If any of the Q50 fam has a 2018+ there should be a plug off the wiring harness attached to the inside of your grille (It’s there for the factory LED emblem from Infiniti). Match your wires from your aftermarket emblem to the plug (gray is power and black is ground). You’ll save yourself the hassle of running wires and splicing to the headlight wire.
I have a 18 luxe and installed the emblem, but I can't find that plug you're talking about. I also don't have the factory led emblem, just the regular chrome one.
Really helpful video bro, i stay away from wiring because I’m not the best at it. But this video made everything so simple, installed the emblem on my friends car and it looks great bro real helpful video 🔥🔥
You mention something like a needle at the tip of the wire that you would have preferred to use. What is the correct name for said tip/needle, and where can one obtain it?
Nice tutorial! love the end.. "I like it" "thats it...?" lol also where did you get your eyelids from? 3M double sided that down or did you use something else? cheers!
Hey thanks for watching! Eye loss were from eBay I believe. And yes they come with 3m tape on them. I have since removed them and just used vinyl wrap and cut them to the shape I wanted
The emblem is from Jaliscos carbonfiber. They have a website or you can find them on Instagram. The front splitter is from amazon. Every part I have has been documented and is typically linked in the description of the video
Yo bro do you know if the 14-17 would work with a 2020 infinity or is the wiring different. I’m having a hard time finding the light up emblem for my year
Will it be any different for 2017? I see a pack of wire right on the surface of the engine block? Are those head light wires? Or I must remove air box to access the wires?
I’m curious does the Q 50 for the 2015 version does it come already with a wire pre-set or do I have to like manually re-wire to get that emblem to turn on if I were to get it?
Hey I’m not too familiar with electrical stuff, but would a separate fuse be necessary between that pink headlight wire and the LED emblem wire or is there no need for a fuse?
i'm having issues w the light turning on when starting then off, i cleaned the ground point and i have the positive hooked up to pink wire in the video. any ideas on what it could be? debating redoing it and plugging it into my "emblem wires" as i have a 2018
Just want to repeat a comment that I saw here. The 2018+ all come with a plug already. You can find it around the middle of the front bumper. You dont have to remove the bumper to access it. Just kinda feel for a wire up under the front of the hood. Youll feel the plug. Pull on it a little and the tape will come loose. Just peel the tape and plastic back then splice into it. Made the install super easy.
Yo J. You're late. Just kidding. Keep up the good content. I can see you're making it big one day! As for the LED emblem, I have it gloss black too; glowing red. It's bleeding more than a girl's period. But who cares 😂
I have the rgb emblem coming in the mail soon and this install helped out a lot for prepping for my install because after watching the rgb emblem install that you recently made I still had a ton of questions but referring back to this one which was much more thorough I’m pretty prepared. Great video!
Mr. speed I have a question I purchased the OEN led emblem with the plug it comes with dealer assist download instructions pan flit CRAZY complicated process. I also have the DIode always on module. What advise can you provide I ask you because you be all in and outside of your Q in advance I appreciate your assistance
This wouldn't be something that'd come factory direct installed would it? Finally just got my Q50 '18 luxe, with multiple Sport packages and saw the car already has this installed. Just seems odd someone would specifically seek this out, yet not customize anything else... It's sharp looking, but I'm going to either buy an opaquer pen, or see if my local tint guy has one on hand to subdue the light output at night...it's just a bit much for me. As I have the iridium blue color...what are you thoughts on doing this either standard black or possibly a deep blue to compliment the rest of the car? Your thoughts are appreciated. Keep up the good work! Nice ride
I purchased one and, after watching this, I have no confidence in myself in doing this correctly. :/ So it'll end up sitting until I find someone who can install it, lol
Thank you so much for this tutorial!!! I got my LED emblem this monday and i was looking for a good way to do it on my own. The other videos on youtube are .......... uum .... they are sth. ^^
Hey boss I recently put it on my car and it won’t turn on at all or connect to the app did you have any issues with that at all and if so how did you fix it?
