CCNA 2 SRWE Final PT Skills Assessment Exam (PTSA) For any assistance WhatsApp: +254791812690 Visit our Website to contact us: otombenard.com or gurutech-solutionske.otombenard.com Follow us on Facebook: facebook.com/GtechSolutionsKenya Support me on PayPal: benardotom26@gmail.com 7. Bank System Network Part 3: ua-cam.com/video/NLMqmaBvD8Q/v-deo.html 6. Bank System Network Part 2: ua-cam.com/video/rtWYsyT7_1c/v-deo.html 5. Bank System Network Part 1: ua-cam.com/video/T8F5F9Jt8Yk/v-deo.html 4. Campus Network: ua-cam.com/video/qIbhkmTB8Q8/v-deo.html 3. Hotel System Network: ua-cam.com/video/RwFJTJTe-OM/v-deo.html 2. SOHO Network: ua-cam.com/video/F_dSpaTMyuA/v-deo.html 1. Simple Networking Project: ua-cam.com/video/T8F5F9Jt8Yk/v-deo.html ua-cam.com/video/F_dSpaTMyuA/v-deo.html Join this channel to get access to perks: ua-cam.com/channels/xJkPCIi5Tras0_Y8e54ZKA.htmljoin
You don't need a cross-over cable. It's assumed the switches have auto-mdix enabled. I actually got the config wrong because I used the cross-over cable and not the straight-through cable
good day to the content creator, a huge thank you for creating this video as it helps me, i got a 72.9 percentage score even though i couldnt connect the dhcp eventually
How could the Lo0 be represented in packet tracer. In my SRWE skills assessment (which I already passed recently, thanks to you) the router has a loopback Lo0 representation. Yet I wonder how it was done to represent the Lo0 loopback in the activity. In my intent to reproduce the skills assessment, I can setup all the equipment (2 PC´s, 2 switches, and router) along with their connections. Yet to show the router with the symbology representing the Lo0, I cannot figure what to use. For in the original activity it has ---|Lo0 drawn to represent the loopback.
@@gurutechnetworks thanks for this, I got low marks for ccna1 PTSA because i could not figure out how to undo for this so had to improvise during configurations, now i am doing PTSA for ccna2 and will definitely score everything
you forgot to specify the (ip ssh version 2) command and when you give the ipv6 add manually to pc should take them by the *nic* specified on the table + the link local addres should be put on the default gateway on ipv6
I greatly appreciate your knowledge and efforts in making this video... but I hugely disappointed with the way of your speaking... sorry to say this but why can't you talk loudly, properly and actively... it looks like you are sleeping and mumbling within yourself which we can't even understand a bit... these content videos are very limited in youtube.. so when you are making videos please take utmost care regarding your voice and the way of explanation.. take it as a positive feedback👍
Dont do that you came here looking for the easy way out and he did most of the work on the video so do yourself a favor and do some homework dont be lazy and you’re literally watch the answer for exam so shame on you
CCNA 2 SRWE Final PT Skills Assessment Exam (PTSA)
For any assistance WhatsApp: +254791812690
Visit our Website to contact us: otombenard.com or gurutech-solutionske.otombenard.com
Follow us on Facebook: facebook.com/GtechSolutionsKenya
Support me on PayPal: benardotom26@gmail.com
7. Bank System Network Part 3: ua-cam.com/video/NLMqmaBvD8Q/v-deo.html
6. Bank System Network Part 2: ua-cam.com/video/rtWYsyT7_1c/v-deo.html
5. Bank System Network Part 1: ua-cam.com/video/T8F5F9Jt8Yk/v-deo.html
4. Campus Network: ua-cam.com/video/qIbhkmTB8Q8/v-deo.html
3. Hotel System Network: ua-cam.com/video/RwFJTJTe-OM/v-deo.html
2. SOHO Network: ua-cam.com/video/F_dSpaTMyuA/v-deo.html
1. Simple Networking Project: ua-cam.com/video/T8F5F9Jt8Yk/v-deo.html
ua-cam.com/video/F_dSpaTMyuA/v-deo.html
Join this channel to get access to perks:
ua-cam.com/channels/xJkPCIi5Tras0_Y8e54ZKA.htmljoin
You don't need a cross-over cable. It's assumed the switches have auto-mdix enabled. I actually got the config wrong because I used the cross-over cable and not the straight-through cable
That was not indicated on my instructions
Yet you know for training purposes and without mentioning auto-mdx we should use crossover cable btw like devices.
good day to the content creator, a huge thank you for creating this video as it helps me, i got a 72.9 percentage score even though i couldnt connect the dhcp eventually
I'm glad you learned something
You got a problem with the DHCPv4 and didn't show how to fix it, could you please explain??
