How to install a performance air filter on Chinese Scooter
Вставка
- Опубліковано 11 вер 2024
- NIBBI High Performance Intake Pipe amzn.to/3vzm8ow
Air Filter 44mm size amzn.to/3b4LLmz
Chinese Scooter Service Manual amzn.to/2LBfWb8
Donate to Virberello for Parts rb.gy/gzrtit
subscribe to my youtube channel bit.ly/2Rcxr41
Hello this is a easy thing to do for a little more performance for your Chinese scooter taotao, motorcycle and more
I’m going to show you… HOW how how how!!
FYI, if your using foam filters, buy some foam filter oil. Yes foam filter oil it helps the filters preform better.
Hello John thank you for sharing your knowledge with us and thank you for watching my video
It will definitely make your scooter louder. Make sure to oil to keep out dust. Happy riding Virberello!!
Hello my friend thank you for watching my video
Hey man what do I oil it with? It rains a bunch in Florida so it would help
@@nico2635 regular engine oil is fine, it won't be getting sucked into the engine :)
Dude, brilliant! Im going to try a short extension though.
Thank you for your awesome videos!
Thank you for watching my video 👍
Yes I definitely needed new jets when I tried this because it does start to "hiccup" down the road.
Hello Gregory thank you for watching my video
@All Seeing Eye that’s not true mate, you make mopeds faster by up jetting and a high flow air filter
@All Seeing Eye with proper performance exhaust, jets and tuning a small pod can be beneficial for a race setup, but for road tuning standard is more than enough. Save time, money and effort, drill holes and get some rubber plugs for tuning
Hey there my Florida friend I have the same one my filters different but I had to buy it twice I learned the hard way it vibrates loose I put a small zip tie around the pipe and ran another zip tie under that zip tie and around that top frame piece and I have not lost this one yet and I've had it for over a year thanks for your video my friend just thought I would let you know because if it falls off going down the road you'll never know it that's what happened to me👍
Hello my friend I will place a zip tie tomorrow to make sure is going to stay in place . Thank you for watching my video
@@VirberelloScooterTips love your videos my brother I just wanted to make sure you knew did not want you to lose money👍
I love your videos. They are very helpful. Can you do one on front turn signals on a taotao
Thank you for watching my video and Happy Holydays
You got a motor on your scooter? What's your power source? I think you have an engine. 😁
What did you do with the tiny hose that came off the back of the airbox and connected to the gear casing?
The hose that connect to the valve cover you can place a little filter or you can keep connected to the old air box
2:00 cops drive by
Is scooter air filter good enough for really dirty roads where is dirt and sand everywhere ?
A standard scooter air filter might not be sufficient for extremely dirty roads. Protective covers can also help keep dirt and sand out. Proper maintenance and suitable filters are key to protecting your engine.
@@VirberelloScooterTips Thx very much
Hello super helpfull friend i recently put a cone filter on my gy6 150cc with a performance exhaust and i was wondering what size jet to put in my carburetor thank you for all your help and answers
Hello my friend if you have a 150cc gy6 motor and your location is at sea level you can change your main jet to #120 but if you live little higher in altitude every 1000 ft go one step down on your main jet . Thank you for watching my video and be safe
what about the hoses that are connected to the air box I have 2 hoses that connect
Hello my friend if you do not move the airbox keep the hose connected with the box if you like to move the air box you will need a Oil Separator Catch Reservoir amzn.to/2ZGMHKt check this video ua-cam.com/video/tKqw7ZBqAWY/v-deo.html. Thank you for watching my video
@@VirberelloScooterTips Thanks man
You do amazing job mate. Thank you🛵🛵🛵
Hello my friend thank you for watching my video
Perfect!! But do that reduce performance because it is smaller than stock one?? Thank you so much my dear.