@@SpeedCultureStudios yea because I put it on the nuts connected to the battery and it wouldn’t turn on I wired it to my fog lights and it didn’t turn on at all and it was grounded correctly to
@@Landonsprasky so must be defective if you tested it directly to power. Dumb question but have to ask-did you make sure you put the correct wire to + and - ?
@@SpeedCultureStudios yea I did and I used my buddy tool to see if the wires on the led emblem were getting power to them from my battery terminals and they were def a defective led emblem getting a new replacement one soon but I think the led emblem wires werednt connected onto the logo correctly therefore it was faulty
I just got a q50 I wanna get drop in filters what do you recommend I’ve seen K&N filters get dirty I also saw you recommended some dry filters? Not sure what to get for best performance it’s my daily
I don’t have the always on module but I do have the automatic headlights all the time... is there any way to have the emblem turn on with the same wiring because honestly I don’t even touch the light switches since I always have it on automatic mode... so would there be anyway to have it turn on at the same time the headlights turn on whenever it gets darker for the sensors to think it’s night?
@@SpeedCultureStudios not the same one you connected my bad, I meant the one you showed at the end will the emblem turn on when the headlights turn on after it gets to a certain point of darkness outside cause of the automatic headlight mode
I installed everything and it worked fine, I was changing the color and it just turned off and hasn’t turned back on since, I tried deleting the app and downloading it multiple times, I know it’s not a wiring issue. Anyone can help?
Hey speed I installed my carbon fiber led emblem from Jalisco’s CF the install went good, emblem was working for a week and a half until out of no where it just wouldn’t turn on anymore. I followed the steps from this video, I installed and reinstalled numerous times I re grounded with a new wire connector and still nothing. What are your thoughts? Thanks!
@@SpeedCultureStudios yeah I’m convinced it’s the app tbh because I just installed a new emblem yesterday Jaliscos sent me and it still doesn’t work. I mean what are the chances I get two faulty emblems lol ! I’m thinking I’m not splicing the pink and red wires correct but it’s not that hard to do I’m just following the steps on here. Thanks for your reply!
Is there one that has power when parking lights/headlights on, so it comes on when just the parking lights are on as well? DOnt have my voltmeter handy :-|
I'm not sure which wire that is honestly. I didn't test all of them. I didn't think to have it on with just the parking lights because it would likely be daylight and it would be hard to see the led anyway.
Hey bro I’ve had mine for about 3 months now and today it randomly didn’t turn on.Ive checked my fuse and everything, do you think it could just be the emblem itself?
I’ve installed this and my battery kept dying every couple of days on me. So I bought a “gel” battery and two days later it was dead again in the morning. I don’t know what to do. All I have is underglow lights and the emblem. What should I do??? I’m too the point that I’m about to just rip it all off the car. No point in making it look good when I have to ask people to jump me off
Old video so don't know if you'll respond, but that air intake cowl is it flush to the filter piece? Mine is the OEM cowl and there is some space between the insert pieces of the cowl and where my filters are located. I assume it is meant to be flush so no air escapes or is sucked inside.
Thanks. Just got doing this. Couldn't have done it without you. Getting that pink wire spliced was a pain in the ass since I couldn't figure out how to get the headlight harness off. Also, it took me about a half hour to get the airbox back in. But I got it done. Thanks for the help.
How did you get the harness off? I’m having a hard time unplugging it from the headlamp. Hard to see and feel. Not trying to break it. Fingers are sore 😆
Have you faced any complications after installing the illuminated emblem, with removing the bumper? Like do you have to unwire everything now to remove the bumper completely?
Which wire is the DRL for driver’s side headlight? I’m installing the LED emblem i tapped it wit the green wire first but I didn’t have power and now I did. to the pink wire (headlights) and I get the power only when headlights on. I want it on basically wit the DRL and EVERYTIME I lock/unlock the car, which wire should I tap it with?
@@SpeedCultureStudios so i ended up taking out. It’s Just there to hold it in place. No actual bulb. I think the 2018 model might have a different harness cuz I’m not seeing the same things.
Love the way it is a background light and is like a halo around the emblem. Great job!! I dont do IG is there a website or facebook page to contact him?
