Thank you! I really needed to fabricate a simple bike trailer hitch ... my garden plot is about two miles away from my house and now I can zip over there without the use of a car!! Thanks again!
Brilliant. Thanks for the info. I want to build a bike trailer for my mobile bike repair business. This helped a ton. I’m going to watch the other video now. Thank you
Hey, thanks for the video! I'm missing what the end of the trailer looks like that connects to the thimble with the pin in it. I there a U bolt or something similar at the end of the wood rod? Any chance you could take some close up pictures?
That is awesome , thank you so much you just saved me a headache I was trying to figure out how to make a cart seat post from a bicycle, I came across your video👏👏
Thanks. I know, I messed up by not showing it. Since it was a follow-up video, I neglected that part. This one should show the connection. Just skip through all the chatter. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Thanks Jakob. It is just a 1/4" x 1 and 1/2" hitch pin. This one has a D wire that locks it in place. They are commonly used as a safety pin on trailer hitches, and are available either on Amazon or any hardware store.
I like that design can you lay the bike down without the trailer being on its side I'd like to have a good Pivot Point at seatpost 4 up down left right
Nice shop! I'm going to a seat neck hitch design and will use 2 hose clamps on a large oblong chain link. The trailer pin will go through a second link on the Two link chain. MarkMannM2
Ok, you showed the seat post kit, but you didn't show the actual mounting on the trailer tongue in the video. Can you explain how that mount to the trailer tongue is supposed to be done. please. I am wondering why just a 1/2" horseshoe was chosen and not a larger one? This is very simplistic in design and that is great, but I wonder how well it holds up over time with the big trailer cart you have in the video. Your tow bar to the actual trailer is a straight piece. Lots of bike trailers use a rounded tow bar that curves up over the rear tire or even a hitch anchored to the bike rear axle. I am in the process of trying to construct a barrel trailer which will be done up like the ones you see pulled by a lawn tractor as cars. It is a total DIY project and every time I view a different video, I seem to get more and more ideas for doing it up. This one may be great, but one issue I can see is that with a suspension seat as my bike has, it would put the seat up higher to add a hitch setup on that post. Ultimately, it defeats the purpose of the suspension seat, as it won't allow the seat to drop down enough. I need a lower seat than what came on my bike, as it sits too high already. My seat also flips up so I can remove my battery from my electric bike. A seat post setup as yours would mean I could not use the seat in the same manner in removal of the battery, as the hitch would then be in the way. No real issue on your bike, but it may be on my own. Can you address this reply with your own thoughts, please? Nice modification and nice video explaining it. I'll have to give it a try and see how it works out. My barrel train car will be done up as an airplane and house my dogs as I ride about my neighborhood. I drove a motorcycle sidecar rig for years and riding with my dogs was a great pleasure, so this bike trailer is something I really want to make for them and me to enjoy. Thanks for the video.
Greetings James. I have used this hitch on suspension seat posts. But yours sounds like it may not work for this design, if you do not have enough height for it. You might need to go with a rear axle mounted hitch. The 1/2" thimble is the largest one available locally, and it has the proper inside diameter for most seat posts. I have used this design for canoe and utility trailers on several of our bikes for about 7 years, with no issues. I even pulled a canoe, with two 10 year old boys inside of it, behind my bike in a local parade, using this hitch. If you want to see how a trailer tongue connects to the hitch, I have a link to a previous video in my reply to Nik, about 4 comments below yours. Good luck with your project. It sounds fun.
You did make me giggle when you said you were using your daughters bike as she wasn't there .... ;D))) I wonder if she knows you take her things apart as soon as she turns her back ;D thank you sir for the tips , I am trying to be more handy with making things from what I have already and recycled materials , it's fun trying to figure it out : )
the center gravity of the trailer is too high. it will rock to the point flip over. Very danger. Need mount it as low as possible. ----- however, I was wondering if you ha e a diy way tp make seat post from conduit?
The trailer tongue is in alignment with the top of the trailer. If there is a danger of tipping over, I have not expereinced it. Not sure I understand about a seat post from conduit.I have made trailer tongues fron conduit in the past, rather than from wood. Flatten the end of the conduit in a vise. Drill a 1/4" hole, and grind the end rounded, so it fits into the hitch.
Hey John. I messed up by not showing the tongue. It was on a previous video, so I neglected to show it again. In the past, I used metal conduit as the tongue, squeezed the end together in a vise, rounded it, and drilled a 1/4" hole to fit the hitch. The last trailer had a wooden tongue, with a piece of 3/16" metal attached vertically to the end, to fit into the hitch. Here is the link to the other video. Just skip to the part showing the tongue. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
@@User43.2 There needs to be a flattened end on the trailer tongue, that will fit in the slot, and be pinned to the hitch. It is shown in this video. ua-cam.com/video/Bu2f29JWAV4/v-deo.html Luckily, it is within the first 3 minutes, so you don't need to be subjected to too much of my rambling.