Hello in Italy we say in the smaller barrel there is always the best wine ah ah ah Just try to believe it my friend this small filter can pass more air better then the big stock one . Thank you for watching my video
Hello, super helpful video. I also have a pod filter on my 8y6 with 80cc bore kit, valve spacing is perfect. But wondering what size jet you reccomend. I have #96 in right now but it hiccups on bumps in the road. And anything less for jet seemed to make it run lean (white spark plug)
Hello my friend many time is all about test and tuning you can try to go little higher on the main jet and see. keep in consideration your altitude and humidity at your location. Thank you for watching my video
Hello my friend Verberello I have a all stock icebear Hawkeye 150cc scooter I purchased a 26 mm carburetor for it on Amazon I want to install this filter you show on your video here at the end of your video you mentioned to keep in mind if you install this super flow air filter you will need to go up 2 sizes in jet ..? Which jet are you referring to this area is new to me I appreciate your help thank you
Hello my friend if you place the performance air filter you will have to balance the fuel and air so you will need to change the main jet inside the carburetor at list you need to place a #115 or # 120 if you are at sea level . Thank you for watching my video
Thank you for this great info I really appreciate it 😁👍
Great nice video the new filter you fix now is any problem if the filter be wet when you drive in road wet thks
Hello Abel when is raining the filter is not performing at his best I try to cover the filter with a clear plastic but at that point I lose a little performance . thank you for watching my video
After this we need more petrol and less air in the carburator ?
Hello you will need to rejet you carburetor to a higher jet. At list a #115 or # 120
But then what about the black air box it used to lead to does that get removed?
With the air box I was thinking to make little tool box
What do you do when it rains because I know you live here in Florida? Also, do you think if I get a foam uni filter and oil the outside layer the oil will repel the water?
Hello Mike yes oil will help a little but you know in Florida we have those 10 to 15 minutes crazy showers so I wait a little to go with the scooter but the scooter will work but if the filter will get wet will not perform at his best
@@VirberelloScooterTips thanks brother
What if you have a 4stroke scooter. I don't think that the carb has a fuel adjustment.
Hello my friend my scooter is 4 stroke scooter and if you change the air filter you should reject and adjust the carburetor to keep the balance between air and fuel
So I did the air filter and the exhaust. What jet would I need .I have 150cc wildfire scooter.
Hello my friend if you leave at sea level in hot. Weather location you will need a #120 main jet but of your location is higher in altitude you need a smaller jet . Thank you for watching my video
Thank you
What air filter tube size are you using? 39mm? I have similar scooter.
Hello Marco check this amzn.to/3hiFlFq will give you all the measure but the air filter in that video was a 42mm amzn.to/35e6XJk
Does anyone know if you need to put filters on the hoses connected to the air box ? I don’t think it’s just my scooter
My air box is attached to the cvt. There are a couple of vaccum lines. What do we do with these?
Hello my friend one should go to the valve cover one clear hose is the reservoir and you have the big hose that goes on the back side of the carb that is how it goes on gy6 scooters
@@VirberelloScooterTips thank you sir
My 150cc got kart 2 wires to the starter solenoid are hot. I’ve already replaced the solenoid 3 times so I don’t think that’s it. The 2 wires stay hot the whole time it’s running. It will start and run but I have to hit start it because when I turn the key it only clicks. So after a hot start I’m golden I just unplug the starter solenoid and I’m good and wires aren’t hot anymore.
Hello my friend that feel to me like a short inside the starter motor you can try to open the starter motor and clean and inspect the inside but try to do not damage the starter inside wire you can clean the inside with a electronic cleaner spray but that can also be a rusty solenoid inside corrosion and that will be a 10 dollars or less online to replace
@@VirberelloScooterTips I’ve replaced the solenoid 3 times but could a short from the key to the rear be giving it constant power
I don’t think but anything is possible if you can after you turn the scooter disconnect the solenoid not from the two 10mm but from the little connection that goes to the front or you can test with a multimeter if you see any voltage coming from upfront
Also if you have a multimeter make sure the motor is grounded
@@VirberelloScooterTips so if 1 of those wires have power then it might be cut or something
Ok I did all this but my bottom of my carb screw is so hard to loose I don’t own a power drill 😂
I just put a pod filter on my 150 gy6. I was wondering what you did with the vacumm lines attached to the original filter. I changed my main jet to 110 but my scooter is still bogging really bad at low-half throttle. any suggestions?
