👉 Please enable subtitles in your language 👈 Thanks for watching 👍 After you watch this video ALSO SEE 👉 ua-cam.com/video/i1bYKZvVank/v-deo.html 👈 You will Enjoy ! Stay Safe !!
Thanks from Guatemala! I moved into a new house and there are several yucky yellow items I was afraid I would have to toss - now I think I can save them with this method.😊
Yellowing will return over the time the same way as from new. To stop this process again, after hydrogen peroxide process you scotchbrite plastic 500 or 800 grit gently, degrease with isopropyl alcohol and spray clear coat lacquer tiny coat
contrariamente a lo que se piensa el sol no es el causante del amarillo. Para probarlo, guarda el ordenador en una caja hermetica despues de limpiarlo y veras que en pocos meses estará otra vez amarillo. Otro producto que funciona igualmente es el Vanish en espuma.
Buen video, el agua oxigenada que usas es de 100 volumenes?? Yo probe con una de 40 volumenes que es como crema, lo puse al sol 3h y blanqueo muy poco, repetí la operacion y se pusieron mas amarillos, por que es eso? Puedo usar la de 100 volumenes
Hola, lo dejas al menos un dia al sol, o mas si no logras el resultado esperado. Si es pura mejor. La proxima ves activa los subtitulos alli explico los detalles. Saludos !
Paysandu, solía pasar mínimo dos veces al año por esa ciudad viniendo desde Entre rios hacia las playas del este. nada que ver con el peróxido de hidrogeno pero bueh, hermosos recuerdos.
Hello Mr., I was wondering: Can I also use a lamp instead of leaving it in direct sunlight? My balkony only catches a little bit of actual sunlight and that only for a few hours.
Hi! Thanks for the vid. I was wondering. You said to leave in direct sunlight for 6 hours. Do you rotate the containers or move the pieces around to get sun coverage on all sides?
You will bleach the canvas. This works on pvc PLASTICs. pvc canvas is cloth material COATED with plastic. For this o work, you have to submerge the whole surface in a liquid or gel, u cannot do this without wetting the fabric coated by the pvc.
heyyy...how does one get those super-fine old Microsoft keyboards to work on Windows 10? I've tried, and NO_WAY!!! I loved those boards, and great to type on, right? Help! Thanks!
Try to find a gel (it's used for bleaching hair so it's easy to find) apply it with a brush and wrap the whole thing with thin clear foil. But be aware that electronics maybe damaged!
I have some action figures that has turned yellow even though they were in storage instead of being in the sun. If I were to do this treatment, even though it would whitening them, would it also enforce the plastic so it won't be brittle?
no.. old plastics and rubber will get brittle or degrade you can enforce them with transparent resin.. but not guaranteed will work or making it looks like glossy
@@judasthepious1499 I figured as much. Whitening a yellowed plastic is one thing, restoring its actual structural integrity is something else. Seems like there's no way to restore the brittleness of a yellowed action figure aside from replacing the actual yellowed piece.
I've done this with bleach in the summer in the sun just whipping the surface over with bleach and leaving for about ten mins no longer as can eat away at plastic
I've done this in the past. I have plastic parts that are 20 years old that are still bright white. The yellowing doesn't return. Also it doesn't make the plastic brittle either. Both are myths.
The volume indicates the concentration of peroxide in the solution. 3% = 10 volume 6% = 20 volume 12% = 40 volume 30% = 100 volume 35% = 130 volume So this is 30%, because VOLUME is rear used, more used is %
👉 Please enable subtitles in your language 👈 Thanks for watching 👍
After you watch this video ALSO SEE 👉 ua-cam.com/video/i1bYKZvVank/v-deo.html 👈 You will Enjoy ! Stay Safe !!
Thanks from Guatemala! I moved into a new house and there are several yucky yellow items I was afraid I would have to toss - now I think I can save them with this method.😊
Yellowing will return over the time the same way as from new. To stop this process again, after hydrogen peroxide process you scotchbrite plastic 500 or 800 grit gently, degrease with isopropyl alcohol and spray clear coat lacquer tiny coat
I think the yellowing its triggered by UV so a clear coat that has a UV blocker is probably the only thing that will work.
