How to fix bent cpu pins on all intel boards By:NSC

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 33

  • @adlerweb
    @adlerweb Рік тому +1

    Well done - nice to see these things getting repaired. However: 21:50 - as you flipped the CPU it would be 5 contacts up, not down. Also you could check for the CPUs datasheet/pinout, there you'll find what function the affected pins are related to and can test it specifically. On a quick glance you might not notice if a memory channel or PCIe lane is still out.

    • @NSC-Modz
      @NSC-Modz  Рік тому +1

      Right, but all is working till now ;)

  • @robiocraft
    @robiocraft 3 місяці тому +2

    There is an easy video editing trick that you can use to remove flicker - duplicate the video, and have them overlayed with a couple frame difference, then make the top layer 50% visible and the flicker should be more even

    • @NSC-Modz
      @NSC-Modz  3 місяці тому +1

      Thank you so much, gonna try it next time 😀

  • @mm0077
    @mm0077 3 роки тому +7

    Very interesting and thank you for sharing your skill and experience.

    • @NSC-Modz
      @NSC-Modz  3 роки тому +2

      You always very welcome. Thank you much to.

    • @Sochack
      @Sochack 10 місяців тому

      ​@@NSC-Modz I have a pin or two that is broken on the tip, I'm thinking of adding some solder to make it look like the end of the pin to complete the circuit

    • @NSC-Modz
      @NSC-Modz  10 місяців тому +2

      Yeah, but try first if it's gonna work or not, if it's working, than just let it like it is 😅

  • @rawandjaza5929
    @rawandjaza5929 3 роки тому

    Hello , I want to do some modification on ps4 so i have a question does ps4 run and work without blu ray disc drive ? Ps4 jailbroken and install game digitally i want disconnect disc drive , need more space.

  • @jeffbanfieldsflwr3537
    @jeffbanfieldsflwr3537 3 роки тому +3

    What's up brother. I hope you are doing well.

    • @NSC-Modz
      @NSC-Modz  3 роки тому

      Yeah, I'm still alive, that's most important 😀 Hope you find to.

  • @sandman_7326
    @sandman_7326 2 роки тому +1

    Crafting / Hobby Tool - Exacto Knife helps with this problem .

  • @mitsos1461
    @mitsos1461 Рік тому +1

    Nice idea to bent back pins with needle under and pincet above. Thanks for sharing. About x58 chipset. Legentary platform. But because of lack of AVX instructions lot new games does not start on it, warzone 2 for example. How about with almost same amount of money the cheapest am4 motherbord with ryzen 5 or 7 first of second generation? They are dirty cheap now, play all games, with upgrate path, great basis for budget gaming pc. But i feel is more a hobby for you. Thanks again!

    • @NSC-Modz
      @NSC-Modz  Рік тому +2

      Yeah, that's right. Had problems also to start some new Games like Dead Stranding. So I'm now with 2 AMD R9 5950X, one with watercooling and the second one for my living room. Both with the Asus Dark Hero motherboard, this is overkill for the next years. 😆 If you looking for a new system, than go at last for the R7 58003XD or the R9 5900. Best for the money, and best for the future.

  • @djboostq8620
    @djboostq8620 Рік тому +1

    Bro NSC i buy b460 aorus edition for 5$ with same problem it worth for trying or not 😅

  • @JmlR2002
    @JmlR2002 3 роки тому

    U think there gonna be ps3's consoles working for 10 years since most died and got destroyed by people and they hot by nature suffering from all type of stuff

  • @uxchris
    @uxchris 2 роки тому

    You can fix the light problem by using the correct framerate while recording :) Nice vid though!

    • @NSC-Modz
      @NSC-Modz  2 роки тому

      Tysm, You always welcome 😉

  • @m.sch.1123
    @m.sch.1123 3 роки тому +1

    Ich bin an sowas verzweifelt :-( Ich würde, damit du noch viel Spaß mit dem Board hast auch mal unter den Kühlern von den Spannungswandlern schauen ob die Wärmeleitpatz noch okay sind 🙂

    • @NSC-Modz
      @NSC-Modz  3 роки тому

      Längst getan mein Freund 😀 aber fürs Video ist der Chipsatz wichtiger zu erwähnen ^^

    • @m.sch.1123
      @m.sch.1123 3 роки тому

      @@NSC-Modz Ich kontrollier dann ALLES🙂Auch die CMOS BatterieLOL..Die sind dann auch mal leer^^

    • @m.sch.1123
      @m.sch.1123 3 роки тому

      Möchtest du viel Freude an den Intel Prozessoren..Köpf die und mach da auch Liquid Metal droff..passiert mit einen I7 4790 K gleich knapp -20 Grad 🙂

    • @NSC-Modz
      @NSC-Modz  3 роки тому +1

      @@m.sch.1123 hehe ja, aber bei 1366 Xeons nicht nötig, sind alle zum glück verlötet ^^

    • @NSC-Modz
      @NSC-Modz  3 роки тому

      @@m.sch.1123 oh ja, wenn dann gleich alles überprüfen. Sobald etwas mir gehört wird gehengt und gepflegt :)

  • @Martin-ot7xj
    @Martin-ot7xj 3 роки тому +1

    Hi , there , it was perfect

    • @NSC-Modz
      @NSC-Modz  3 роки тому

      Thank you very much.

  • @bjornvanoppen
    @bjornvanoppen Рік тому

    sorry but it is not fixt becouse your cpu cooler on the bord is not working this means problem with pins
    also gpu coolers wont work

    • @NSC-Modz
      @NSC-Modz  Рік тому

      My cooler is working, all is working, i can do a video if you like 😆 all is working, god thanks xD

    • @briandillon724
      @briandillon724 Рік тому

      it wasn't plugged it thats why it wasn't on

    • @briandillon724
      @briandillon724 Рік тому +1

      also gpu cooler wont kick in until its needed. most gpu do that now

    • @NSC-Modz
      @NSC-Modz  Рік тому

      Right... 🤗✌️