Hello Makai for now I left the valve cover hose breather connected to the stock filter but you can buy a baby filter for that or a catch can.
About the bogging I will up jet a pilot jet to #42 and the main jet to #115 is also about your altitude id you are above 2000 ft or at sea level plus I will check the valve clearance to .Thank you for watching my video
@@VirberelloScooterTips are you saying that you just left the original air box for the stock filter on when you replaced the stock filter with the high-flow filter? So that there would still be vacuum?
Anytime there is increased airflow through the engine (aftermarket filter/exhaust) you need to richen the mixture. Try going up one one size on the pilot jet and 1 or 2 sizes on main jet.
How do you make the air filter waterproof do I head use wd 40
I would not recommend using WD40 on a air filter but I use K&N Air Filter Oil: Aerosol to protect the air filter and it works great. amzn.to/40k7JwI
@@VirberelloScooterTips yea did sum research thx man
What jets should I be installing if I do this? Im new to all this just need the exact jets I should buy and install
Hello jet size charge according to your location altitude but if you place a high flow filter you can place a #120main jet if your location is a sea level . Thank you for watching my video
@@VirberelloScooterTips im in canada
@@Itsyaboyd.wav666 Wow my friend there is cold so the best main jet is around #100 because of less air density
@@VirberelloScooterTips okay thank you ! Ill only be riding it in the spring when the tempeture gets to around 10 degrees celsius in march or april then it will get hotter in the summer, roughly 25 degrees celsius to 40 degree celsius! Our weather changes every 3 months lol
I just installed it but I took it off, I guess I had too much air and not enough gas, how can I figure out the ratio without changing them all the time until I get it right??
Hello
I really like your channel because these are good video’s with good instructions. I also like that you reply to most of the comments.
+1 subscriber.
I have a question.
I have a Kymco agility 50 but it accelerates pretty slow. What should I change to make it accelerate faster?
Hello my friend to a Agility 50cc you can try to change lighter roller weight at the variator , place a performance air filter , reject the carburetor but at the end all this changes will do a little change in your scooter performance because is a 50cc and the combustion chamber / is small unless you place a 80cc kit . Thank you for watching my video
virberello GY6 Scooter Tips thank you for your comment. I wil try your tips. Thanks a lot.
hey i have a question so i have the stock airfilter and the stock airfiler has a whole in middle of the tube with a line on it, do i need that line on the carburator ?
Hello no you can plug that hose you do not need to put on the carburetor
@@VirberelloScooterTips SO I DONT NEED THAT LINE ON IT RIGHT?
Will this work on a 50cc Chinese scooter ?
Hello yes but make sure you get the right size for your scooter carburator
Great video. I'm about to do this but sometimes I will need to ride in the rain as I live in Florida and it rains one minute then it's sunny the next. Any ideas on something I can throw around the filter like some kind of makeshift box or something for when it rains that I can just pull off when it stops raining?
Hello Mikey you can cut a plastic bottle and make a cover or one time I made a cover with a plastic cup.
Thank you for watching my video
I was thinking the same thing but I figured you had already done this. Thanks a lot man I subscribe to Great Channel
Just use a hydroshield
I upgraded my air flow filter and exhaust but now I just don't like sounding like a motorcycle anymore. Which part or parts should I reinstall to quite the sound.
Hello Robb start to put the old exhaust back for the sound
@@VirberelloScooterTips yes sir, I'll work on it tomorrow and let you how it went. Thank you bro, again you are the best PERIOD!!!
Hey it's me again. Could you please recommend a carb jet kit because I am going to install a high-flow air filter and exhaust. Could you please recommend all three and where to get them? It's for TaoTao 150 brand new. Do you think my carburetor is one that will accept these new Jets? Thank you I love your Channel.
