Can I use this to change the setting to automatically connect to last Bluetooth device when I start the car? My car used to do this automatically but recently stopped and I’d have to manually select it every time now.
When I go to the "Input signal senting" options and switch everything to NTSC, then I go back to "Front Monitor" and select NV and the camera works. When I go to END to save the settings, it reverts back to the original PAL. Is the last camera not working? I installed the camera, the supermarket supports PAL/NTSC type.
You seem like the guy I need lol, I have a w212 that I just change the battery on, everything is working fine except the radio no longer switches on by default, I have to push the on button every time I get in the car, would you know what setting I need to change to default it back to on as default, thank you for your time.
Try manually switching it off, before you turn the car off. Lock the car, then re-open it, start the car and the radio. then after 10 secs or so, switch off the car with the radio still on, it should remember this setting.
You had the exact same problem I had... No AUX in my car so that parameter was disabled. Thank you so much ! Any chance we can get the car's original GPS antenna to work with the head unit ? I tried connecting the GPS antenna that came with it but I'm getting no signal...
@@joeking3154 Nope, it's not. AUX, when you have the option, is in the compartment under the central armrest, right next to the USB port. I do have the USB port, I do not have the AUX port because that option had not been selected by the original buyer. However, as mentioned in my original comment, the problem was solved by following this video. Oh, and it's a glove box. Cloves are supposed to be in your spice cabinet or rack, in your kitchen (^^,)
Hi - I cannot access the Engineering menu in My 2009 W212 E350 petrol even after pressing the Hang up button, Number 1 & the # button. Also my Navi screen completely disappeared. And even Audio cannot be accessed. The screen actually hangs when I select Audio. This is a Japanese Spec Car. Initially the Radio frequencies could be seen and I could hear well but after a casual check up with a mechanic he connected the OBD to clear all faults and then this issue has started. Any suggestions & help is much appreciated. The car is in UAE ( Dubai ) - so need to work to get the radio frequency matched to GCC standard Thanks in Advance.
I got 2015 CLS 63 s dose anyone know how to enter engineering mode? I’ve tried everything I’m only getting dealer menu and not much you can do in that menu.
I have same unit but dont have audio, tel, and system option. Is that conected with navigation so without navigation i cant get those two. To use aux i must go to open cd and then chose aux.
Question for u. My wife has a 2009 E250 cdi NTG4 MB connector in center console audio 20. I have a 2011 ntg4 audio 20 with AUX PORT IN GLOVE BOX E250 coupe. No Bluetooth audio option in either of them in menu. iPhone connect for calls works just not music. Engineering mode looks completely different to yours any ideas.
@@killerhertzmercedes nothing. Strange that my radio software is the same as hers and mines 2 year later. Is audio 20 and command just software or are they different hardware radios. Can I just get a software update?
No matter what I do, I cannot get into the reset menu. At one click I receive a “Take Your Key from Ignition” prompt. Two clicks, and I can see the trip/odometer screen, but nothing happens when I push the call and ok buttons after holding them for approx. 5 secs. There are no other known issues with key. Any help would be greatly appreciated. Thanks…
Wish I could use this to figure of I have blind spot assist and parking assist. Seems like those features are hidden or didn't come with my 2010 4matic
I have to manually input my car settings because I purchased a new command unit. Once I turn certain features on, what do I do next so that car can reload with the new features? Do I just press end and exit or do I do a system reset? Thank you
Hi, I have W212 2015 E220cdi with NTG5/5.5 Comand Aps. I couldn't access to engineering menu. Neither EndCall+1+# nor EndCall+3+* worked for me. Is there anyone who can suggest any other key combinations for my car? Thanks in advance,
hey there i got 2015 cls 63 s amg, do you know to enter engineering menu? i try hangup+#+1 didn't work for me, can you have a video of that model plz and thank you
On my w204 I cannot get to EVM mode. If I press the the keys it goes into the comtel. I think I by mistake have reset the system and this has happen. The Navi option is also gone.
