follow the link. vrm24.com/inst...
Reviews with specifications, photos of printed circuit boards and parts. vrm24.com/revi...
If you have additional questions, you can ask our specialists who will try to answer them in as much detail as possible. vrm24.com/ques...
Our manual is suitable for all Sony Xperia Z3 Tablet Compact (SGP621) models - released for the markets of different countries.
The VRM24.COM channel is dedicated to disassembling and repairing phones, tablets, smartwatches, and other mobile devices.
We provide an opinion on this channel, look inside the top brand devices, and reply to frequently asked questions. So, start in now -
watch this video and ask a question. You are welcome here!
Also, check the VRM24.COM website, where you will find repair instructions, pictures of motherboards, sub-boards, and electronic components - vrm24.com/.
Facebook: / vrm24com
Instagram: / vrm24com_official
This channel: / @vrm24com
Наш на RUSском канал: / @vrm24ru
Support Us: / vrm24com
Warning
This content is intended to be used for informational and entertainment purposes only.
You are using this video direction and this content at your own risk.
Following these directions in this video will void your warranty. You are performing this repair at your own risk.
#vrm24com #SonyXperiaZ3TabletCompact #SonyXperia
Successfully replaced my battery thanks to this vid, really helpful thanks for sharing.
A couple things to watch for while changing the battery:
1. The thin hard plastic (from blister pack) should not go farther than ⅜" inside. If you cut the corners the screen can be separated from the digitizer. Heat and pressure likely won't get it all back.
2. I only had to disconnect the narrow ribbon cable across the battery to ease it out after peeling off the tapes. There's sticky stuff holding the battery to the back of the case that will release with gentle prying.
3. The narrow ribbon cable wouldn't completely connect with the new battery in place because of the curve that bedded in over the years. It has to connected with the battery out. Then the new battery has to be delicately slid in under it while dealing with the sticky case back.
4. The screen ribbon cable has a narrow end that really looks like it should be plugged in somewhere. It just lays over the narrow white tape.
I still need to clean up the old glue before putting in double sided adhesive.
The tablet is now good for several hours between charges.
I've done a number of hardware replacements on Nexus 7 2013 and 5. The glue on the Sony adds considerable difficulty. That said, screen replacement doesn't require pulling out a whole bunch of components like the aforementioned Nexus devices.
used this video to help me replace my battery, thankyou! however there's one thing i would do differently. the black plastic cover at 8:38 for the display and power flex cable, instead of yanking/prying it off, i would use the tweezers to unhook the tab to the metal clip holders. you can grab the top or bottom bit of the plastic cover with tweezers to gently unhook the plastic cover off. i yanked mine off like in this video and i ended up breaking one of the metal clip holders from excessive force.
Thank you for making this video
My pleasure! ) Do our best!
Спасибо! Видео очень помогло при замене АКБ.
Vielen Dank, das Video hat mir super geholfen....
مرحبا شكرا لكم.
كيف يتم اعادة الفلاتة الى موضعها في مفتاح التشغيل.
can the magnetic charging port replaced with the xperia 3 or z2 one ? part 1281-9655
Hello, i would like to ask you, if its possible to open tablet also from back. I have to change loosen charging port and i dont wanna do this trough the diplay. Also it will be rly helpfull if you can send me link for a charging port part (aliexpress will be great). Thank you in advance. I´m not sure which one is the right one. I papreciate your effort you put into your videos.
Hi, man! The charging connector is soldered to the motherboard and in any case, disassembly is needed.
In addition, you will need a soldering station and certain skills to work with it.
The easiest option is to use the second western port, which is for the docking station, buy either a magnetic adapter or a docking station.
The adapter is called RDL to micro usb
Je souhaiterai savoir où je peux obtenir un cache qui pourrait couvrir l'emplacement de la carte sim. Car j'ai perdu celui à l'opposé.
merci !
В городе ни один из сервисов не взялся менять батарею. Сказали, что вероятность испортить матрицу (очень хрупкая) не менее 50% - никто не дает гарантии. что не сломается во время ремонта.
Два раза уже сам поменял.