Hello Mikey goodmorning check this links
Carburetor Main Jets kit amzn.to/3bECZeE
Intake Curve Pipe amzn.to/2WBQFCX
High Performance Air Filter amzn.to/2Tb3zGb
I hope this can help you
@@VirberelloScooterTips what about the exhaust? I like the shorty exhaust but I'm not sure if the ones on eBay are going to be garbage or not and I'm not looking to spend a lot of money as some exhaust would be a fifth of the price of the whole scooter. Thanks a lot brother.
Hello @@fatmikesvapemotoandtech.3240 this is the system i have at the moment amzn.to/2ZfhHSA but i had a big problem putting it in because the flange was not flash so i had to bend the pipe let me tell you all the exhaust for the gy6 scooter are garbage very low quality you can also buy great quality but you have to spend 350 dollars and I do not think is a good idea on a 1000 dollars scooter so the system that will last you longer is the stock one and the others will look good and they will last you 1 year or 2 max so try to spend around 40 to 80 dollar and have fun for a little beat until the exhaust will follow a part and them you can buy another style
Hi,
where did you pull the crankcase hose that came in the original air filter box?
Hello the first time I left the hose connected to the air box and after I install a reservoir with a baby filter check this video ua-cam.com/video/tKqw7ZBqAWY/v-deo.html thank you for watching my video
gonna do it with a 4 inch pipe so the filter sits under the seat, make it more rain proof
Great idea thank you for watching my video
What did u do with the small hose that runs from your engine to your air filter since you didn’t connect it
Hello Cortez I placed the hose back under the old filter or if you like you can buy a catch can or a baby filter and place that hose at the level of your under seat frame. Thank you for watching my video
Hello friend my china 80cc scooter I already make 0.90mm main jet (before 0.80mm). I have performance air filter. I make Air Mixture close clockwise side and after open 3 turn open , but Throttle does not respond after 50 km speed.motor chokes. makes forward-backward movements. I thınk I faild mixture settıng. Which Side I turn air setting? open more air or more clockside close ? Thanks much
Hello Abatros try to only turn the screw 2.5 turn and if you live in hot place and at sea level you can try slightly place a larger jet but I have the feeling that your problem is the flow of gas is to slow try to see if the fuel hose if it is bended or twisted
@@VirberelloScooterTips 2.5 laps of the air setting.but it doesn't go past 60km. It's the same problem I tried by turning it 2 laps but same . I took the carburetor needle setting from 5 stages to 3 (revealed), but the problem remains. There was no such problem before I enlarged the main jet.it was more performance.I checked the gas hoses, no problem. The mileage of the engine is only 500.
Hi where can I buy that extension, because I bought two air filters but I could not find an extension
Hello you can buy a nibbi curve extension on Amazon or you can buy a large hose at auto part store and you can make a custom made one
What about the vacuum line; I didn't see where you connect it
Hello my friend you do not need to change the vacuum line connection unless you think about the valve cover breather line that can stay connected to the old air box or you can place a small baby filter on that line thank you for watching my video
Hi. Great vid as always. Do u have an idea of how to stop the water getting into the filter when it's raining? I live in England!.. Thanks again....
Hello John one time I cut a plastic bottle and made a cover but when rain to hard there is to much rain mist in the air
They actually sell waterproof performance air filters. They have a cover already attached to them
Hello freind where i can buy one like that?@@spawnedcurse
@@Youcefdjezzar98 Amazon used to have them. That's where I, pretty much, got all my parts from.
@@spawnedcurse thank you brother can you sent me a link to the parts
I have a 1p39qmb 50cc with no frame but idk which one goes to my carburetor
Hello my friend I'm not sure on 50cc just search on line performance air filter for 50cc and make sure to measure the connection I think is 35mm or 38mm but not sure 100% . Thank you for watching my video and Happy Holidays
I have a dong fang 200sst, would this work with my bike?
Hello my friend It should work but you need to check the measure of the carb for the air hose
Great videos sir !