@@killerhertzmercedes thanks for the quick reply. I did reset the system in the ECM mode but through the option that is available under main screen System. It said data will be erase but did not think hat the NAVI option will also disappear and I will not be able to get into the ECM mode.
Does this also means that I have to go to the dealer to get my options back? Or anyone having the Star diagnostics Module can also reinstate the system back to its original state?
Hi , anyone knows to change regions on my navigation, car bought in the USA and now located in Europe , would like to update the maps do I need to change regions ?
The author is asking for your help, in the engineering menu I pressed the button # 8 to update, after which I lost the sound, what should I do to get everything back?
Mine doesn't show that shows different only one page and says system, tel, radio, swdl, sound, emc measure, ext player. 2012 c300 4matic i wanna access camera menu
@@nicknick6960 This video is for the COMAND NTG 4.0 system? not sure why you have replied to this video when you have a totally different system? Check the manual for your device. Regards
I have 2011 w218 cls and i didn't understand what did you say about the software updating is it good or not? And if i updated the software can i get back the old software?(the factory software)?
@@killerhertzmercedes sorry im talking about i installed the center console controller knob that spin to scroll and control the functions on the screen, also press down for enter or select.... and i got the NTG4 navigation update DVD .. that the firmware disc ? ...... do i still need to do the same procedures you mention?
hi thank u for ur amazing video?when I drive my car Mercedes w212 e350 2010 at first start distronic plus inoperative when I stop start it again it work sorry to hold brakes doesn't work to at the same time plz advise
@@killerhertzmercedes no, it looks just like the normal system with a few more options but nothing like yours…i mean i have much less options to choose feom
hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode
Joel anderson I think i got lucky. I kept hitting the comand knob and pressing the cd eject button. It would reset and after 30 seconds or so my cd (just a music disc) came out, and the system went back to normal. Im sure it worked only cause I had a cd in the player
Joel anderson The cd was already in when I started. Once it went to the reset screen after pressing the comand knob, I hit the eject button. Took a few tries.
I have also NTG 4.0 in my W212 12/2009, with navigation and I can also enter the hidden menu, but the engineering mode looks different, i can find also the Bluetooth audio but it's not checked and it's greyed out so i cannot change it, someone any ideas?
Good day how do you save settings in emc measure mode I go to the fan settings for eg and its set to 60% and I change to 100% but as soon as I go out and come back its back to 60%
HU Settings - HU Parameter (the following are the settings I put them in) (1) BT contact plate: Not Installed (2) LCT: Installed (3) BT audio: On (4) Audio Aux: Off (greyed out: not an option) (5) Video Aux: Off (6) Navi: installed (7) BT: on -back buttonx2 -pull command wheel down - system reset - reset - yes - go to audio, then go to the audio tab again to bring up the drop down menu of audio options, select BT audio and activating audio device comes up, then the audio streaming screen
@@Rima-hh8db hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode
But it seems useless what can you do in engineering Mode nothing really I want to change the colors of my screen or have a different Logo Pop is that possible like those two things?
I don't know why.. when i did it same way, the engineering menu is different with this video. In my car, when i push call up + # + 1 button together, the screen is like this linked video below. ua-cam.com/video/KzWqBeg3FRc/v-deo.html Does anyone know how can i access the engineering menu like THIS video?
@@brucemacdougall The video is titled "How to access engineering mode". Clearly you have difficulty reading and understanding titles. You don't know what you're doing 🤣
Can I use this to change the setting to automatically connect to last Bluetooth device when I start the car?
My car used to do this automatically but recently stopped and I’d have to manually select it every time now.
Hi i had a similar problem delete the phone history of connected devices and the cars history of paired devices and try again this worked for me.
What about the sound equaliser setting
Hi
Do u know how I can get into w221 / 2012 merc engineering menu?? Or have u done a video for this ?
anyone?