I used it for the end of the trailer tongue, which slips into the seat post hitch. I neglected to show it is this video, and have beeen hearing about it ever since. I show it in this previous video. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
You're right. I should have shown the connection. I had done so in a previous video , so neglected to do it in this one. In the other video, I show how it connects within the first 5 minutes, so you don't have to be subjected to the whole thing. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
@@backwoodbasics9383 But it doesn't have any swivel action that allows you to lay the bike at an angle as shown in the video, unless it means that the hole in the tongue is much larger than the pin diameter. This video needed to include the tongue and pin clip.
you must be riding super slow. I made a similar connection 5 years ago like yours from parts directly from the hardware store, but I found a trailer without low center gravity like Burly Bike Trailer, Trailer is not stable, Connector needs to be as low as possible.
You don’t show the pin. And you don’t show how you attach the piece of wood to your device on the seat post… great ideas are only as good as the details that you can share… Respectfully, you’ve left out to the most important parts!!!!!
Agreed. That was an oversight on my part. I had done a previous video showing the connection, and neglected show it again in this one. Here is the video that shows what you wanted to see. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Lighting response. Thank you for the full demonstration. I actually needed to see the final product in use and the connection and other things im bout to dive in. Im tapping into a fabrication tickle of late😅. Started with a fan base that broke, and well I made a base out of wood. Cut 2 circles. 20 inch radius and 3, 2 inch flex board strips for the walls. Spray painted primer, full can of glossy black. Funny thing I learned. Over spray and use the spary force to push paint around... so satisfying, kinda like a black epoxy. A week later. Finnished with a full can of clear. And then a wonderful happy accident happened. The clear finish dried up in a dry skin looking texture. So i decided to make the whole thing look like that. Now, when light hits the base. ✨️✨️✨️ So nice. RIG, Mr. Bob Ross.🌌
You missed out the most important bit. How do you connect the trailer to the hitch. If you have to connect it to the pin well that`s not very safe especially if you have your dog in the trailer. We need to see it CLOSE UP while your manouvering the hitch not 10 yards away. So you connected your hitch to the saddle stem and put your pin in to secure it and said "that`s it set to go" OK but what comes next is to know where you connect the trailer to. The only place I see is the circular part of the pin. Come on Backwood show us properly and finish your demo off by connecting the trailer to which part of the hitch CLOSE UP. Why pay more you ask, well to be sure the trailer does rip the pin out of the hitch.
I know. It was a bad move. I neglected it because, in my head, it was a follow-up video, and I just failed to repeat the hitch connection. It is shown in this previous video. Just skip to the hitch part. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
i am building a bike camper and i had no clue what i was going to do for a hitch but now i have the perfect thing, Thanks!
Great! Hope it works for you.
Thank you! I really needed to fabricate a simple bike trailer hitch ... my garden plot is about two miles away from my house and now I can zip over there without the use of a car!! Thanks again!
I hope it works for you Kurt. Good luck with the garden. First frost for us coming tonight.
Well done 👍 great job make a e bike camper you have a great time camping 🏕️ out in the woods in the summer 🌞 .i love mine never have to pay for hotels
Thank you for this ingenuity. Exactly what I need and within my very limited budget! Cheers!
Thanks a bunch I'm putting together a trailer and wasn't sure how I would connect it. This is a perfect solution.
Good to hear! It works well. Good luck on your project.
Brilliant. Thanks for the info. I want to build a bike trailer for my mobile bike repair business. This helped a ton. I’m going to watch the other video now. Thank you
Hey, thanks for the video! I'm missing what the end of the trailer looks like that connects to the thimble with the pin in it. I there a U bolt or something similar at the end of the wood rod? Any chance you could take some close up pictures?
The end of the trailer tongue is shown in this video. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
What a beautiful cargo trailer.
Thanks. We use it now behind our ebikes now. I made a hitch for the rear rack. I will try to get a video made of it once the weather warms up.
A great design. Perfection there.
PARTS Question:
Where did you call the sleeves? PVC sleeves?
That is awesome , thank you so much you just saved me a headache I was trying to figure out how to make a cart seat post from a bicycle, I came across your video👏👏
You, sir, are a freaking genius!
This is great! But I need thatt set up, clamp, saws, drills, etc. I have a drill though!