P
@@CallousCoder
Thank you for the tutorial. I'm heading out to buy my drogueria paysandu. Can't wait to see the magic.
Have fun!
Thank you. Cool
Hola, gracias por el truco.
Cómo limpias los bordes de plástico que están pegados, ejemplo: los bordes de una guitarra?
Soy de Quito-Ecuador.
Great thanks 👍
Amazing.
From Hong Kong
thanks from France ! 😀
Merci !
From Illinois USA! I'm about to try this with a SNES that I was given for free, hope it works! 🤞
Wish you succes on your work !
very happy for your result too
Thanks for watching 👍👋
使い終わった過酸化水素はどのように処理すれば良いですか？流しの排水溝はダメな気がします・・・
Hydrogen peroxide for anyone (like me) who did not understand what this 'works like magic' stuff was. Apart from that, great video.
It was in the subtitles / captions (the little CC icon on the video).
Сlorinated water is most effective. A liquid with chlorine gas odor.
Thanks
Thanks? Aqua oxigenada = HP. Amazing! But HP is not oxygenated water. In Spanish, "Hidrogen Peroxide" translates to "Peróxido de Hidrógeno."
@@TroyQwertit is the same
Thanks for your sharing.
Thanks for watching !
Amazing..
I,M from Egypt
Amazing I am from Earth
I'm waiting from Brazil!!
Obrigado !
Condivido l'uso del perossido di idrogeno liquido per il retrobright,quello a crema tende a rovinare le superfici.ottimo lavoro!
Grazzie !
The best.....! Renzo da Firenze Italia
Grazie 👍
Thanks from Italy
Grazie !!
contrariamente a lo que se piensa el sol no es el causante del amarillo. Para probarlo, guarda el ordenador en una caja hermetica despues de limpiarlo y veras que en pocos meses estará otra vez amarillo. Otro producto que funciona igualmente es el Vanish en espuma.
Desde Mar del Plata, Argentina, país de corruptos. Excelente tú pagina. Recién te descubro. Felicitaciones!!!!!!
Thanks for sharing
Thx for watching !
Hola. genial solución! Los plásticos deben estar totalmente sumergidos en el agua oxigenada o no hace falta? Gracias!!
si deberian estar, podria funcionar solo con el vapor pero demoraria mucho ! Saludos !
Esto es mejor hacerlo en verano que el sol esté muy fuerte.
Nice video. I shall try it. Writing you from Mauritius.
Thanks for coment !
Buen video, el agua oxigenada que usas es de 100 volumenes?? Yo probe con una de 40 volumenes que es como crema, lo puse al sol 3h y blanqueo muy poco, repetí la operacion y se pusieron mas amarillos, por que es eso? Puedo usar la de 100 volumenes
Droguería Paysandú. Saludos yorugua!
Un saludo!
teşekkürler
Selamlar !
Sensacional 👏👏👏 São Paulo, Brasil
Obrigado !
Un petit bonjour depuis la France !
Bon apetit
Amazing.
From Russia.
Thnaks !
Russia do not exist. Putler kaputt
Here from Canada ^^
thx for watching from Canada !
From Indonesia 👍
👍
incredible
Thanks for watching 👍
Hello. Greetings from Poland. Cool channel. Thanks for the interesting ideas! * Witaj. Pozdrowienia z Polski. Fajny kanał. Dzięki za ciekawe pomysły!
Thanks for watching from Poland !
You the best
thx for watching !
Cuanto tiempo de recomienda dejar ahi..?
Gracias, un pregunta el agua oxigenada hay que rebajarla con agua, o tiene que ser pura, y tambien veo que lo dejas al sol, durante cuento tiempo ?
Hola, lo dejas al menos un dia al sol, o mas si no logras el resultado esperado. Si es pura mejor. La proxima ves activa los subtitulos alli explico los detalles. Saludos !
Paysandu, solía pasar mínimo dos veces al año por esa ciudad viniendo desde Entre rios hacia las playas del este. nada que ver con el peróxido de hidrogeno pero bueh, hermosos recuerdos.
Me alego !! Saludos !
