could you please send a closeup pic of the wire harness which connnects to the main pcb so that I could find the socket on pcb of the two wires. I have got dc92-0047D instead of dc92-0047A which is the main board for machines with the t3 sensor. I hope I may be able to simulate the signal(t3 sensor input) once I know exactly whereit goes on the pcb. My machine does not hae the t3 probe nor the wire connector because of an earlier model. Thank you
Hello I need your help. My machine is exactely same as the one on your video. My errer is TE3. The main control bord was dead. All was off. I change it for a new card. Now it turn on but display TE3. I have not the same connector of yours on the wiring. Can you tell me what is wrong with my samsung Washing machine ?
@@geoxtectechnologies3607 thank you for your reply. Problem sorted now. I got a wiring diagram and managed to put a resistor across the required terminals(pins) to simulate as a sensor & the machine started. You are correct I ordered a slightly different p/no. One guy who's doing a youtube channel from Brazil sent me the wiring diagram. Great guy.
Hello. Thank you for your complete explanation
Glad it was helpful! Please subscribe to my channel
Perfect. Thanks!
Glad it helped please subscribe to my channnel
Thanks you are the best
Glad it helped please subscribe to my channnel
simple, understandable
thanks for the video
Glad it helped please subscribe to my channnel
Mil gracias.
Glad it helped please subscribe to my channnel
@@geoxtectechnologies3607 yes
could you please send a closeup pic of the wire harness which connnects to the main pcb so that I could find the socket on pcb of the two wires. I have got dc92-0047D instead of dc92-0047A which is the main board for machines with the t3 sensor. I hope I may be able to simulate the signal(t3 sensor input) once I know exactly whereit goes on the pcb. My machine does not hae the t3 probe nor the wire connector because of an earlier model. Thank you
Hi there sorry for the delayed reply i have been offline for some time i will try and assist as soon as i can
👍👍
Hi, what about TC1 ERROR how can i fix it? Thanks
Morning.sir.want to know.how.tu remove.pc board on defy 148 top loader
please follow my channel for more if you haven't yet ill make a video
Hello
I need your help.
My machine is exactely same as the one on your video. My errer is TE3.
The main control bord was dead. All was off. I change it for a new card. Now it turn on but display TE3.
I have not the same connector of yours on the wiring. Can you tell me what is wrong with my samsung Washing machine ?
I have exact same machine but doesn't have a te3 sensor. Harness not having routing on it. I changed the board but now have this te3 error.
You might have replaced the board with a wrong one coz there is 2 different machines .one comes with the 3rd sensor and the other doesnt
@@geoxtectechnologies3607 thank you for your reply. Problem sorted now. I got a wiring diagram and managed to put a resistor across the required terminals(pins) to simulate as a sensor & the machine started.
You are correct I ordered a slightly different p/no. One guy who's doing a youtube channel from Brazil sent me the wiring diagram. Great guy.
¹😊
On load.shed machine stopped.and smoke.came out.front..smell.like.burn wire