Hah. Probably a drill is all that is needed. Lopping off the ends is likely not necessary.
wow clever idea! just what I needed, thank you sir!
Great idea mate and thanks for sharing.
How does it hold up when stopping abruptly?
perfect example for youtube viewers like me. Thank you :)
Great idea you have totally solved my problem with a cheap functional option cheers
I'm glad to hear it! Thanks.
I love it.. I will absolutely be playing with this concept soon. You should look into Paul Elkins.
Will do. Thanks for the feedback.
Great video, thank you. Maybe you could, however, show us how you attach the arm of the trailer to the hitch that you just made.
Thanks. I know, I messed up by not showing it. Since it was a follow-up video, I neglected that part. This one should show the connection. Just skip through all the chatter. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
What is the pin called that goes into the thimble? I really appreciate this video and your great attitude :-)
Thanks Jakob. It is just a 1/4" x 1 and 1/2" hitch pin. This one has a D wire that locks it in place. They are commonly used as a safety pin on trailer hitches, and are available either on Amazon or any hardware store.
Cotter pin
i am in the process of building a hitch to hook to the Rear Bike Rack, i will be using a Golf bag Cart as a Trailer, the kind with Air Tires.
Interesting idea. Good luck.
I like that design can you lay the bike down without the trailer being on its side I'd like to have a good Pivot Point at seatpost 4 up down left right
Thank you! And very much enjoy your teaching style
That's very nice to hear Annette. Thanks.
Did i miss what the connection was? What is it connected to?
Thanks mark
Thank you.
Nice shop! I'm going to a seat neck hitch design and will use 2 hose clamps on a large oblong chain link. The trailer pin will go through a second link on the Two link chain. MarkMannM2
Sounds interesting Mark. Good luck!
Ok, you showed the seat post kit, but you didn't show the actual mounting on the trailer tongue in the video. Can you explain how that mount to the trailer tongue is supposed to be done. please. I am wondering why just a 1/2" horseshoe was chosen and not a larger one? This is very simplistic in design and that is great, but I wonder how well it holds up over time with the big trailer cart you have in the video. Your tow bar to the actual trailer is a straight piece. Lots of bike trailers use a rounded tow bar that curves up over the rear tire or even a hitch anchored to the bike rear axle. I am in the process of trying to construct a barrel trailer which will be done up like the ones you see pulled by a lawn tractor as cars. It is a total DIY project and every time I view a different video, I seem to get more and more ideas for doing it up. This one may be great, but one issue I can see is that with a suspension seat as my bike has, it would put the seat up higher to add a hitch setup on that post. Ultimately, it defeats the purpose of the suspension seat, as it won't allow the seat to drop down enough. I need a lower seat than what came on my bike, as it sits too high already. My seat also flips up so I can remove my battery from my electric bike. A seat post setup as yours would mean I could not use the seat in the same manner in removal of the battery, as the hitch would then be in the way. No real issue on your bike, but it may be on my own. Can you address this reply with your own thoughts, please? Nice modification and nice video explaining it. I'll have to give it a try and see how it works out. My barrel train car will be done up as an airplane and house my dogs as I ride about my neighborhood. I drove a motorcycle sidecar rig for years and riding with my dogs was a great pleasure, so this bike trailer is something I really want to make for them and me to enjoy. Thanks for the video.
Greetings James. I have used this hitch on suspension seat posts. But yours sounds like it may not work for this design, if you do not have enough height for it. You might need to go with a rear axle mounted hitch. The 1/2" thimble is the largest one available locally, and it has the proper inside diameter for most seat posts. I have used this design for canoe and utility trailers on several of our bikes for about 7 years, with no issues. I even pulled a canoe, with two 10 year old boys inside of it, behind my bike in a local parade, using this hitch. If you want to see how a trailer tongue connects to the hitch, I have a link to a previous video in my reply to Nik, about 4 comments below yours. Good luck with your project. It sounds fun.
You did make me giggle when you said you were using your daughters bike as she wasn't there .... ;D))) I wonder if she knows you take her things apart as soon as she turns her back ;D thank you sir for the tips , I am trying to be more handy with making things from what I have already and recycled materials , it's fun trying to figure it out : )
Thanks! Good for you, trying to be more resourceful.
Is this the Red Green channel?
the center gravity of the trailer is too high. it will rock to the point flip over. Very danger.
Need mount it as low as possible.
-----
however, I was wondering if you ha e a diy way tp make seat post from conduit?
