Xpulse 4V 200 | Maddog ScoutX Aux Lights | Project 83X Headlamp Grill | BOBO Charger Installation

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • Product Purchase Links:
    Maddog ScoutX Aux Lights: gthouse.shop/s...
    Maddog Switch Pro: gthouse.shop/s...
    Maddog Wire Harness Pro: gthouse.shop/s...
    Maddog ScoutX Filters: gthouse.shop/s...
    Aux Light Mounting Clamps: gthouse.shop/s...
    Project 83X Headlight Grill: gthouse.shop/s...
    Project 83X Tail Rack: gthouse.shop/s...

КОМЕНТАРІ • 64

  • @microrao
    @microrao 2 роки тому +7

    Although some parts of the wiring are unclear, this is by far the BEST video on installation of fog lights.

  • @omkarbordavekar4098
    @omkarbordavekar4098 2 роки тому +6

    Thank you. Today I have installed maddog scout x by my own. Only due to your video. Thanks for giving confidence. So happy after seeing results. N learnt many more things.

    • @motovin77
      @motovin77  2 роки тому +1

      That's awesome, fantastic job 🤩

  • @naiduvinay4911
    @naiduvinay4911 2 роки тому +11

    "If you loose the speedometer, you can't see your speed" 👍

  • @VibhorWase
    @VibhorWase 2 роки тому +2

    It looks even more badass now

  • @automotriztechnica
    @automotriztechnica 2 роки тому +1

    It looks more beautiful than before 😀👍

  • @brijeshparmar7460
    @brijeshparmar7460 2 роки тому +13

    Bro.. R u the engineer who has designed the hero xpluse.. I am wondering how u know abt the entire installation

    • @motovin77
      @motovin77  2 роки тому +3

      Hahahahaha no brother i didn't design the Xpulse 😀 it's just a simple electric circuit, once you study it, it's quite simple.

    • @brijeshparmar7460
      @brijeshparmar7460 2 роки тому +3

      @@motovin77 I like you videos about the xpluse 200 as I am planning to buy it. I am impressed with you cause you do lot of things at your own. So i request you to keep inspiring upcoming owners like me and provide the insight about Xpluse. With regard to study of installation, if there is any guide or video do let me know.

    • @motovin77
      @motovin77  2 роки тому

      @@brijeshparmar7460 Thanks 🙏😊

    • @avinashgowda8932
      @avinashgowda8932 2 роки тому +1

      I am into xpulse family now, yesterday I bought xpulse 200 4v, even I nees to install aux light. Looks simple but u have an great idea of it

    • @motovin77
      @motovin77  2 роки тому +1

      @@avinashgowda8932 Congratulations 👍

  • @jsyn_p
    @jsyn_p Місяць тому

    Very good video. Probably one of the most comprehensive videos on YT. I have a query though. Do we need to ground the black wire of the harness or does it go directly into the negative terminal of the battery.

    • @rehnanehal2199
      @rehnanehal2199 8 днів тому +1

      We can go for both ..even u can ground it or u can go for battery terminal

  • @ujjwal94roy
    @ujjwal94roy 2 роки тому

    Thanks for making it simple.....

  • @OFFRoader-z9g
    @OFFRoader-z9g Місяць тому

    Sir what if the fuel is there inside tank? How to remove

  • @kkhaanabadoshh
    @kkhaanabadoshh Місяць тому

    Is it legal to put 40W Aux lights in this bike? I remember you went for Scout Aux for Highness as its illegal to intall Aux lights with higher wattage than the stock headlight.

  • @nitinhadale1519
    @nitinhadale1519 2 роки тому +3

    Is this the most versatile and value for money bike ?
    City
    Highway
    Off road

    • @motovin77
      @motovin77  2 роки тому +2

      Absolutely it is and there is no competition at this price point...
      Lowest cost of purchase and maintenance...

  • @ArnabMurshidabadi
    @ArnabMurshidabadi 3 місяці тому +1

    Hello sir... One question I have. To install the clamps, you need to work with the screws that are holding the forks. Is it okay to do so?

    • @motovin77
      @motovin77  3 місяці тому +1

      Yes sir that is correct and it's completely safe, just ensure to tighten the bolts back as they were before

    • @ArnabMurshidabadi
      @ArnabMurshidabadi 3 місяці тому +1

      @@motovin77 Thank you sir. 👍🏽 Actually I have ScoutX installed on the engine guard, but that location absorbs some amount of illumination. So I thought about installing it on the handlebar but was considering not to hamper any factory fittings. I decided the place to be just below the indicators using the Maddog Fork Clamp (Rs-1699), but I doubt it'll touch the tank when the handlebar is turned to the maximum. So I think I'll have to do what you've done.

  • @masacheku
    @masacheku 2 роки тому +1

    Very useful! Subscribed :)

  • @rahul_rathva_
    @rahul_rathva_ Рік тому +1

    Sir Love from gujarat!....kya garaj se Bina wires cut Kiye fog light lagvane se warranty rahti hai ya nahi ?

    • @motovin77
      @motovin77  Рік тому +1

      Thanks Bhai 👍 yes if no original wire is cut, warranty is intact.