Following
The 2012 model is such a pain
When I go to the "Input signal senting" options and switch everything to NTSC, then I go back to "Front Monitor" and select NV and the camera works.
When I go to END to save the settings, it reverts back to the original PAL.
Is the last camera not working? I installed the camera, the supermarket supports PAL/NTSC type.
Great video … I have the ‘09 w211. Do you know how to get in to engineer mode there ?
Check my other video: ua-cam.com/video/BSoDrt2wIj4/v-deo.html&ab_channel=KillerHERTZMercedes
I have a A200 2015, can I activate the door open alert in screen with this menu? And the sound volume bar?
You will need to get it on STAR diagnostic for that.
You seem like the guy I need lol, I have a w212 that I just change the battery on, everything is working fine except the radio no longer switches on by default, I have to push the on button every time I get in the car, would you know what setting I need to change to default it back to on as default, thank you for your time.
Try manually switching it off, before you turn the car off.
Lock the car, then re-open it, start the car and the radio. then after 10 secs or so, switch off the car with the radio still on, it should remember this setting.
You had the exact same problem I had... No AUX in my car so that parameter was disabled. Thank you so much !
Any chance we can get the car's original GPS antenna to work with the head unit ? I tried connecting the GPS antenna that came with it but I'm getting no signal...
Aux is in the clove box.
@@joeking3154 Nope, it's not. AUX, when you have the option, is in the compartment under the central armrest, right next to the USB port. I do have the USB port, I do not have the AUX port because that option had not been selected by the original buyer. However, as mentioned in my original comment, the problem was solved by following this video.
Oh, and it's a glove box. Cloves are supposed to be in your spice cabinet or rack, in your kitchen (^^,)
Amg logo for 2014 cla 45? Seems like similar format
Hi - I cannot access the Engineering menu in My 2009 W212 E350 petrol even after pressing the Hang up button, Number 1 & the # button. Also my Navi screen completely disappeared. And even Audio cannot be accessed. The screen actually hangs when I select Audio. This is a Japanese Spec Car. Initially the Radio frequencies could be seen and I could hear well but after a casual check up with a mechanic he connected the OBD to clear all faults and then this issue has started. Any suggestions & help is much appreciated. The car is in UAE ( Dubai ) - so need to work to get the radio frequency matched to GCC standard Thanks in Advance.
Youll need to get it on Mercedes Xentry diagnostic system and get the country code of the vehicle changed.
Anyone know how to access engineering mode in an 2011 slk 350
I'd like to know too
How can I find out which EU Comand is required for a Japanese S 350 W221? Thanks.
I have a GLA 45 AMG 2015 … how do I check my speakers?
Nice video. Any idea how to do it on the w221 2010 s class ?
Should be the same if its NTG 4
Does this have the hidden AMG logo for start up??? Thanks
afraid not. it was only for the early NTG1 cars
I got 2015 CLS 63 s dose anyone know how to enter engineering mode? I’ve tried everything I’m only getting dealer menu and not much you can do in that menu.
I have same unit but dont have audio, tel, and system option. Is that conected with navigation so without navigation i cant get those two. To use aux i must go to open cd and then chose aux.
Does the Glk 2010 work?thanks
Question for u. My wife has a 2009 E250 cdi NTG4 MB connector in center console audio 20. I have a 2011 ntg4 audio 20 with AUX PORT IN GLOVE BOX E250 coupe. No Bluetooth audio option in either of them in menu. iPhone connect for calls works just not music. Engineering mode looks completely different to yours any ideas.
Hi,
Audio 20 is different that COMAND which is why yours is looking different. I am not familiar with Audio20. anything mentioned in handbook?
@@killerhertzmercedes nothing. Strange that my radio software is the same as hers and mines 2 year later. Is audio 20 and command just software or are they different hardware radios. Can I just get a software update?
How do I fix the bonnet sensor alarm?
