Data Flow Programming Basics

Поділитися
Вставка
  • Опубліковано 28 сер 2024

КОМЕНТАРІ • 78

  • @2454014
    @2454014 7 років тому +10

    These are solid tutorials so far.

  • @maro8D
    @maro8D 7 років тому +39

    0:04 Ahh that smile!

  • @Sscorp72
    @Sscorp72 9 років тому +9

    Right-click on your slider then select Visible Items\Digital Display. Doesn't need any code.

  • @stylesjustin9192
    @stylesjustin9192 5 років тому +8

    Great totorials and smiles.

  • @lubime10
    @lubime10 10 років тому +13

    Excellent !
    Very clear , very simple explanation !!
    Thanks!!!

  • @arismenachekanian1804
    @arismenachekanian1804 2 дні тому

    LabVIEW does not execute left to right or top to bottom. It executes based on the wiring data flow.

  • @koltonjones866
    @koltonjones866 11 років тому +14

    How are the numbers changing as you change the scalar of temperature?

  • @muhammadiqbal-tu2mt
    @muhammadiqbal-tu2mt 2 роки тому

    Good to be here! Thank you so much

  • @SixxLiner
    @SixxLiner 10 років тому +1

    ESTOY ENAMORADO DE LABVIEW.

  • @tommurphy2332
    @tommurphy2332 3 роки тому +1

    At this point, the conversion should be checked by putting in key values. Entering 32 degrees F should give 0 degrees C and entering 212 degrees F should give 100 degrees C. However, the temperature range slider for degrees F does not allow the value 212 degrees to be entered because it tops out at 200 degrees F. This is a functional validation step that's missing from this video.

  • @waleedelicious5043
    @waleedelicious5043 3 роки тому +2

    From where he get the temperature?

  • @ELECTROMAN_MX
    @ELECTROMAN_MX 5 років тому +1

    Hi i need to add a boolean switch to convert from farenheid to celcius and viceversa and how to implement in my program?

    • @NIApps
      @NIApps  5 років тому +1

      One way to do that would be to put the F calculations and the C calculations in separate cases on a case structure and have the input to the case structure be the Boolean control. When the control is one way, it can calculate F and when the control is the other way, you can calculate C.

    • @ELECTROMAN_MX
      @ELECTROMAN_MX 5 років тому

      @@NIApps Thank You for the suggestion

  • @jaredmaato9513
    @jaredmaato9513 3 роки тому +1

    I used Labview in my msc project

  • @nicolasb3362
    @nicolasb3362 4 роки тому

    How does the glider and the thermometer communicate with the control and the indicator boxes respectively. The interconnections are not explicit on the block diagram. I could wire the output of the calculus directly to the indicator and thermometer simultaneously, but couldn't do such with the control as it doesn't take an input. Labview 2019 here. Thanks in advance.

  • @banumathik.l375
    @banumathik.l375 3 місяці тому +1

    Sir, can we get tutorial for control systems,
    Thank you

    • @NIApps
      @NIApps  3 місяці тому

      To learn more about using control systems, you can visit our help site here: bit.ly/3ViIfif. Let us know if you have any more questions.

  • @bayanmoradi6347
    @bayanmoradi6347 5 місяців тому +1

    how to add that white triangle shaped slider?

    • @NIApps
      @NIApps  5 місяців тому

      Hi there, you have to right-click on the front panel to add items. Please let us know if we can assist you further.

  • @AvinashAvikam
    @AvinashAvikam 3 роки тому

    I'm unable to see Arduino option in my LabVIEW home window

  • @mahmudrajon9104
    @mahmudrajon9104 3 роки тому

    hi dear, need interface with selec power meter. I want to make data base by using LabView by RS485 communication. how I get this software. please help on us.

  • @mirsiadulmurshalin
    @mirsiadulmurshalin Рік тому

    I am using macOs m1 chip and i am not able to install Labview .

    • @NIApps
      @NIApps  Рік тому +1

      Hi Mirsiadul, we don't have LabVIEW support for Apple M1 devices, yet. You can find more details about this in our Test Workflow Roadmap, which includes LabVIEW, here: www.ni.com/content/dam/web/pdfs/test-workflow-roadmap.pdf Also, you can provide feedback in the linked survey in the document.

  • @thunderpie94
    @thunderpie94 2 роки тому

    I can't find where to get temperature from on the front panel...

    • @NIApps
      @NIApps  2 роки тому

      Hi Alicia! For technical support inquiries, we recommend visiting our support website: www.ni.com/en-us/support.html. From here, you can share your question with the community, or open a support ticket with our team. Let us know if you have any more questions!

  • @innovationsurvival
    @innovationsurvival 4 роки тому

    Excellent job. Just excellent.

  • @shamschowdhury3999
    @shamschowdhury3999 Місяць тому

    Nice tutorial

    • @NIApps
      @NIApps  Місяць тому

      Glad to hear you found it to be useful!

  • @hinarohi3226
    @hinarohi3226 4 роки тому

    can anyone help me out please, my lab view program is not showing my kiethly electrometer model 6517A, although i have installed the driver too.

    • @NIApps
      @NIApps  4 роки тому

      Try ni.com/support

  • @pankajsinghv
    @pankajsinghv 6 років тому

    Good to know how data flow programming works.

  • @deepseeker6245
    @deepseeker6245 4 роки тому

    thanks for the great videos!

  • @md.atiqurrahman5443
    @md.atiqurrahman5443 6 років тому

    Hello, i want to learn core 1 and core 2 from NI. however, i choose to take self-paced method. Do i need to buy any course kit also? i really don't understand the way of learning here.

