How to Install Dometic Micro Heki Rooflight Fiat Ducato Camper/Citroen Relay/Peugeot Boxer/ Skylight
Вставка
- Опубліковано 11 гру 2024
- In this video I install a Dometic Mirco Heki Rooflight (skylight). This is pretty similar to the Dometic Heki Mini that I previously installed. The micro measures 280x280mm as opposed to the mini which measures 400x400mm.
The dometic Heki Mini Skylight (Rooflight) is great for installing inside bathroom compartments and offer ventilation as well as additional natural light.
I used mastic sealant tape and then Sikaflex 522 to seal the rooflight to the roof.
This is video is a full how to guide for installation.
Don't forget to subscribe so that you don't missed out on future videos in this Fiat Ducato Camper Conversion Series (same van as Peugeot Boxer, Citroen Relay and Ram Promaster).
I bought my roof light from Jacksons leisure. You have to buy the installation kit, (trim ring extension piece, brackets & screws separately) as it depends on the thickness of your roof.
The rooflight I installed was without forced ventilation (with forced ventilation is for caravans).
Thanks for watching.
![Dometic Micro Heki Dachfenster im Wohnwagen / Wohnmobil einbauen [Endlich raus mit der Dachluke]](http://i.ytimg.com/vi/volgPcm9boE/mqdefault.jpg)
Just what I needed, about to order a micro Heki for my Relay and wondered about the fixing kit so the info of 43mm really helped. Should be enough over the bed. Thanks
Thanks for this video. It shows a lot of the details I didn't fully grasp. It was nice to see how the extension frame fits in as I didn't really understand how it interfaced with the ceiling.
I'm about to fit one of these to my new shape Crafter. The roof has ridge lines as well, so like your idea of the tape buildup.
In a somewhat unrelated comment, I like how you have ply-stripped the roof beams. I'm pinching this idea too!
It will be interesting to see what you do with the roof if you plan to do a video since it looks like it will be different to the ply and batten sections ripped out from the previous thin profile version and you already have a thicker floor.
Hey, came across your video as I am currently looking at purchasing the micro heki. Just wondered if you've had any leaking issues since installing? I saw another video about cleaning the plastic frame (don't think it was the heki) with dishwashing liquid and maybe even sanding it to create a better grip for the sealant, as they originally didn't and had some leaks. Thanks
@jamesdeUK no issues with leaks. However when doing any bonding I would recommend that both surfaces are clean. Sanding not required in this instance but clean the roof with soapy water, dry it, then clean with a solvent e.g. isopropyl alcohol and you should be sweet.
@@sampayne6318 Many thanks :)
Hi,
I'm currently installing a Medi Heki 700x500 in my Ford Transit Connect LWB, but I'm facing an issue with the roof profile, which bends in an arch of about 25 mm. This curvature makes it challenging to secure the Medi Heki frame tightly to the roof. I'm looking for any experiences, thoughts, or suggestions for inspiration. Right now, I'm experimenting with wooden frames for the interior that match the roof's profile, but I'm still struggling with the outer fitting of the Medi Heki frame, which leaves a gap due to the roof's bending.
All the best;
Cheers!
Hey there! I have a very annoying problem: I bought the Micro Heki and before installing it, I already mounted the inner frame with fly net (because I couldn't wait to see how it looks), which was really stupid because now I can't get it off. Is there a way to take it back out?
HI Sam, thx for the video. How are you after that year with the ductape adaption of the roof? Would you stil reccomend this? and why do you write that forced ventilation is just for caravans? were thinking to get one with forced ventialation for our ducato since we bring a lot of humidity inside due to sports and wet dog....
Hi. Forced ventilation is not recommended for van conversions as the ventilation holes can whistle as you drive along (not a issue for a caravan as you're not in it when it's moving). Hope this helps. Cheers
@@sampayne6318 thanks for the reply! will do my installation of a micro and mini heki next week. found it really helpful how you adapted the roof with the butil sealing tape. Would you do anything different now after your year of testing?
Nice work on this one. Quick one as we’re about to fit one of our own and could t work it out. What’s the purpose of the wooden frame here as you’re not screwing down through the roof into it to pull it tight?
The wooden frame effectively acts as a spacer to stop you squishing your roof (insulation) when you screw the exterior part of the roof light to the interior frame. It also gives your roof a bit more rigidity around the hole that you've cut. Cheers!
@@sampayne6318 amazing cheers
I just don't understand why everyone uses timber to frame it. I got a different brand and theres no mention of making a frame in the instructions. I'm just afraid to cut my hole out and not know the depth of timber frame to make😂
Every model is made for a certain roof thickness. E.g. 23-60mm. So you need to make a frame to create that thickness, the rooflight sandwiches the wood together. At least that's how I understand it😅
@@hannevb5983 Ye I've mine done now a while. Took a bit of thinking lol.. in basically needs to match up with your own ceiling what ever depth that may be
I'd rather use Sikaflex 710
Where do you get it…