Since I live in a are where it rains alot would u suggest a uni filter instead of yours?
Also is 44 mm the size uni I need for this intake ?
What about the vacuum hoses connected to the air box set up?
Hey Maestro. Have a question for you. I just recently purchase a 2009 Crossrunner gy6 150cc it does not have a muffler or exhaust what kind of exhaust can I order for my gy6 150c? Thank you in advance.
Hello my friend I see on line that the Crossrunner gy6 150cc has the Complete Exhaust Muffler System amzn.to/33NDaq0 like the scooter I have at the momement but the crossrunner only has one holding bracket they have few others mufflers on partsforscooter dom com but the one little more reliable is the stock muffler
I have a Tao Tao Quantum 150 with the following mods on it
Big bore kit
Aftermarket exhaust
Aftermarket CDI
Uni filter
30 mm carb with a bigger MAIN jet (112) I believe pilot jet is STOCK size
The problem I am having is even after adjusting the air fuel mixture after my scooter runs for a little while it does not want to idle and keeps dying, also this seems to happen alot when I am going down a Incline:(
Ie the valves are adjusted fine and I am trying this nibbi on my uni to see if that helps.
Any suggestions to fix this problem??
Hello Scott I think the speed of the fuel running in hose is to low try to have a larger fuel hose and a better fuel valve or fuel switch and delete the fuel valve . Thank you for watching my video
Thank you for the reply. I will consider that and all of the stock fuel plumbing on my bike is stock. I have 2 filters on it and I can see the fuel running fine through the system too...
Do u think if I changed the PILOT jet out that would affect anything on it?
@@scottbaddley72 hi dide ur try tye nibi ?
I have a 150 cc go cart and Was wondering my old air filter box had two hoses they ran to it from the crank case and from the valve cover which I vacuum but if I put an aftermarket filter what do I do with those hoses that have vacuum
You can combine them a place a little filter
@@VirberelloScooterTips perfect I got my go kart running my next question is how come with it running the starter solenoid is super hot. Also in order to get it started I have to start it by jumping this solenoid
@@Martyimgay There is a possibility that you need a new selenoind and if you had to start by jumping or the selenoind is funcioning right or the starter button is not giving any voltage to the selenoid
@@VirberelloScooterTips ok got it but when it was running like 10mins the solenoid was super hot and so was the wires
What did he do with the fuel filter hose he took off ??
How did you hook up the breather for the rocker cover with this cold air intake
Hello my friend you can keep that connecter to the old air box or check this video ua-cam.com/video/tKqw7ZBqAWY/v-deo.html
Any hi flow filter that works good in rainy weather ? Or tips for riding in the rain
Hello one time I cut a large clear plastic bottle and place in top of the filter and that was protecting the filter from the rain
you could find a hydrophobic filter cover that fits your filter best and that should fix your problem
My moped turns off when I hit the throttle and it doesn’t catch when I try the ignition ,it barely starts with the kickstart. I need advice please
Hello Icarus 2 things if you have a 150cc scooter first check the valves clearance and second clean the carburetor main jet. Thank you for watching my video
Virberello Scooter Tips yes it’s a 150cc ,thank you so much for replying and np 💙
If you put a coke bottle plastic over the filter and make holes in the right places you wont get water in. Try it
Hello my friend I try and that help a little but the water mist still limit the filter performance one day I will find the right solution and when I make that perfect I will make a new video
@@VirberelloScooterTips While I have tested it on pitbikes and other motorcycles maybe it does sit too low on a scooter. 🤔 Thanks for the tips on other stuff anyway. 👌🏻😎
Hi can you send me the link for this air filter and extension please i am having trouble fitting mine
Hello my friend amzn.to/3qS8pXH thank you for watching my video
Hi - any thoughts about if this will work on a 2011 Saga Benzhou Yy50q bike? I'm having a tough time finding parts (air filter and rear brake shoe).