It’s just you. Check your playback settings. Might be playing back through the ear piece rather than the speaker. Volume is perfect for me at about 30% on mobile and PC
Got that emblem in today. But I'm having an issues if you might be able to help me out. I have installed it and tapped into the R/H headlight wireing harness. I used a quick splice clamp to splice into the main head light. (Pinkish) wire. Everything looks good but now my halo and eyebrow LEDs are coming on? The main and the emblem work. I only tapped that one wire. Any ideas
If any of the Q50 fam has a 2018+ there should be a plug off the wiring harness attached to the inside of your grille (It’s there for the factory LED emblem from Infiniti). Match your wires from your aftermarket emblem to the plug (gray is power and black is ground). You’ll save yourself the hassle of running wires and splicing to the headlight wire.
Great input!
I have a 18 luxe and installed the emblem, but I can't find that plug you're talking about. I also don't have the factory led emblem, just the regular chrome one.
Is the plug on the driver side grill or passenger side? I cannot find it.
It’s most likely taped to the group of wires at the top/middle of the grille
Is there a tutorial for the newer models?
Really helpful video bro, i stay away from wiring because I’m not the best at it. But this video made everything so simple, installed the emblem on my friends car and it looks great bro real helpful video 🔥🔥
Really glad to hear that!
Yes the black emblem with the led looks better than the chrome emblem with led
On this color huh
@@LuisHernandez-re6xc hell yeah.... I want to get this emblem, but sadly im selling my Q
Got mine in yesterday... Looks awesome
Did you ever have troubles with the app? Because I wanna control it through there but for some reason it won’t connect ! But helped a lot thanks !
Sometimes it has trouble connecting. Just uninstall the app and reinstall
what’s the app called for this emblem
Thanks for the east eay u teaching us , I wish u cab install my light in my infiniti qx50.
Hope u can
Can I go tap to the fog lights to power these up? Great vid as always 👍 thanks for posting it
You can!
@@SpeedCultureStudios might go that route instead. Thanks.
@@Voltis-5 totally fine if you want it to come in only when you have fogs on.
Need this for the Q70!!!
I just ordered one for my q70. Same place he got his.
You mention something like a needle at the tip of the wire that you would have preferred to use. What is the correct name for said tip/needle, and where can one obtain it?
They are probably just called pin connectors.
Nice tutorial! love the end.. "I like it" "thats it...?" lol also where did you get your eyelids from? 3M double sided that down or did you use something else? cheers!
Hey thanks for watching! Eye loss were from eBay I believe. And yes they come with 3m tape on them. I have since removed them and just used vinyl wrap and cut them to the shape I wanted
Did you cut the pink wire before u put on the quick splice
No cutting. Just spliced into it
@@SpeedCultureStudios thanks .. just completed my install thanks to this video 🤗
Which size washer did you use for the ground cable ,on the intake box screw?
I’m not sure. Whatever I had in my random hardware bin. Honestly doesn’t really matter-whatever fits.
I def appreciate this video. Saved, liked and subscribed.
I really appreciate that!! Glad it helped’
Can you just wire it to the battery or would it be to much for the emblem?
It would never shut off…
Nice. Who makes this emblem and how much? Also where did you get the lower piece for your front bumper?
The emblem is from Jaliscos carbonfiber. They have a website or you can find them on Instagram. The front splitter is from amazon. Every part I have has been documented and is typically linked in the description of the video
Which emblem is better one with no carbon fiber or one with carbon fiber??
It’s all preference man. I think if I got it again I’d get the one with the carbon background for a little contrast
We Enjoy watching your channel 👌 Great vibes , We definitely support big time 🥂😎
Thanks a lot!
Always support from cre8tive garage
Do these fit G35s
No
Yo bro do you know if the 14-17 would work with a 2020 infinity or is the wiring different. I’m having a hard time finding the light up emblem for my year
Different emblem
I went to get this light from him he said 2018+ did you get it anyway??
He may not have these available
Will it be any different for 2017? I see a pack of wire right on the surface of the engine block? Are those head light wires? Or I must remove air box to access the wires?