  • @vinaypanchal1692
    @vinaypanchal1692 Рік тому +1

    Hey, Vinay is ther any leakage of fuel while removing the fuel tank?. I want to install the same with my xpulse can you plz help.

    • @motovin77
      @motovin77  Рік тому

      Yes few drops of fuel will leak when you disconnect the fuel line to take off the tank. That should not be an issue.

    • @vinaypanchal1692
      @vinaypanchal1692 Рік тому +1

      @@motovin77 that's pretty much ok. My concern is there any continuous flow of petrol from the tank. If the tank was full. Btw thanks for your reply and support.

  • @MSN_MOTO
    @MSN_MOTO 2 роки тому

    Excellent job

  • @rameshkumar8965
    @rameshkumar8965 2 роки тому

    Thanks, Very nicely narrated, can i use wire from horn to trigger relay? Anyways horn works only after ignition is on.
    Or Can I tap a wire from low beam light and use that to trigger relay, so Auxiliary lights work only when engine starts?

  • @bilbobaggins3747
    @bilbobaggins3747 2 роки тому +1

    Wow man great

  • @ujjwal94roy
    @ujjwal94roy 2 роки тому +1

    Can we use similar thing to connect bobo mobile holder/charger with ignition ? Since you connected your directly to battery.

  • @MountainsMoto
    @MountainsMoto 2 роки тому +1

    Thanks, i also bought the Scout lights for my Xpulse. Can you tell me while pulling out all tank tubes, will it also spill the fuel ?

    • @motovin77
      @motovin77  2 роки тому +1

      Not really, but a few drops might which isn't an issue.

  • @rajatghosh
    @rajatghosh 2 роки тому +2

    show room claim says xpulse battery too weak to handle extra lights, do u have any idea on this ? or feedback ?

    • @motovin77
      @motovin77  2 роки тому +1

      No idea sir, i use the lights mostly on highway for night rides only.

  • @ashutoshranjan131
    @ashutoshranjan131 2 роки тому +2

    i have booked the same colour xpulse , can you tell me whats the price of Aux Light with installation charges ? , also will it affect warranty ?

    • @motovin77
      @motovin77  2 роки тому +3

      Congratulations 👍
      Lights costed me about 8000 and installation is self.. should not affect warranty as it's a seperate wiring harness

  • @Saikat_Palit
    @Saikat_Palit 2 роки тому

    You installed Scout, and non pro switch and harness in your cb350. Any reason why you switched to pro switch and harness? Are the non pro ones not suitable during rain?
    Also for fast night riding (80+) is Scout enough in cb350?

  • @abhinavkashyap2000
    @abhinavkashyap2000 2 роки тому +2

    Hi, I liked this video as you were quite thorough with installation steps. I own a hero Xpulse BS6 but am hesitant in installing aux lights. As per Hero service center that might void the bike's warrenty. Did you confirm this with Hero ?

    • @motovin77
      @motovin77  2 роки тому +4

      Thanks 😊🙏 warranty will not be void as none of the original wiring was cut or tampered.

    • @abhinavkashyap2000
      @abhinavkashyap2000 2 роки тому +1

      @@motovin77 Thanks a lot for sharing :)

  • @TusharWalwaikar
    @TusharWalwaikar 2 роки тому +1

    Can we connect the bobo charger without wire cutting to the ignition ???

    • @motovin77
      @motovin77  2 роки тому

      Yes, connect to the same wire where i connected the trigger wire of ScoutX wiring.

  • @BD-vg5gg
    @BD-vg5gg 2 роки тому +1

    Sir i have one dout here.. regarding the actual switch for the scouts.. do we have a connector in the harness itself for the switch to plug in??

    • @motovin77
      @motovin77  2 роки тому +1

      Yes, it's plug and play

  • @rahulgajinkar6084
    @rahulgajinkar6084 2 роки тому +3

    Any rusting issues in this bike

    • @motovin77
      @motovin77  2 роки тому +1

      Got it 2 weeks ago, nothing so far...

  • @harishk9720
    @harishk9720 2 роки тому

    Person with white tshirt is your brother? I like your Tshirts bro where did you buy them?

  • @rahulgajinkar6084
    @rahulgajinkar6084 2 роки тому +2

    What about material quality in this bike

    • @motovin77
      @motovin77  2 роки тому

      Much more improvement quality, refinement, fit and finish....

    • @kiru4258
      @kiru4258 2 роки тому

      Good question

  • @lofiwaves2123
    @lofiwaves2123 2 роки тому +1

    Will you change your xpulse's exhaust or not I also want to change it? But doesn't want to drop it's mileage

    • @motovin77
      @motovin77  2 роки тому +1

      Not really at this point.

  • @hariharan8573
    @hariharan8573 2 роки тому

    When did you book your 4V?

  • @thomaskamei4268
    @thomaskamei4268 2 роки тому

    👍👍👍

  • @AshieshDutta
    @AshieshDutta 2 роки тому

    Where is your cb350 bro...

  • @bittugeorge1158
    @bittugeorge1158 2 роки тому +1

    Where is Honda hness