Sorry for the delay reply. If you need one I have one for sale no mercy on UA-cam MHZ no mercy 62 inch RC boat check it out get back to me if you’re interested in buying
Big bucks. Love the whole setup. Wonder how well the outdrives hold up. I had a 55 apache from aeromarine & got rid of it. That was a mistake. Bonzi needs to make a 50 inch. Either way you have a beautiful boat. Scale as possible. Thanks for sharing.
Thanks for the kind words. This boat is so awesome worth every penny . If anybody interested I have no mercy for sale if anybody wants to buy it check it out on UA-cam MHZ no mercy 62 inch RC boat
Hello very nice indeed. Question: what is the total price for what we are looking at. I had an original performance model 60” Apache little Cesar’s pizza V. Bought it in Miami in the early 90’s for $2500.
5500 not including shipping nice indeed, and it has treated me well love the scale interested in buying it. I’ll make you a good deal and make me an offer. If you’re interested, send me a text 407-467-2309.
How often do you have to rebuild the drives or replace gears? I just finished a scale MHZ Mystic 240 build of the black Budweiser Select boat and love everything scale. There isn’t a lot of feedback about these drives online, I’d love to get your opinion in more detail of them. Would love to build an inline setup with gearbox and twin drives to scale of the black and yellow SV53 Outerlimits of Doc Janssen.
Drives are great easy 3 gallons of gas before you have to replace them depend on how hard you run a boat and how high your RPMs I find that the drives are nice can rebuild them yourself if needed you don’t have to send them out for repair. You can do it yourself same with the gearbox might be replacing bearings every now and then cause they were out after about five or 6 gallons but that’s a long time. Lots of runs Good luck with the build send me some photos of your stuff can always text me 407-467-2309 would love to hear from you. Thanks.
I have had two Arrowshark drives on the same boat for 10 years , Key is the oil, 75% merc high performance gear oil and 25% Lucas heavy duty oil stabilizer , Change after a days use. 0 ware on gears and bearings . I removed the bearing seals on the down shaft so the drive shares upper and lower case oil . I also put a drain grub screw in the lower case so as to fill from bottom till it comes out the top fill screw just like real drives. No maintenance. P.S. I use a monoject syringe to fill from bottom found at CVS
Sorry for delay sterndrives are great maintenance is so easy depending on how you drive it they will hold up for a good three or 4 gallons Might strip a gear every now and then but they sell parts which is nice I have a remote starter on it now so good. Get one
I have quick draws what kind you’re looking for twin in line mod3 mod4 high-performance call Bonzi Sports they would know how to answer your question a little better. Hope that helps
@@russellsvideos7260 Thanks for the info , as I didn't want to have to drill to many holes :^) the boat is 1800mm long its the 2001 SCARAB AVS I just closed the mold top deck /hull this morning it's in the oven for 48hours @ 40C, can I post photos on this channel ? if not let me know how? thanks
Did you wind up buying one what did you get did you want to buy.. I got a good deal for you when you’re ready I got three of them if you’re interested in buying
Team Apache, what a great boat! Thank you for the wonderful video!
Awesome machine! Great scale look with the outdrives, drivers, dash, etc. I want one of those.
Very cool thanks for looking i love the scale look to call Bonzi Sports U can get one cost a pretty penny but worth it
amazing dream boat right here
Extra.❤
I neeed one. The arrow shark drives are so cool
Sorry for the delay reply. If you need one I have one for sale no mercy on UA-cam MHZ no mercy 62 inch RC boat check it out get back to me if you’re interested in buying
That’s cool as hell
Thanks it’s for sale if you know anybody interested
Wow awesome thank you and it’s nice and loud to
Big bucks. Love the whole setup. Wonder how well the outdrives hold up. I had a 55 apache from aeromarine & got rid of it. That was a mistake. Bonzi needs to make a 50 inch. Either way you have a beautiful boat. Scale as possible. Thanks for sharing.
Thanks for the kind words. This boat is so awesome worth every penny . If anybody interested I have no mercy for sale if anybody wants to buy it check it out on UA-cam MHZ no mercy 62 inch RC boat
Nice boat
That’s awesome nice comment thank you
Hello very nice indeed. Question: what is the total price for what we are looking at. I had an original performance model 60” Apache little Cesar’s pizza V. Bought it in Miami in the early 90’s for $2500.
5500 not including shipping nice indeed, and it has treated me well love the scale interested in buying it. I’ll make you a good deal and make me an offer. If you’re interested, send me a text 407-467-2309.
@@NewTrip_NewAdventure I bought it and had a custom built from Bonzi Sports. Are you interested in buying?
@@NewTrip_NewAdventure yes !