@@user-rc151 добрый день. У меня планшет полгода как перестал включаться даже от сети. Это может быть связано с аккумулятором? В город е нет квалиф. сервисного центра Сони, и аккумуляторов в продаже.
Hi, my battery on my Z3 tablet is bulging and pushing the glass up. Is it safe to replace it?
Hello, If you do everything carefully, in proper order, do not overheat the battery, and do not damage its shell, there should be no problems replacing it.
Is the glue still able to hold the display after I removed it for battery replacement? Or do I need to renew the glue?
Hi, it is better to do that, use a sealant (we use B5000 or B7000).
For a battery adhesive tape, for display or back cover a sealant.
@@Vrm24com Thanks for the quick and detailed response. I presume any household double-sided adhesive tape will do?
@@Avrunath Yeah, I guess, but I would recommend you a brand - 3M (3m.com).
@@Vrm24com Thank you!
Can the battery be removed without taking all the other components out?
Hi, first, you should separate the display, and you can try. Why try? Sometimes the battery is glued hard and you need to remove the PCB. Getting more space giving you more opportunities and you can make the separation without PCB damage.
you need to work with ifixit :D
Hi, Someday :)
I got it. I think they can use our video, just should pay for a temporary license or slice % of advertising.
I notice the transparent plastic thing used to pry the screen is especially soft. Is that strong enough to remove the glue?
Hi, it's a plastic protective layer of the new display. It's strong enough to separate, at the same time, soft and can't the cause of damage.
а при сборке чем экран с крышкой склеивать?
Скотч 3м
@@palmist73 фигурно тонко резать двухсторонний скотч?
B7000 клей,скотч хуево держит.
@@babooncrazy3717 на него в итоге и склеил, держится хорошо
@@cahekc так герметичность нарушается. Клею на В7000
can you show how to replace battery?
Hi, after the disassembly as in this video ua-cam.com/video/I5aWVCe3nDo/v-deo.html
Hi Da sheng! I need the video about replaceing z3 tc
battery .
That's quite easy, sand down a corner and one edge of an old credit/loyalty card, remove the terminals and black tape that's attached to the battery. Then carefully slide the credit card under the battery, slowly wiggling it to and fro, lifting gently, the battery will gradually pull away from the adhesive strips. Go slowly, no heat needed, just careful movements keeping the card flat to the underside of the battery. It will slowly peel away when you have gone through all the adhesive. I replaced one only this morning, that took only 15 minutes. DO NOT PUNCTURE THE BATTERY AND USE NO FORCE!
Zurkster when you replace, do you sctoch it back ? Or it' s not necessary ?
And how fix the glue on the screen to seal it ?
@@taoh3473 Depends if you want to maintain the water/dust tight seal, you can buy the glue strips for your device on eBay quite cheaply. The strips are supplied on a backing sheet, you align the backing sheet with the screen and apply it.
При падении экран отлетел от корпуса. При подключении обратно, сначала экран показывал, но не реагировал на касания, потом экран вовсе перестал показывать. Сам планшет работает, определяется компьютером при подсоединении проводом и тд. звук есть, а экран черный при этом. Стоит ли менять весь дисплейный модуль?
Здравствуйте, часто у этой модели бывает, что сгорает подсветка, нужно на рабочем устройстве подключить этот дисплей.
ЗДРАСТВУЙТЕ!УРОНИЛ ТАКОЙЖЕ ПЛАНШЕТ И ТРЕСНУЛ ДИСПЛЕЙ ВСЁ РАБОТАЕТ НИЧЕГО НЕ ПОТЕМНЕЛО И НИКАКИХПОЛОС НА ЭКРАНЕ НЕТ ПРОСТО НАПРЯГАЕТ ПАУТИНА И ХОЧУ САМ ОТРЕМОНТИРОВАТЬ,ПОДСКАЖИТЕ ПОЖАЛУЙСТА МНЕ ЗАКАЗЫВАТЬ ЭКРАН ИЛИ ТАЧСКРИН?
Здравствуйте, проще во много раз, будет заменить дисплейный модуль. Для замены сенсора нужен большой опыт набор инструментов и желательно - специальное оборудование.
@@Vrm24com СПАСИБО ЗА ОТВЕТ!