Hello I 'm not sure if is ok for Saga Benzhou Yy50q
Hello ! I'm new to your channel ! I recently subscribed! I was wondering what size did you go with? I see 3 different sizes on the website: 38, 44, & 50mm
Hello Royaltybuiltco the filter is a 44mm remember if you live in a area where rains a lot this style filters do not like rain thank you for watching my video and be safe
@@VirberelloScooterTips thank you! Also how do you keep your motor cool if I don't plan on changing the jet?
@@VirberelloScooterTips so how do you deal with the rain? I live in FL also.
Great content!!
Hello my friend thank you for watching my video
What about the video that comes after installing the air filter upgrade
After rejetting the carb and installing the performance air flow filter, the scooter ran great. However, my weekly gasoline expenditure increased from $5 to $9, raising my annual cost from $260 to $468. Additionally, having an exposed performance air filter poses a problem in the rain, as a wet filter won't perform optimally. Despite these drawbacks, a performance filter is a cool feature for a racing-style scooter. Thank you for watching my video
How does one rejet the carb though I took it to my mechanic but there is still a pull back in power and air fuel mixture how much turns left or right?
@@Quizmasterchannel-co1uq to reject the carb you need to open the carb and place a little larger main jet check this video ua-cam.com/video/DfIpD0KanZg/v-deo.html if you say left or right I think you are thinking about the idle mixer screw
Idle mixer screw yes I took it in for them to see it’s sort of better it couldn’t climb above 6K rpm after sending it to them I managed to get it to 7k rpm with the standard filter I was getting to 8K rpm so I thought maybe I could adjust the idle mixer screw but damn do you know where I can get jets for a 170cc scooter on Amazon buying the correct the product would help alot thank you so much for your time your content is so helpful 🫡👌❤️
@@Quizmasterchannel-co1uq Hello if your motor is JN1P57QMJ gy6 150 cc this are the jets amzn.to/3WN9RvJ but if your scooter is not a gy6 you need to open the carb and check the jets shape if your scooter is 170cc you can change your pilot jet to a 40 and the main jet to a 125 but at the end because everything is related to altitude and yearly average temperature and humidity is all about test and tune to get best performance on your scooter
please help. i installed a new carb with a pod filter like you on a 50cc and there’s a size 80 main jet in it and it runs evens worse than the stock carb and stock air filter i could go 40 now i can barley reach 30. when i give it throttle it wants to gain speed but i just feel it lose a ton of power after a little bit please help
Hello Cedric if you are at sea level you need to upgrade your main jet to # 85 if your location is above 1000 ft with colder weather you need to go lower then your main jet less then #80 or you have a fuel unbalance
my elevation is 1,099 so use an 85 jet?
When rideing scooter ok but when i try to reach top speed on my 150cc zapp which is 80 km rideing for about 10 seconds fully opened it wants to cut out so i decelerate its ok but up a hill will cut out please help southafrica
Hello my friend I have a feeling that is the sparkplug try to buy a iridium spark plug or check the sparkplug coil and test again the scooter
@@VirberelloScooterTips hi replaced spark plug new coil lead still the same thanks for all your wonderful work could it be the carb southafrica
@@servantoftheservant5022 many things can happen at that speed even not having a good fuel speed supply inside the hose try to bypass the petcock fuel valve and go for a test ride that can make a big difference at that point you will need a better quality fuel valve or a manual valve
I have 2 small tubes going into the filter. One is clear with a cap at the end that is coming only from the air filter box ( i am assuming that just goes away) and the other is going into somewhere in the bike. What do I do with the one that is connected to the bike?
Hello my friend the one is connected with the bike goes to the valve cover in front of your engine
Hey man. I have a powermax150 taotao..... I put the exhaust you recommended on it and I put the air filter on, and produces very loud popping after I’m on the throttle. Suggestions on jetting? Any recommendations for a aftermarket carb?
Hello I love the popping and at night time you can see popping fire anyway if you are at sea level just replace the main jet with a #120 and the popping goes away for the carb you can place a 26mm or a 28mm amzn.to/32lmZM4 and they are not to expensive. Thank you for watching my video
virberello GY6 Scooter Tips does the popping hurt the engine?