No headlight wires above
I’m confused. Is it “no, headlight wires above” meaning they are above or “no headlight wires above “ meaning they are under the air box
What app do you use to control the light?
Can anyone help me figure out after installing my right led blinker won’t work
You must have severed a wire.
Where did you purchase that splitter ? 🤔
Amazon 3 piece for the 2018 non sport. Fits perfect. Check out my splitter video
I’m curious does the Q 50 for the 2015 version does it come already with a wire pre-set or do I have to like manually re-wire to get that emblem to turn on if I were to get it?
The car in the video is a 2015. So same process
Where did you get your led emblem from ?
In the description and in the video a number of times
Can this be used for the back emblem as well ?
It would have to be modified
No lol unless you really wanted to then you could modify it to make it work but it would highkey be ugly
Where did you purchase the emblem?
@jaliscos_carbonfiber on IG-mentioned one the opening 10 seconds of the video
What app and how did you connect it to the app?
Check out my RGB emblem install. This is not color changing so there is no app.
@@SpeedCultureStudios forsure i just checked it out, awesome content!
Can i put this on my q40 ?
I would imagine they are slightly different
U have a link? Looks good💯
No link. Need to check out jaliscos_carbonfiber on IG
Where do you buy this ????
Jaliscos carbon fiber on IG
What about RAYMAX? Are they legit?
I have ray max door lights and they are nice. I haven’t used anything else of theirs
@@SpeedCultureStudios Ok. I think they are located in another country and I just want to make sure they are not scammers.
@@RR-nl2ep it takes a while to get products but they are good
@@SpeedCultureStudios Ok. Thanks!
Hey I’m not too familiar with electrical stuff, but would a separate fuse be necessary between that pink headlight wire and the LED emblem wire or is there no need for a fuse?
No fuse necesary
@@SpeedCultureStudios thanks for the response!
i'm having issues w the light turning on when starting then off, i cleaned the ground point and i have the positive hooked up to pink wire in the video. any ideas on what it could be? debating redoing it and plugging it into my "emblem wires" as i have a 2018
Hey man what did you end up doing I have an 18 luxe and I’m going to pick mine up tomorrow to install
Hey any updates on a fix? I have the same issue and it’s a 2015. I have to switch headlights on and off again for it to turn back on.
Just want to repeat a comment that I saw here. The 2018+ all come with a plug already. You can find it around the middle of the front bumper. You dont have to remove the bumper to access it. Just kinda feel for a wire up under the front of the hood. Youll feel the plug. Pull on it a little and the tape will come loose. Just peel the tape and plastic back then splice into it. Made the install super easy.
Yo J. You're late. Just kidding. Keep up the good content. I can see you're making it big one day! As for the LED emblem, I have it gloss black too; glowing red. It's bleeding more than a girl's period. But who cares 😂
Oooh dang lol
I have the rgb emblem coming in the mail soon and this install helped out a lot for prepping for my install because after watching the rgb emblem install that you recently made I still had a ton of questions but referring back to this one which was much more thorough I’m pretty prepared. Great video!
Very nice! It’s a simple install. You’ll be fine!!
where did you get the rgb emblem
For those with a red sport, mine is a 2017 and there's a screw on the back of the emblem. I did mine while doing my HE so the bumper was already off.
Good detail to point out!
thats to much work honestly 😂🤦🏽♂️as a 19 year old who has no help and is trynna install this its hella stressful man
😂 It’s not so bad but I understand what you’re saying
Can you believe the dealership wanted to charge me $512 to install it. I said heck no.
Wow that is absurd!
@@SpeedCultureStudios I know. WTH!!!
Mr. speed I have a question I purchased the OEN led emblem with the plug it comes with dealer assist download instructions pan flit CRAZY complicated process. I also have the DIode always on module. What advise can you provide I ask you because you be all in and outside of your Q in advance I appreciate your assistance
I swear to god i love you dude. Ive been searching on how to install my light for 2 months now🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
I saw some other vids on UA-cam that were terrible so I knew I had to make one! Glad you found it!