    • @NIApps
      @NIApps  6 років тому

      To do the official Core 1 online training, you would need to sign up for it here: sine.ni.com/tacs/app/overview/p/ap/of/lang/en/pg/1/sn/n24:12725/id/1582/
      After signing up, you should receive all of the necessary material.
      You can also learn about the options for training here: www.ni.com/training/online/

  • @m.pradhan1882
    @m.pradhan1882 8 років тому +3

    Hi, could you please, help me with making a programme using labview for impact modal testing to simulate the results for input force applied and resultant acceleration recorded with accelerometer using a data acquisition card?

  • @marwanchairi1015
    @marwanchairi1015 3 роки тому

    hello can you visit tell us how you make it the numeric indicator

  • @monalisamallick9426
    @monalisamallick9426 4 роки тому

    how to add those strings which display exact number what we are changing

    • @Tresor123
      @Tresor123 4 роки тому +5

      Right click on the item -> Visible items -> Digital display

  • @w5056
    @w5056 6 років тому

    Thanks a lot. Could you help me please I spent 30 min to find how to get the blue wire but i did not find it.

    • @NIApps
      @NIApps  6 років тому

      The color of the wire is dependent on the data type that you are sending. Which data type are you trying to use?

  • @afrikanking4022
    @afrikanking4022 10 років тому +7

    Very professional

    • @xxxxxGhostBoyxxxxx
      @xxxxxGhostBoyxxxxx 9 років тому

      ***** are you American? because if you do, you need to realize your President is Black and theoretically, you are slave to your Black President haha. Geez. What's up with hatred?

    • @myowncomputerstuff
      @myowncomputerstuff 7 років тому +2

      ChariotMan7 I don't get it. All he said was that it was a very professional video. Why are you assuming he's some closet-racist.

  • @yashashreejadhav5984
    @yashashreejadhav5984 6 місяців тому

    Thank you for nice video...:)

  • @JOHNY20103
    @JOHNY20103 5 років тому

    can somebody help me in getting the calibration executive latest version?

  • @ChaoticSerenity
    @ChaoticSerenity 10 років тому

    Out of curiosity, could you somehow define the function where the 5/9 division was unnecessary? As in, could the operation be executed so that you just use the value of 1.8 as a constant?

    • @vapourmile
      @vapourmile 9 років тому +2

      +ChaoticSerenity
      I expect, since the result on the output pin of the division function must be 0.5 recurring, not 1.8, then he could use it straight.
      He makes the best decision though, because 5/9 produces a recurring decimal so, however many digits you provide, there's always a rounding error, actually storing the rational number has better numerical integrity than typing 0.555555555555555555555...

  • @HienTran-oe5lq
    @HienTran-oe5lq 7 років тому +1

    Hello. He asked me. Do you have a labview library link for the user? Let me go please thank you.

  • @alexyousefian4359
    @alexyousefian4359 3 роки тому

    nice example!

  • @deepeshev2686
    @deepeshev2686 5 років тому

    how can we interface labview with wireless device(bluetooth)

    • @NIApps
      @NIApps  5 років тому

      I suggest looking at the LabVIEW forums: forums.ni.com/t5/LabVIEW/bd-p/170

  • @user-dp1pr3hj7h
    @user-dp1pr3hj7h 4 роки тому

    Very GOOD!!!

  • @wenjiagu7018
    @wenjiagu7018 5 років тому +1

    you mean chemistry class or physics class?

  • @jugnu361
    @jugnu361 2 роки тому

    thanks

  • @laxus7764
    @laxus7764 5 років тому

    Your english is awesome

    • @ashwinmathur6285
      @ashwinmathur6285 4 роки тому

      He is American Indian and he is highly qualified guy. Apni tarah normal engineer nhi h yeh.

  • @haritacoke3735
    @haritacoke3735 6 років тому

    I cannot edit the number for Farehi temperature help pls

    • @NIApps
      @NIApps  6 років тому

      Do you want to edit the numbers on the thermometer indicator?

    • @haritacoke3735
      @haritacoke3735 6 років тому

      no i mean on the slider, it appears as 0,2,4,6.. and when i double click on it and edit it to 0, 50,100... as you it keeps going back to its initial values 0,2,4,6... I cannot get the slider with the number like you

    • @NIApps
      @NIApps  6 років тому

      Have you for sure made the slider a control and not an indicator? (Just to be clear, a control is an input and an indicator is an output). To know, you can right click on the slider to see what it is.

    • @haritacoke3735
      @haritacoke3735 6 років тому

      yes thx i can adjust it now

    • @akshayalade8409
      @akshayalade8409 8 місяців тому

      @@NIAppshow should we make the slider a control

  • @Engaliyaseenalrubayee
    @Engaliyaseenalrubayee 6 років тому

    Thanks

  • @starkex7230
    @starkex7230 3 роки тому

    Aren't my ears stuck or something? I hear an Indian guy, who can perfectly speaks English! Great tutorial videos, by the way :) Keep it up.

  • @samalibya2032
    @samalibya2032 7 років тому

    great!!

  • @nagarjunatelagam5068
    @nagarjunatelagam5068 7 років тому

    any idea about simulating JK flipflop,

  • @muraliytm3316
    @muraliytm3316 2 місяці тому

    looking like Cillian Murphy

  • @santhoshkarna364
    @santhoshkarna364 6 років тому

    Good

  • @user-vq6jr5nj9e
    @user-vq6jr5nj9e 8 років тому +1

    不错

  • @prathibhavlogs4418
    @prathibhavlogs4418 3 роки тому

    i am very dissapointed by this video.

  • @nagarjunatelagam5068
    @nagarjunatelagam5068 7 років тому

    any idea about simulating JK flipflop,