I just ordered these two packages right from your link. Can't wait to fit them on my FZ6 -04! Also hope that I can sell the extra two bulbs :) Thanks for the video, will probably see it a few more times during the installation.
The Inja It sure is! Just installed them and they work fine! Bright as hell! Easy installation, except for that my bike had H4 connections on both sides. Pretty weird, but I solved it :) Thanks again!
Just upgraded my FJR1300 to the Mictuning LEDs you bought (mine needed 2 H4's).... I'm dying to take it out tonight, it's making me crazy to wait... what did you think of the difference in night riding? I left the dustproof boots off of mine (just in case I dont like them I could send them back (Thank you Amazon!). Like the install, thank you!
Jason Thompson for sure! night riding is AWESOME with the LEDs. Such a difference. Just make sure you don't get too much dirt inside the lights without the cover. Glad I could help!
The link to the H7 bulbs shows products that are discontinued. I purchased 2 or 3 H7 LED bulbs now and the connector is too narrow in width to fit the factory harness. Any ideas?
how is the light output? im on the verge of buying an 2008 fz6 and the one i test rode yesterday had a the hid headlight pointing toward the floor. my 2007 ninja 250 points ahead of you and not at the floor. you think its a flaw in the bike?? the fz6 was previously dropped on left side...
Hey, i have a 2008 fz6 and I was looking at doing this upgrade, i was wondering why you need both the h4 and the h7? also if you still have them id be interested in them
Hey, man! Totally didn't even see your comment until now. Yep, still have them! The FZ6 uses one H7 and one H4. One for high beam one for low beam. Go ahead and message me from the About section of my channel if you still need them!
Do you still have that set that you're trying to get rid of by any chance? I wear snapbacks, have the same fitbit as you, and ride a 2007 blue fz6 as well, if your name is Connor....we would be the same person lol
I’m currently putting these on right now. Followed the link to the Amazon listing for these. The H7 two prong connector is too small for the receiver on the harness. Did you have that problem? Might have to use the voltage regulator from the H4 box. Seems to work, not sure if that will have any problems later. Just wondering!
The Inja thanks for the reply man, I just used the other adapter like I said. Seems to be fine. Held up under my ride from work so I’m sure it’ll be ok. By the way, is yours lowered? I don’t recall if you mentioned it from the supersport conversion video.
Hey brotha, do you know if the Led kit will work with the dual headlight mod? Proper dual headlight mod that is where the low beam on the h7 disables when you enable the hi beam on the h7.
Zack Cook I don't know. never tried it! If I had to guess, I would assume that mod would work with any headlights: it's just different wiring to the switch.
When I put the LED H7 bulb in the left side the factory metal clip wouldn’t hold it in place. The bulb just moves around and is not secure. I clicked on the links you have but they both are for H4 bulbs not the H7. What do you recommend?
I have a question regarding the Fz6 2009 ! If i have a full fairing on my Yamaha fz6 can i put a frame slider ? as per many picture it doesn't look like because the fairing hide the whole. (My bike is in a garage so i cannot see by my self !)
alexandre dubois you can, but you need to get the extended sliders (really long ones haha) and you'll need to drill a hole in the fairings for them to go through.
I like very videos you made regarding your Bike and your Bike is awesomeeeeee :D Last question hahaha I have an exhaust Leo vince SBK evo 2 and i bought this bike with this exhaust and humm my end caps very suck it look like a toyota echo I would like to buy a end caps black .Do you know if there is any place i can buy this part ? As per the technical support of leo vince they don't have any end caps for my exhaust because its oval but im pretty sure I can buy something to replace this end caps...
Dislike cause of title, made it seem as if you were going to discuss the 3 instead you just swapped from one light to your led and end of video
CAPTAiN JAC thanks for the dislike!
CAPTAiN JAC thanks for the heads up
I have a LED headlight too and it is aweome! Easier to install than HID and they don't have a warm up time. Good choice :)
jayfiver rides Thanks, man! i love them. Great upgrade for not too much!
I just ordered these two packages right from your link. Can't wait to fit them on my FZ6 -04! Also hope that I can sell the extra two bulbs :) Thanks for the video, will probably see it a few more times during the installation.
That's awesome! Glad I could help you out.
Currently enjoying the day out on my FZ6!
The Inja It sure is! Just installed them and they work fine! Bright as hell! Easy installation, except for that my bike had H4 connections on both sides. Pretty weird, but I solved it :) Thanks again!
Jonas Kruse that's sick!! Good for you, man! And maybe the FZ6 S2 is different than other models with the connections...but glad you figured it out!
Just upgraded my FJR1300 to the Mictuning LEDs you bought (mine needed 2 H4's).... I'm dying to take it out tonight, it's making me crazy to wait... what did you think of the difference in night riding?
I left the dustproof boots off of mine (just in case I dont like them I could send them back (Thank you Amazon!).
Like the install, thank you!
Jason Thompson for sure! night riding is AWESOME with the LEDs. Such a difference. Just make sure you don't get too much dirt inside the lights without the cover. Glad I could help!
Running LED bulbs in my car and truck. Bike is still rocking old school Halogen though!
Coming out to the meetup tmw?
Mk2Mike I can't 😔 I'll be at a wedding. So sad I can't join you all!
The link to the H7 bulbs shows products that are discontinued. I purchased 2 or 3 H7 LED bulbs now and the connector is too narrow in width to fit the factory harness. Any ideas?
If I remember correctly, there is an adapter on the stock bulbs that needs to be taken off and put on the new H7.
how is the light output? im on the verge of buying an 2008 fz6 and the one i test rode yesterday had a the hid headlight pointing toward the floor. my 2007 ninja 250 points ahead of you and not at the floor. you think its a flaw in the bike?? the fz6 was previously dropped on left side...