The trailer tongue is in alignment with the top of the trailer. If there is a danger of tipping over, I have not expereinced it. Not sure I understand about a seat post from conduit.I have made trailer tongues fron conduit in the past, rather than from wood. Flatten the end of the conduit in a vise. Drill a 1/4" hole, and grind the end rounded, so it fits into the hitch.
What are you using on the tongue of the trailer to hook it up to the seat hitch?
Hey John. I messed up by not showing the tongue. It was on a previous video, so I neglected to show it again. In the past, I used metal conduit as the tongue, squeezed the end together in a vise, rounded it, and drilled a 1/4" hole to fit the hitch. The last trailer had a wooden tongue, with a piece of 3/16" metal attached vertically to the end, to fit into the hitch. Here is the link to the other video. Just skip to the part showing the tongue.
ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Thankyou
The long piece that goes to the seat post is made out of wood!
Awesome mate, cheers for sharing!
Thanks Jordan.
@@backwoodbasics9383 @BackWood Basics how do you connect your trailer to the thimble/safety pin?
@@User43.2 There needs to be a flattened end on the trailer tongue, that will fit in the slot, and be pinned to the hitch. It is shown in this video. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Luckily, it is within the first 3 minutes, so you don't need to be subjected to too much of my rambling.
@@User43.2 This video should show you what it looks like. ua-cam.com/video/Bu2f29JWAV4/v-deo.html
to Kind mate!
What was the 3/16 bar stock for?
I used it for the end of the trailer tongue, which slips into the seat post hitch. I neglected to show it is this video, and have beeen hearing about it ever since. I show it in this previous video.
ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Thank you!
Nice! Thx!
What a great idea! My husband will love this! Thank you for sharing!
Thanks Maria. I hope it helps.
Need to show the connection
You're right. I should have shown the connection. I had done so in a previous video , so neglected to do it in this one. In the other video, I show how it connects within the first 5 minutes, so you don't have to be subjected to the whole thing.
ua-cam.com/video/Bu2f29JWAV4/v-deo.html
@@backwoodbasics9383 But it doesn't have any swivel action that allows you to lay the bike at an angle as shown in the video, unless it means that the hole in the tongue is much larger than the pin diameter. This video needed to include the tongue and pin clip.
@@thomasmiller1340 ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Das ist wunderbar.
Great
Thanks!
you must be riding super slow. I made a similar connection 5 years ago like yours from parts directly from the hardware store, but I found a trailer without low center gravity like Burly Bike Trailer, Trailer is not stable, Connector needs to be as low as possible.
You don’t show the pin. And you don’t show how you attach the piece of wood to your device on the seat post… great ideas are only as good as the details that you can share… Respectfully, you’ve left out to the most important parts!!!!!
Agreed. That was an oversight on my part. I had done a previous video showing the connection, and neglected show it again in this one. Here is the video that shows what you wanted to see.
ua-cam.com/video/Bu2f29JWAV4/v-deo.html
Lighting response. Thank you for the full demonstration. I actually needed to see the final product in use and the connection and other things im bout to dive in. Im tapping into a fabrication tickle of late😅. Started with a fan base that broke, and well I made a base out of wood. Cut 2 circles. 20 inch radius and 3, 2 inch flex board strips for the walls. Spray painted primer, full can of glossy black. Funny thing I learned. Over spray and use the spary force to push paint around... so satisfying, kinda like a black epoxy. A week later. Finnished with a full can of clear. And then a wonderful happy accident happened. The clear finish dried up in a dry skin looking texture. So i decided to make the whole thing look like that. Now, when light hits the base. ✨️✨️✨️
So nice.
RIG, Mr. Bob Ross.🌌
I'd be scared a car broadside that thing and it swing around and take my leg off. Looks a bit dangerous.
You missed out the most important bit. How do you connect the trailer to the hitch. If you have to connect it to the pin well that`s not very safe especially if you have your dog in the trailer. We need to see it CLOSE UP while your manouvering the hitch not 10 yards away. So you connected your hitch to the saddle stem and put your pin in to secure it and said "that`s it set to go" OK but what comes next is to know where you connect the trailer to. The only place I see is the circular part of the pin. Come on Backwood show us properly and finish your demo off by connecting the trailer to which part of the hitch CLOSE UP. Why pay more you ask, well to be sure the trailer does rip the pin out of the hitch.
I know. It was a bad move. I neglected it because, in my head, it was a follow-up video, and I just failed to repeat the hitch connection. It is shown in this previous video. Just skip to the hitch part.
ua-cam.com/video/Bu2f29JWAV4/v-deo.html
@@backwoodbasics9383 OK got it thanks, if you get your fingers out of the way.
zipties are cheaper and faster.
how does it hook to the trailer's tongue ?