Makita Cordless LXT Pencil Drill Driver DF012DSE Unboxing & Demo

Makita In-Line Cordless Drill Driver
Product Used Amazon Links
Click Links For More Information & Or To Purchase
Complete with 2x 1.5 Ah Li-Ion Batteries & Charger in Carry Case
Makita DF012DSE Pencil Drill Driver - amzn.to/2RFH7Ci
The Makita LXT pencil drill driver is ideal for drilling and screwdriving applications in tight spaces or where space is at a premium, such as in cupboards and beneath work surfaces.
is supplied with a 7.2V lithium-ion battery and a battery charger.
High comfort grips
Keyless single sleeve hex chuck
Lithium-ion batteries giving 430% greater run time than their Ni-MH or Ni-Cad counterparts
LED job light with on/off switch
Forward and reverse trigger
21 torque settings plus drill mode
Use inline or in pistol mode
Soft start trigger
Manufacturer's part DF010DSE
Technical Specification
Drive shank hex ¼ in
Battery Lithium-ion
Max diameter (steel) 5mm
Max diameter (wood) 6mm
Vibration drilling 2.5m/sec²
No load speed 650rpm high, 200rpm low
Vibration K factor 1.5m.sec²
Noise sound pressure 70dB
Noise K factor 3dB
Weight 0.55kg
Voltage 7.2V
Max torque 5.6Nm
Torque settings 21 + drill
Any questions or comments please leave below.
For more please check my channel, hit the like button and subscribe.
Adding more videos every week.
Hope you enjoyed Watching Thank You.
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
This help support the channel and allows us to continue to make videos like this. Thank you for the support Guys.

[@brendanfarthing]

Thanks for the demo mate.

[@zinc121]

good review. thanks!

[@ScoobyRolla]

Thank you appreciate the positive feedback 👍🏼

[@eliascruz9757]

Cruz ✝️. Great Interpretation in the grammar for me understanding the Makita tool

[@ScoobyRolla]

Thank you appreciate it & thanks for watching. Hope you are having a great day

[@jamesadams7131]

That's all you really need for small screws. You can pre-drill with it, and run your screws. When you're using smaller screws it's always good to pre-drill anyway.

[@ScoobyRolla]

James Adams thanks for the advice appreciate it. Thank you for watching you have a great day 👍🏼

[@trevord7659]

How is the torque setting on the drill? Can you turn it down for elecrronics?
Edit: I see there are 21 clutch settings. 32 to 50 in.lbs

[@miasam9666]

Thanks for the great review. When i use an ordinary 1/4 hex bit it will not fit snug in the chuck, it will move up and down, is there a solution for this issue or it's normal?

[@1d1hamby]

I used mine on hammer drill setting and set tap-cons in concrete.

[@ScoobyRolla]

+d hamby hi , haven't tried that. Good to know thank you

[@urjnlegend]

So this is also a hammer drill

[@The_Story_Channel]

@@urjnlegend no, d hamby is either being facetious or is a dumbass. This is not a hammer drill, it only has a drill setting.

[@TechnoLuke]

Can you use it as a regular screwdriver? I mean when I assemble delicate Ikea furnitures when it stops on lowest torque can I tighten screw manually? Bigger tool I have even on lowest torque screws in way to much and destroys furniture.

[@seanh1988]

You sure can, it has a manual screwdriver mode.

[@xaviertaylor759]

Thanks for the review. I thought it had a clutch? If you tighten the screws, it doesn't look like it was slipping?

[@ScoobyRolla]

Hi Xavier Taylor, glad I could help & thank you for watching too. Really good little drill really good for electrical work too. Hope you have a great weekend 👍🏼

[@EricPaul63]

Well, for left handed people, this tool is not adapted. Really a pity.

[@ricric9521]

Nice but the Metabo (Hitachi) similar model is almost 25% thecost and nearly as nice with 2 batteries, case and charger

[@ScoobyRolla]

Thanks for sharing ricric, it’s down to people what they like, not use about the quality between them thou. Thanks for watching I really appreciate it. Stay safe

[@seanh1988]

Hitachi has 3.6v battery compared to the Makita 7.2v so the battery on the Makita will last much longer. Also the Hitachi has known issues with the switch burning out and the rubber on the handle peeling off. I've got the Hitachi, had it the past 5 years and I've had to replace the motor once (3 year mark) and the handle twice due to the rubber peeling.

[@razvanionel3039]

unsealed boxes Makita...

[@slingblade8963]

Is that in drill mode? My one, same concept just slightly different skin, put screws in like an impact driver.

[@ScoobyRolla]

Hi yes this one does have drill mode to. Hope this helps & thanks for watching really appreciate it.

[@ibraheem-aljwaly5933]

كيف لي ان احصل على المنتج انا من العراق

[@javierabarca9534]

Costo para Lima Perú