Yeah, headlights are supposed to point light forward. haha
The LED lights are very very bright. You definitely will not be disappointed.
Wud that rubber seal not melt with led bulb heat
are your led headlights still holding up?
Marc Kevin Castro yep!! just like the day I put them on. great lights!
Im interested in the other set of bulbs if ya still have them
Sold!
Hey, i have a 2008 fz6 and I was looking at doing this upgrade, i was wondering why you need both the h4 and the h7? also if you still have them id be interested in them
Hey, man! Totally didn't even see your comment until now. Yep, still have them! The FZ6 uses one H7 and one H4. One for high beam one for low beam. Go ahead and message me from the About section of my channel if you still need them!
Do you still have that set that you're trying to get rid of by any chance? I wear snapbacks, have the same fitbit as you, and ride a 2007 blue fz6 as well, if your name is Connor....we would be the same person lol
ReacT Eclipse hahaha 😂 that's hilarious.
Unfortunately, they are sold!
Oh hey got my stuff coming in this week, if I have any problems can I come to You?
sorry have to specify, the skeleton case, mic adapter and mic.
Yeah, for sure! just let me know and I'll help you out.
What kind of mirrors are those
do you have a problem with the left side just shooting light everywhere?
Nib-Na5ty nope, it works great!
weird my high beam has a nice even line but my normal just shoots light everywhere
Hmmmm..not sure, maybe the low isn't adjusted right? Or, if you're using LED lights the bulb isn't sitting right.
I’m currently putting these on right now. Followed the link to the Amazon listing for these. The H7 two prong connector is too small for the receiver on the harness. Did you have that problem? Might have to use the voltage regulator from the H4 box. Seems to work, not sure if that will have any problems later. Just wondering!
Kenneth Skinner yeah, one of them had an adapter on it for the H4, if I remember correctly.
The Inja thanks for the reply man, I just used the other adapter like I said. Seems to be fine. Held up under my ride from work so I’m sure it’ll be ok. By the way, is yours lowered? I don’t recall if you mentioned it from the supersport conversion video.
nope, not lowered. I was considering it for a while but decided to leave it. Already too tall for the bike haha
So I also have to use the adapter from the H4, however I get light but the fan doesn't come on?
@@rkvantiflin hmm...might have a faulty fan.
Hey brotha, do you know if the Led kit will work with the dual headlight mod? Proper dual headlight mod that is where the low beam on the h7 disables when you enable the hi beam on the h7.
Zack Cook I don't know. never tried it! If I had to guess, I would assume that mod would work with any headlights: it's just different wiring to the switch.
What year is your R6 though? My 04 R6 takes two (2) H7....
It's an '07 FZ6 (yes, R6 engine)
Whats the brand? Links broken
feels bad because I sent an email to their customer service and they don't sell single bulb anymore :/
Oh huh. Guess you just have to buy both like I did. Thanks for letting me know!
Yes that's what I did !
I hope you love them! Always feel free to send me some photos of the before and after on the facebook page. I love seeing all your bikes!
I know this was a while back but have to ask, Opinions on the handlebar setup?
I personally really like it.
What bars?
@@phillipalexander5305 oh I just assumed you meant the one in this video. This is still my setup and I love it.
The Inja which bar did you go with? I’m curious about changing mine but I ride multiple hours at a time. 🤷🏼♂️
@@phillipalexander5305 TC Bros amzn.to/2fbknr2
I can’t get the h7 led low beam bulb to stay in place do I need a spacer?
Not sure what the situation is, but if it doesn't fit, you might need to figure something out to hold it in place.
When I put the LED H7 bulb in the left side the factory metal clip wouldn’t hold it in place. The bulb just moves around and is not secure. I clicked on the links you have but they both are for H4 bulbs not the H7. What do you recommend?
@@jake2772 it was a similar situation on mine. I got the clip to seat it pretty decently then added the rubber boots back on to hold it even better.
@@jake2772 @2:15
See that little white piece at 2:15 did that come with your bulb? Is that the piece u take off first and put in place then twist the bulb Into?
How did you get the retainer clip around the fan??
Bobby Henry Just had to force it a bit. Haha
the bulb comes out read the directions
do you still have extra set of bulbs i messaged you on fb
michael fannin they are sold.
I have a question regarding the Fz6 2009 ! If i have a full fairing on my Yamaha fz6 can i put a frame slider ? as per many picture it doesn't look like because the fairing hide the whole. (My bike is in a garage so i cannot see by my self !)
alexandre dubois you can, but you need to get the extended sliders (really long ones haha) and you'll need to drill a hole in the fairings for them to go through.
Oh lord never i will do that hahaha ! Thanks for your answer !
alexandre dubois for sure my man
I like very videos you made regarding your Bike and your Bike is awesomeeeeee :D Last question hahaha I have an exhaust Leo vince SBK evo 2 and i bought this bike with this exhaust and humm my end caps very suck it look like a toyota echo I would like to buy a end caps black .Do you know if there is any place i can buy this part ? As per the technical support of leo vince they don't have any end caps for my exhaust because its oval but im pretty sure I can buy something to replace this end caps...
Oh snap! Nope, I can't help with that.
What side does the H7/H4 go on?
Pretty sure H7 is on the left, H4 on the right.
Burning rubber.... Man... ✌
share a parking spot tomorrow? lol
for sure, see you tomorrow!
alright haha, i think i will park towards the baseball diamond
This will get wet ffs