Love from Pakistan 🎉
thx for watching !
من سلطنة عمان
depois de clarear as peças brancas eu usaria verniz automotivo para conservar 🇧🇷
Sim otima idea ! Obrigado
Lo hice muchas veces y queda bien , eso si mucho sol y tiempo
Asi es Saludos !
good for you
im from IRAN
Thanks for watching from Iran 👍
Muy bueno
Desde Uruguay y veo que eres de Uruguay tambien (agua oxíg de Drogueria Paysandú)😊
Asi es compatriota ! Saludos y gracias por ver !
@@Repairman10169
Gracias por compartir
La Tribu Bartora es mi cuenta para la tv 😉
Hello Mr., I was wondering: Can I also use a lamp instead of leaving it in direct sunlight? My balkony only catches a little bit of actual sunlight and that only for a few hours.
Hello, yes but you must use UV lamp
Bro, Saludo. Cuánto tiempo dura en volverse amarillento de nuevo? Gracias 🤗🇻🇪
Hola, no estoy sewguro...supongo dependerá cuanta luz reciba...Saludos
About the keyboard: how did you clean the stuff around the keys? Cause usually that's shut tight around the electrical board...
The keys are to be wedged out with a screw driver or a blunt knife frim it's plunging switch lever.
does this works on plastic beads?
Sir please time help
Ise kitna time tak rakhna hai
Hello, I am from India.
Welcome!
我來自香港, I am from Hong Kong
Hi ! Thx for watching from Hong kong !
Güzel video eline aklına sağlık Türkiye
Creepy video, but it did clear the yellowness.
Hi there im living in uk where I can buy this stuff like that?
Merci de Liège BE❤
Merci !
Por casualidad, vives en Uruguay no? :D En tus videos he visto productos como el Agua Oxigenada de la droguería local, masa ROyal , etc. Saludos!!!
Asi es soy de Uruguay ! Saludos !
Hi! Thanks for the vid. I was wondering. You said to leave in direct sunlight for 6 hours. Do you rotate the containers or move the pieces around to get sun coverage on all sides?
Hi, yes better rotate and move the pieces. Thx for watching !
@@Repairman10169 Thank you :)
How many percent?
Can this work on yellowed pvc canvas used on louis vuitton handbags
You will bleach the canvas. This works on pvc PLASTICs. pvc canvas is cloth material COATED with plastic. For this o work, you have to submerge the whole surface in a liquid or gel, u cannot do this without wetting the fabric coated by the pvc.
Rio de janeiro , capital.
BRASIL
Obrigado !
How do you coat them with some clear coat so they remain white always.
the yellowing come from UV light (mainly from the sun) so unless the coating have UV shield I guess it will still yellowing over time
Guys any idea how long should i leave it..?
question! does this work on clear plastic aswell?
Sorry never tried.
Hey! If I wanted to do this with a plastic sink but am unable to move it into the sun, would it still work slightly just soaking it still?
No, it needs uv rays, either sun or an UV lamp. thx for watching !
Y para piezas que no puedo sumergir o poner al sol (el frente de un aire acondicionado) , como hago?
Hay peroxido en gel lo usan en peluquerias, lo aplicas con pincel, no es tan concentrado por lo que demorara mas en blanquear. Saludos !
Agua acinada and hydro peroxide are the same?
Si
heyyy...how does one get those super-fine old Microsoft keyboards to work on Windows 10? I've tried, and NO_WAY!!! I loved those boards, and great to type on, right? Help! Thanks!
Try with quality adapter from PS (ps/2) to usb !
Can you use high powered lights, to do the same
They must emit UV light, maybe the sun, UV leds, etc
I had a computer that was turning yellow/brown from cigarette smoke. Wiped it right off with isopropyl alcohol.
I had the same problem, but from peeing on my computer, wiping with isopropyl alcohol did work too!
Does the hydrogen peroxide have no affect on colored surfaces? Does it only bleach the whites?
No
So how long do u let it sit in the hydrogen peroxide?
what % H2O2 did you use, and how long did it soak ?