This wouldn't be something that'd come factory direct installed would it? Finally just got my Q50 '18 luxe, with multiple Sport packages and saw the car already has this installed. Just seems odd someone would specifically seek this out, yet not customize anything else...
It's sharp looking, but I'm going to either buy an opaquer pen, or see if my local tint guy has one on hand to subdue the light output at night...it's just a bit much for me.
As I have the iridium blue color...what are you thoughts on doing this either standard black or possibly a deep blue to compliment the rest of the car? Your thoughts are appreciated.
Keep up the good work! Nice ride
I'm all for trying things out. If it's too bright for you, i'd be interested in seeing what you come up with.
First! Yo J, love the vids as always! Hope you are holding down Greenville!!
Always bro lol! I appreciate the support!
underwhelmed. show it at night...
Underwhelmed? It’s just an LED emblem install.
@@SpeedCultureStudios its just that ive seen them at night and they look pretty cool.
I purchased one and, after watching this, I have no confidence in myself in doing this correctly. :/
So it'll end up sitting until I find someone who can install it, lol
Lol. You can handle it!
@@SpeedCultureStudios Nah, my arm's too big along with my hands, so tight spaces with today's vehicles.
But we'll see when it shows up.
Nope, won't be able to do it myself.
Trying to find a shop that will.
Thank you so much for this tutorial!!! I got my LED emblem this monday and i was looking for a good way to do it on my own. The other videos on youtube are .......... uum .... they are sth. ^^
Exactly lol! I knew I had to make one because the other ones out there are junk lol
Can you guys share the link where you got yours? And also does it matter what year the car is for the led emblems ?
The issues i'm running into is removing the electrical connectors. Kinda tough to remove.
Tight space
Can you believe the dealership wanted to charge me $512 to install it. I said heck no.
great video, very thorough, my only issue was no night time pic/video? to really see the emblem pop
Hey boss I recently put it on my car and it won’t turn on at all or connect to the app did you have any issues with that at all and if so how did you fix it?
Either the light is bad or you don’t have a good connection to power
@@SpeedCultureStudios yea because I put it on the nuts connected to the battery and it wouldn’t turn on I wired it to my fog lights and it didn’t turn on at all and it was grounded correctly to
@@Landonsprasky so must be defective if you tested it directly to power. Dumb question but have to ask-did you make sure you put the correct wire to + and - ?
@@SpeedCultureStudios yea I did and I used my buddy tool to see if the wires on the led emblem were getting power to them from my battery terminals and they were def a defective led emblem getting a new replacement one soon but I think the led emblem wires werednt connected onto the logo correctly therefore it was faulty
I just got a q50 I wanna get drop in filters what do you recommend I’ve seen K&N filters get dirty I also saw you recommended some dry filters? Not sure what to get for best performance it’s my daily
I recommended the dry ones for a reason. They are the best option
@@SpeedCultureStudios thank you and do you have a certain brand you recommend? Thanks for responding by the way 🙌🏼
@@Esechapin aFe - I have a video on them. Pretty much anything you’d want to know inhale a video on. Check them out!
I don’t have the always on module but I do have the automatic headlights all the time... is there any way to have the emblem turn on with the same wiring because honestly I don’t even touch the light switches since I always have it on automatic mode... so would there be anyway to have it turn on at the same time the headlights turn on whenever it gets darker for the sensors to think it’s night?
I showed that in the video. It should be the pinkish gray wire.
@@SpeedCultureStudios so if I connect it to the same pink wire you connected yours it should turn on even if I have it on automatic mode?
@@SpeedCultureStudios not the same one you connected my bad, I meant the one you showed at the end will the emblem turn on when the headlights turn on after it gets to a certain point of darkness outside cause of the automatic headlight mode
@@Jose.r47 yes it will turn on when the auto head lights turn on
@@SpeedCultureStudios will it always pink and grey? I have the infiniti q60.
I installed everything and it worked fine, I was changing the color and it just turned off and hasn’t turned back on since, I tried deleting the app and downloading it multiple times, I know it’s not a wiring issue. Anyone can help?
@datboiralph7429 same issue..did you ever figure it out??
@@stephonbessellieu2846you ever figure it out ?