@@VirberelloScooterTips does popping hurt engine??
@@nycluvscars1527 Hello yes your motor will overheat and your exhast will be very hot and that will burn out or demage the gasket and seals and your motor will have a shorter life
hi my friend can you help me with a question I was fixing my moped and I forgot to put the air filter on it while I was adjusting the speeds for a long time, can this cause damage to my moped?
Hello Jay no that will not cause damage to my moped unless you ride without the filter for long time
@@VirberelloScooterTips thank you for the quick response. I watch all your videos you have helped me a lot thank you
where do you buy extension for carburator for powermax
hi how are you i put new rollers in and don the all enging but still no power in up hill please help
Hello Peter I hope you have a Gy6 150cc if you do make sure your air filter is clean and if you like you can up jet your carburetor main jet to a #115 or #120 Max that will give you more power
i have a new carburetor and a con filter
Where did u buy this?
Amazon check link under the video
Everytime I put the racing air filter on it runs like shit but if I take the filter off it runs great. What could be the problem?
Hello Daniel I think is the jets every time you play with air or fuel you need to have the perfect ratio of 14 part of air 1 part of fuel I think you need to place a smaller jets when you have the performance air filter and also depend on your altitude of your location
@@VirberelloScooterTips thank you ill try putting a smaller jet and see what it does
What size air filter is that 44mm or bigger? I looked at the link you put but it gives you 3 options
There is a 38mm a 44mm and a few other sizes which one is that?
Hello Ryan yes the filter is a 44mm for the 150cc gy6 carb
virberello GY6 Scooter Tips thank you!
How did upjet what size did you get them
Hello dragomxsoldier check this video ua-cam.com/video/DfIpD0KanZg/v-deo.html
Do to having a high flow performance exhaust and a high flow intake and air filter, since I obviously have to go up on the main jet but I can't because it's a stock sealed carb. Would I get any performance out of just going ahead and getting a 26 millimeter carb which is obviously Just One Step Up?
I wouldn't dare to put a high flow on any stock sealed carb, you just going to either have a really bad acceleration curve or blow the engine clean from the extreme heat cause by the leaner mixture. Learned the hard way :/
Hi again,
I asked you before, but know I have other problem.So I have a performance air filter, a bigger exhaust, a brand new Naraku 50-80cc carburetor with 84 main jet, all hoses and intake manifold new, but I can't make my 50cc 4t scooter to go round.
It starts very well, but when idle it keeps accelerate by itself and then decelarate and so on.If I accelerate myself at idle it accelerates good let's say, but after I let the throtle it gives sign to stop and then I have to adjust the idle screw to give more gas.
If I give more gas from that screw increases the acceleration.
I don't know what to do to go like it does before.
Could this be from the air filter?Should I oil it?
Or could be from the acceleration cable?But it doesn't seems to be broken or destroyed.
Thank you.
Sounds like you may need an valve adjustment
So what happens when it gets wet ?
When a high flow air filter gets wet, it can negatively impact the performance of the engine it is designed to protect. This is because a wet air filter can cause several problems, including:
Reduced Air Flow: A wet air filter can cause a restriction in air flow, as the wet media can clog the filter and reduce the amount of air that is able to pass through it.
Engine Misfire: If there is a lack of air flow, the engine can run lean, meaning there is not enough fuel being mixed with the air to keep the engine running properly. This can cause the engine to misfire, resulting in a loss of power and possibly damaging the engine over time.
Corrosion: A wet air filter can also cause corrosion in the engine, as moisture can promote rust and other forms of corrosion. Thank you for watching my video
Yh I had one and it started raining when I was out and the bike did not like it one bit
Hello Deepinsight1x yes that is the only problems this filters are not rain friendly
hi sir can i use this airfilter to i.f scooter?