I like it
Hey cool looking!
wow awesome thanks for the reply
How often do you have to rebuild the drives or replace gears? I just finished a scale MHZ Mystic 240 build of the black Budweiser Select boat and love everything scale.
There isn’t a lot of feedback about these drives online, I’d love to get your opinion in more detail of them. Would love to build an inline setup with gearbox and twin drives to scale of the black and yellow SV53 Outerlimits of Doc Janssen.
Drives are great easy 3 gallons of gas before you have to replace them depend on how hard you run a boat and how high your RPMs I find that the drives are nice can rebuild them yourself if needed you don’t have to send them out for repair. You can do it yourself same with the gearbox might be replacing bearings every now and then cause they were out after about five or 6 gallons but that’s a long time. Lots of runs Good luck with the build send me some photos of your stuff can always text me 407-467-2309 would love to hear from you. Thanks.
I have had two Arrowshark drives on the same boat for 10 years , Key is the oil, 75% merc high performance gear oil and 25% Lucas heavy duty oil stabilizer , Change after a days use. 0 ware on gears and bearings . I removed the bearing seals on the down shaft so the drive shares upper and lower case oil . I also put a drain grub screw in the lower case so as to fill from bottom till it comes out the top fill screw just like real drives. No maintenance. P.S. I use a monoject syringe to fill from bottom found at CVS
Beautiful boat. How are you liking the stern drives? And is maintenance hard on them? Looking at getting those or arrowsharks direct drives.
Sorry for delay sterndrives are great maintenance is so easy depending on how you drive it they will hold up for a good three or 4 gallons Might strip a gear every now and then but they sell parts which is nice I have a remote starter on it now so good. Get one
Twins!
Love it so good if you’re into that kind of thing. You get any yourself
Looks great. Now run it in correct water conditions. Like 6-8 inch chop. It would look great running in rough water.
thanks for the reply and the great comment. Would love to run it open water that would be cool with some more waves ha ha stay safe everybody
Hey bud sweet boat messaged ya a few ago
Hello there you the one on eBay
have a nice boat for you if interested text me 407-467-2309
Mantap
What motors do you have in this RC boat please comment back thank you very much for this video
I don’t have any motors at this time all sold out last one sold yesterday contact Bonzi Sports he’ll hook you up
@@russellsvideos7260 What kind of motors are they though
@@russellsvideos7260 What size and what is the name of Them please comment back
I have quick draws what kind you’re looking for twin in line mod3 mod4 high-performance call Bonzi Sports they would know how to answer your question a little better. Hope that helps
Zenoah twin in line Mod4. Do you want to buy my no mercy $4500 free shipping
Hi I'm about to install the M8 twin drives, in you video it looks like the centre of prop is level with bottom of hull is this correct ?
thanks
That is correct maybe just a tad below so you can angle the props up more RPMs, if needed Send some photos love to see it
Call or text anytime send some photos by text would be great 407-467-2309.
@@russellsvideos7260 Thanks for the info , as I didn't want to have to drill to many holes :^) the boat is 1800mm long its the 2001 SCARAB AVS I just closed the mold top deck /hull this morning it's in the oven for 48hours @ 40C, can I post photos on this channel ? if not let me know how?
thanks
@@noitatic5 absolutely post some pictures send me some photos,videos see what you got. Keep in touch.
I don't have a mobile phone so I can't text you is there a email address ? so i can send photos
thanks
👍🦅
thanks for looking great reply keep the RC going. Stay safe
what is top speed , when trimmed out....btw sweet boat
45 not bad for a scale. Nice and loud to ,,Thanks for the comment
How are the Arrow Shark drives holding up?
Sorry for the delay the drives hold up great
very nice boat..Who makes the hull?
Thanks. Bonzi Sports check them out get one so cool
Found it.. amazing boat
Nice set up what is the RPM at the prop?
thanks
Good question not sure we’ll have to find out
Gear ratio is 1 to 1
Any reason why you run backwards lol?? I take you haven’t EVER even tried entering a race ?
Any reason why you can't see he's having fun lol?? I take it you haven't EVER even tried having fun?
@@TS34675 I take it you live in your mom’s basement most likely? I take it TS stands for? Fun? 😂🤣
NASCAR is cooler than RCs and they turn left..soo I’m giving the guy a pass. Not EVERYONE dives all in on RC..
@@Vulcan650Vampire not on all courses lol you are talking about old school nascar🤣😜
Speed? I’m looking to buy one, or an enforcer
Did you wind up buying one what did you get did you want to buy.. I got a good deal for you when you’re ready I got three of them if you’re interested in buying
send me a photo or some video that would be nice what did you wind up buying or did you
@@russellsvideos7260 sorry didn’t see your reply and no I have not purchased yet, been toying with a friends traxxas dcb
HOW DO I GET ONE?
They’re not cheap I have one I can sell you if you’re interested