Think it said 100 volumes (idk if that helps)
@@fernandapinzon4745 there are 3%, 6% or stongest is 9%. Which one
@@fernandapinzon4745 100 VOLUMES is different mark, it is equal to 30% - standard marking
@arksin11 30% (food grade) - hard to find and gloves are mandatory
How do you clean parts that are too big or complicated to disassemble, so there are no way to put them in a jar?
Spray bottle 🤷🏼♀️🤷🏼♀️🤷🏼♀️
Try to find a gel (it's used for bleaching hair so it's easy to find) apply it with a brush and wrap the whole thing with thin clear foil. But be aware that electronics maybe damaged!
Could the peroxide be reused for the same process once again?
I would say no, H202 exposed to Light it degrades into H20
Reusability varies depending on the used volume, the concentration and the degree of yellowing.
エアコンが黄色いんですよね……取り外せない
Good. For how long?
Clear coat forever
Island of Mauritius ;)
Thx for watching !
Ahora buscar un tacho gigante para meter el aire acondicionado
Jaja.. si va a estar complicado..
おぉ！101英語キーのナチュラルキーボード！！
うちにも未だ４枚ほどありますわwww
It should be noted that the Hydrogen Peroxide used in this video is not that which is available for wound cleansing. That which was used here is 100%.
it's just 30%
100% Wasserstoffperoxid gibt es nicht,da es zu instabil ist !!
30% ist auch schon sehr heftig und ziemlich gefährlich!
Thank you , that’s the info I was seeking in the comments
NO !!! 100 VOL = 30% If You use 100% say bye-bye to plastic :)
what about for stuff that can’t be soaked
I have some action figures that has turned yellow even though they were in storage instead of being in the sun. If I were to do this treatment, even though it would whitening them, would it also enforce the plastic so it won't be brittle?
no.. old plastics and rubber will get brittle or degrade
you can enforce them with transparent resin.. but not guaranteed will work or making it looks like glossy
@@judasthepious1499 I figured as much. Whitening a yellowed plastic is one thing, restoring its actual structural integrity is something else. Seems like there's no way to restore the brittleness of a yellowed action figure aside from replacing the actual yellowed piece.
Goood
👍
Sweden
❤❤
❤
I have a big portable AC that became yellow. It's too big to drown it in liquid. Is there a way to apply a product on it instead?
Hi, there is peroxide in form of gel, may work. thx for watching !
@@Repairman10169 Thank you I will search for it any try it out!
I've done this with bleach in the summer in the sun just whipping the surface over with bleach and leaving for about ten mins no longer as can eat away at plastic
👍
Io di solito gli faccio prendere uno spavento colossale e riesco a sbiancare di tutto, anche le persone.
😂😂😂
Works in a grey plastic?
What if it’s something you cannot submerge?
They sell peroxide in cream form, apply with a brush.
Türkiye❤
I've done this in the past. I have plastic parts that are 20 years old that are still bright white. The yellowing doesn't return. Also it doesn't make the plastic brittle either. Both are myths.
Great ! thx for sharing your experience !
The volume indicates the concentration of peroxide in the solution.
3% = 10 volume
6% = 20 volume
12% = 40 volume
30% = 100 volume
35% = 130 volume
So this is 30%, because VOLUME is rear used, more used is %
Thanks for the info 👌
Does this method work on plastic toys?
Yes should work.
Yes, many vintage toy restorers use this method. Check out "toy polloi" channel on UA-cam.
@@Repairman10169 thank you
south korea
Уточните скольки процентную перекись водорода вы использовали. Спасибо. Привет из Украины！
Концентрація 100 об
Вітаю!
@@Repairman10169 К сожалению жителю Украины это ничего не говорит.У нас концентрация указывается в процентах. Но за ответ спасибо.
@@user-lj2hs1ms1j 100 VOL = 30% - USE GLOVES !!!
Welche Konzentrierung des Wasserstoff Peroxyd?
Ich habe 100 Vol. verwendet, Sie können weniger konzentriert verwenden, aber das dauert länger. Grüße
Du bekommst in Deutschland sowieso nur noch Lösungen mit maximal 12%.
100 VOL = 30% H2O2
Poland
オキシフルの濃度は？
100 VOLUME = 30%