Hey speed I installed my carbon fiber led emblem from Jalisco’s CF the install went good, emblem was working for a week and a half until out of no where it just wouldn’t turn on anymore. I followed the steps from this video, I installed and reinstalled numerous times I re grounded with a new wire connector and still nothing. What are your thoughts? Thanks!
*Installed a reinstalled the app numerous times*
The app can be the issue, but it’s possible the emblem itself is not good
@@SpeedCultureStudios yeah I’m convinced it’s the app tbh because I just installed a new emblem yesterday Jaliscos sent me and it still doesn’t work. I mean what are the chances I get two faulty emblems lol ! I’m thinking I’m not splicing the pink and red wires correct but it’s not that hard to do I’m just following the steps on here. Thanks for your reply!
Also what washer size did you add on 11:37 ? (:
did u fix the issue? got a 2018 doing the same thing, keeps coming on and off intermittently
Is there one that has power when parking lights/headlights on, so it comes on when just the parking lights are on as well?
DOnt have my voltmeter handy :-|
I'm not sure which wire that is honestly. I didn't test all of them. I didn't think to have it on with just the parking lights because it would likely be daylight and it would be hard to see the led anyway.
I installed one on my Q50, now it changes colors by itself once its set and driving. how can I keep the same frequency??? any ideas.
You have to select the single color
Hey J. just curious. Where did you get that different engine cowl? am i seeing the sticker correct? (Hspark?)
That is just the factory shroud. I just put a Hotchkis sticker on it since they were supportive in sharing my content after my sway bar installation.
i’m looking for 2018 to do wiring but it is complicated the wire plug doesn’t want to come off
The plugs are so tight
Do you think you would’ve been able to add a prong onto the emblem wires to just plug into the harness ?
Probably. I would have preferred that.
Question what if I need to take of the bumper for Wtvr reason. Do I have to undo everything?
There isn't a whole lot to undo--you'd just have to disconnect the 2 wires.
Hey bro I’ve had mine for about 3 months now and today it randomly didn’t turn on.Ive checked my fuse and everything, do you think it could just be the emblem itself?
Could be yes. Otherwise your head lights wouldn’t be working either
how do i conmect phone to this i purchased but cant connect phone theres no app or anything
Check out my color changing led emblem install video. I show the app to use.
I’ve installed this and my battery kept dying every couple of days on me. So I bought a “gel” battery and two days later it was dead again in the morning. I don’t know what to do. All I have is underglow lights and the emblem. What should I do??? I’m too the point that I’m about to just rip it all off the car. No point in making it look good when I have to ask people to jump me off
You have to figure out where the draw is coming from. There is something pulling power even when your ignition is off.
I’m also having this issue
Old video so don't know if you'll respond, but that air intake cowl is it flush to the filter piece? Mine is the OEM cowl and there is some space between the insert pieces of the cowl and where my filters are located. I assume it is meant to be flush so no air escapes or is sucked inside.
Correct--it should fit snug into the air box.
@@SpeedCultureStudios Well, explains my drag upon acceleration. Thanks for the answer!
Would you happen to know where you purchased yours by chance?
That's weird that wouldn't show how they look in the dark when you can't really see in the light
The very end shows how they look in low light. Check out my IG for night photos and video!
Thanks. Just got doing this. Couldn't have done it without you. Getting that pink wire spliced was a pain in the ass since I couldn't figure out how to get the headlight harness off. Also, it took me about a half hour to get the airbox back in. But I got it done. Thanks for the help.
How did you get the harness off? I’m having a hard time unplugging it from the headlamp. Hard to see and feel. Not trying to break it. Fingers are sore 😆
Have you faced any complications after installing the illuminated emblem, with removing the bumper? Like do you have to unwire everything now to remove the bumper completely?
It’s only 2 wires to disconnect. Not a big issue. Don’t take the bumper off all that often
One of the best tutorials I've ever seen on UA-cam 👏👏👏👏
Hell yeah!
Do you have to snap off the harness to tap the power n link or just tap right on?