I think it worked finally, check 1:17:07
How could the Lo0 be represented in packet tracer. In my SRWE skills assessment (which I already passed recently, thanks to you) the router has a loopback Lo0 representation. Yet I wonder how it was done to represent the Lo0 loopback in the activity. In my intent to reproduce the skills assessment, I can setup all the equipment (2 PC´s, 2 switches, and router) along with their connections. Yet to show the router with the symbology representing the Lo0, I cannot figure what to use. For in the original activity it has ---|Lo0 drawn to represent the loopback.
Great bro
Can we complete all the configuration for S1 first and then move to S2, or is it necessary to alternate between S1 and S2?
It's necessary to go according to the instructions given
how do you make dhcp a success in the last part of video?
Configuration following the guidelines
Dude, you need to optimize or update this video, I followed all of your steps and got 61%
Still, thank you
Glad bro, cheers 🥂
Glad bro, cheers 🥂
How did you calculate the adresses you have to exclude?
It's explained in the task
Quick question.. if I made a mistake with cable placement, how do I undo it because there's no option for deleting the cable?
Please help
Unplug it and plug in the right device/port,
Check inpect rear option on the devices and you'll see how to Unplug
@@gurutechnetworks thanks for this, I got low marks for ccna1 PTSA because i could not figure out how to undo for this so had to improvise during configurations, now i am doing PTSA for ccna2 and will definitely score everything
@@conradmbugua9098
can you unplug in the exam? i maange to unplug in a normal test thanks to you@@gurutechnetworks
Why put at 90% on the thumbnail but get a 80%
Check again
you forgot to specify the (ip ssh version 2) command and when you give the ipv6 add manually to pc should take them by the *nic* specified on the table + the link local addres should be put on the default gateway on ipv6
Thanks for correction
the questions of the final test how much are 60 or 55 per cisco?
I do not understand your comment
Is this video still applicable for this year's PTSA?
Yes
u skip the last part right :(, its failed before but then u skip where ur dhcp success, near 1:17:05
Sure, I didn't notice that. I hope dhcp worker
God bless you brother!
Blessed to you too
why you have on thumbnail 90%, when its 80%. 🧐
check it clearly
it should say at the beginning that it is to obtain a maximum of 80 points.
Hahaha, how can you say your marks before doing examination?
Why I just got 57 points, huhu, I follow every your step, not a single difference. Anyway thanks for your work.
Seems you missed some critical parts
Well, unluckly i got 43%. It's a bummer 😥
Sorry, but you didn't do more research
Thank you! ❤
Cheers 🥂
where can I download this
Visit cisco netacad site
I greatly appreciate your knowledge and efforts in making this video... but I hugely disappointed with the way of your speaking... sorry to say this but why can't you talk loudly, properly and actively... it looks like you are sleeping and mumbling within yourself which we can't even understand a bit... these content videos are very limited in youtube.. so when you are making videos please take utmost care regarding your voice and the way of explanation.. take it as a positive feedback👍
Noted with thanks, although if you increase the volume you'll grasp whatever I was saying clearly.
@@gurutechnetworks Yeah a little bit.. but please try to improve it for upcoming videos👍
@@gurutechnetworks I had no problems hearing you correctly
Use headphones maybe
I needed a 100 not no 80
Great, work-around
DHCP still failed
Check if you missed something
I only got 53% but still thank you!
Cheers 🥂
my score is only 51%
Sorry, did you follow the video keenly?
You cut the video to a screen showing a successful DHCP message yet didn't bother to explain how you did it. Shame on you.
same applies to you
Dont do that you came here looking for the easy way out and he did most of the work on the video so do yourself a favor and do some homework dont be lazy and you’re literally watch the answer for exam so shame on you