Hello Jhon this filter are good for any scooter or motorcycle but you have to make sure you get the right size for your aplication
Can you still install the air filter without that
Hello Merjim Jimenez you need to have a nibbi curve or a hose extension because if you just place the filter you do not have room because the frame is to close to the carburetor. Thank you for watching my video
Hey my friend I have a question I finally installed new petcock valve, fuel filter and carburetor.. the problem is there is no fuel going into the filter it’s dry... I feel the vacuum working on the petcock but not enough maybe? I took air box off and still nothing I tried manually choking the air box hole and nothing ... The gas tank is on the bottom of scooter not on top gravity fed
Okay so i gravity fed some fuel to the carb and the scooter turned right over and stayed running... I flipped the o ring on the intake manifold because I thought maybe was losing suction and hooked back up the petcock valve the only thing is I still don’t see any fuel going through the filter and won’t turn back on now... I’m thinking not enough vacuum happening to suck the fuel into the carburetor what do I do next I’m stuck
Hello Joel I'm not to familiar with scooter that they have the gas tank on the bottom but I know that they have a little pulsating fuel pump like a Mikuni Fuel Pump what comes to my mind that you need to prime the fuel line system and remove air from the line to make the fuel flow in the line the best way is to place the hose lower then your tank and let the gas flow then close the hose and without letting the air in the hose again at that point connect that hose to the carb I hope this can help you
virberello GY6 Scooter Tips thank you so much for the help I will try this tomorrow and will let you know how it goes I believe you’re correct though because I did something like that and hooked it all back up and it’s starting up but not staying running probably due to the air in line
virberello GY6 Scooter Tips I tried priming the fuel lines/filter and as soon as I went to crank the fuel just dropped back down into tank when the petcock valve opened with vacuum... I don’t know what to do next lol if the tank was on top this would be no problem
I cannot find the performance intake pipe the link on amazon isn't there anymore
Hello my friend check this link amzn.to/3pyZcT7
Thank you very much your videos are very helpful
Thank you i ordered it will be here tomorrow
Wat cc is that scooter
Hello my friend my scooter is a 150 cc
Why not remove the stock air box?
Hello Jay good question !! so you pay attention to the video ah ah ah ah yes I did not remove the stock air box because if is going to rain a lot in Florida I will have to switch to the stock air box because the performance air filter are not rain friendly and when they get wet they do not breath anymore
Thank you for watching my video
virberello GY6 Scooter Tips thank you for your quick response. Haha yes I pay close attention because I’m repairing a Chinese scooter I ordered multiple parts based off your videos and I will be installing them this week. Good to know I was thinking maybe you kept it there in case you wanted to switch back. Thank you for the answer now I feel more confident going into the project 👍
I would remove the stock air box and just put a rain sock over the pod filter to protect it from water spray. Some have the airbox under the seat and some have the airbox outside above the CVT. Either way it reduces weight by removing it.
What Size Filter do I need for my 170cc Scooter?
I got the exact same one on my mine problem is I’m not getting the speed I need with the standard big box filter that come with the scooter I could get up to 8000rpm after that upgrade I’m stuck at 6 struggling to get to 7000rpm
You need a filter for your other line
Hello not sure what line but if you are talking about the line from the valve cover if you like you can place a small filter or you can buy a oil catch can Thank you for watching my video
I installed a powerfilter like that to my aprilia sr and the top speed dropped to 25 km/h
Hello Sputnik did you upjet your carburetor ? because now you have more air and less fuel so for best performance you need 14 parts of air one part of fuel . Thank you for watching my video
Why change it period,,leave your air filter alone
Hello Bill Stock filter is not fun ah ah ah thank you for watching my video
this guy potuguese?..cause italian language doesnt match english accent possibility
Hello my friend I'm Italian but I speak French + Spanish + English but one day I will love to speak Portuguese and Chinese too only time will tell ah ah ah anyway thank you for watching my video
Ok ok ok ok ok ok
Thank you for watching my video
What oil do I use on my carb filter.
Hello my friend K&N filer oil is great and is around $15 on Amazon