If you can access the widely conveniently without unclipping it I’m sure you can
Which wire is the DRL for driver’s side headlight? I’m installing the LED emblem i tapped it wit the green wire first but I didn’t have power and now I did. to the pink wire (headlights) and I get the power only when headlights on. I want it on basically wit the DRL and EVERYTIME I lock/unlock the car, which wire should I tap it with?
I’m not sure off the top of my head. You might need to use a test light to check the wires out unless someone can chime in with the correct wire.
Did you ever figure out what wire it was?
@@HomicidalKings Nah Bro i just tapped it on the headlight wire
@streetculturestudios can I put this on my 2012 g37 coupe ?
Not this one, no.
Good vid bro. Would you be able to get a few shots at night?
There will be some in follow up videos for sure. Also check IG
Old video but is there a way to connect the power to the daylight running lights
You can tap into whatever power source you want. Just know that it’ll be on whenever that source is getting power and off when it’s not
Did you have any trouble with the app? Ours won’t work and it won’t change colors
The app is terrible unfortunately. Try uninstalling then reinstalling. Just have to do that until it works
Whats the name of the app recently just set mine up but dont know what app to use
Dude I dunno why but trying to remove the headlight bulb wiring from the socket is insane right now.
It’s tough actually
@@SpeedCultureStudios so i ended up taking out. It’s Just there to hold it in place. No actual bulb. I think the 2018 model might have a different harness cuz I’m not seeing the same things.
It’s looking really good !!
Love the way it is a background light and is like a halo around the emblem. Great job!! I dont do IG is there a website or facebook page to contact him?
Yeah man he’s in all the Infiniti FB groups.
Does anyone know if it's possible on a q70 !!!
Check with Jaliscos Carbonfiber on IG. He may know for sure.
Do you have a link and instillation video for your front lip? Been looking for one for a while
ua-cam.com/video/WSoIOXQr9Ms/v-deo.html
How can I change the color ?
This particular one is not color changing but the rgb emblems connect to an app. I have a video on that as well!
To bad I cant just buy one without social media
You can-I just don’t recall his email address right nkw
My emblem tab broke
Would this be the same on the 2020 q50?
No I believe they are different
Subscribed!
Great work buddy! Whats the name of the track at the end?
Thank you!
I’d have to look at the music-it’s actually just a free track from the UA-cam studio
Does this tutorial also apply to the Q60?
Essentially, but wire colors might be different, so a test light would be a good thing to have.
Not a ratchet wrench but still a great video.
Not sure what you’re talking about lol. Ratchet wrench, drive ratchet, gear wrench, ratchet and socket...called lots of things.
Hey do you know the name of the app ?
LED lamp
What the flat peace on the front bottom of the car that makes it look lower in the front what is that called ?
its called a front splitter.
Speed Culture Studios thanks!
@@hemingwayzydeak1234 no problem!
What’s the app called for the control ?
Does not correspond with this emblem. Check out my RGB emblem video. I show the app in that one
can i put this on my ‘17 q60rs?
Confirm with Jaliscos
is it just me or are your videos always so quiet!!!
It’s just you.
Check your playback settings. Might be playing back through the ear piece rather than the speaker. Volume is perfect for me at about 30% on mobile and PC
Will this work on the 2019 q50 I dont see a grey wire but I have the pink one I don't wanna fuck anything up
emblem is kick ass, how much?
Under $150 I believe, but he’s always running deals or combo packs, so worth checking out!
Can you put this on g37 coupe?
I think they are different but he may have some available
I spliced my wire to the headlight and tried to test the ground wire for power to the emblem but got nothing, any suggestions?
What you recommend me if I want to take the bumper off do you have to disconnect everything and re wired again when out the bumper back on?
Does the light bleeds at night?
Not at dusk anyway-haven’t looked at it in dark dark yet
Got that emblem in today. But I'm having an issues if you might be able to help me out. I have installed it and tapped into the R/H headlight wireing harness. I used a quick splice clamp to splice into the main head light. (Pinkish) wire. Everything looks good but now my halo and eyebrow LEDs are coming on? The main and the emblem work. I only tapped that one wire. Any ideas