Did you fixed that
Yes
@@arjxsid bro can you help me as well. It's annoying everytime I start the car
Those km on odometer is the real km of car? Please tell me
No matter what I do, I cannot get into the reset menu. At one click I receive a “Take Your Key from Ignition” prompt. Two clicks, and I can see the trip/odometer screen, but nothing happens when I push the call and ok buttons after holding them for approx. 5 secs. There are no other known issues with key. Any help would be greatly appreciated. Thanks…
Are you watching the correct video/correct NTG version?
But hot to select a color in the color bar section
Wie kann ich schauen welches update jahr ichhabe? Grüße
Hi how can I change my colour scheme from the one on this video to the black and red . Any suggestions or fixes would be appreciated 🙂
You cannot manually, different software versions had different colours...
i have E 350 2009 do can get Engineering menu ?
Anyone know how to use this to make the video play while driving or adjust the peddle response on my w212 coupe
Video whilst driving is highly dangerous @ illegal.
Hello how do I get the AMG logo instead of the Mercedes Benz Logo I was able to do it on my W211 but this X166 is a different ballgame
You can only do this on the NTG 1 version.
Wish I could use this to figure of I have blind spot assist and parking assist. Seems like those features are hidden or didn't come with my 2010 4matic
If they are not already visible, then it would appear that you car wasnt spec'd with these options from new and would need retro-fitting.
How change logo to amg w212
Doesn’t look like it’s possible (unlike on W211)
I have to manually input my car settings because I purchased a new command unit. Once I turn certain features on, what do I do next so that car can reload with the new features? Do I just press end and exit or do I do a system reset? Thank you
By entering the display setting can you change the background colour? Thanks
On the radio head unit, sorry didn’t make it clear
I'm afraid you can't change it from yellow.
Hi,
I have W212 2015 E220cdi with NTG5/5.5 Comand Aps.
I couldn't access to engineering menu. Neither EndCall+1+# nor EndCall+3+* worked for me.
Is there anyone who can suggest any other key combinations for my car?
Thanks in advance,
could you please make a video for ntg5? I looked everywhere and couldn't find how to activate it..
Im afraid you need STAR diagnostic machine to activate it :(
@@killerhertzmercedes Thank you!! its a GLC2018 model..
no wonder I cudnt find any videos..
hey there i got 2015 cls 63 s amg, do you know to enter engineering menu? i try hangup+#+1 didn't work for me, can you have a video of that model plz and thank you
did u figured it out bro? I am having the same issue
Kay Zhao no
Can someone tell me what is odometer km on secret menu please?
Would it work on 2009 Mercedes-Benz ML320?
As long as it has NTG4
What do you introduce the moving video to show us
Its illegal and extremely dangerous.
Hey I have a w212 2010 any idea how to check the map version on it
I pressed the update and I think that after that, when opening the doors, the radio restarts! I don't know how to solve it! 😢
Try to put off the items on MOST menu
in what menu we can see the real kilometers? how we can see it? thanks
I tried this method in my 2015 e350 Usa would Not Work. Why ?
HELP. My unit is now in a boot loop. How do a restore it.
On my w204 I cannot get to EVM mode. If I press the the keys it goes into the comtel.
I think I by mistake have reset the system and this has happen. The Navi option is also gone.
Need urgent help please
If you have fully reset it, im afraid you are going to need to get it diagnosed by a Mercedes STAR system.
@@killerhertzmercedes thanks for the quick reply.
I did reset the system in the ECM mode but through the option that is available under main screen System. It said data will be erase but did not think hat the NAVI option will also disappear and I will not be able to get into the ECM mode.
Does this also means that I have to go to the dealer to get my options back? Or anyone having the Star diagnostics Module can also reinstate the system back to its original state?
Hi , anyone knows to change regions on my navigation, car bought in the USA and now located in Europe , would like to update the maps do I need to change regions ?
You would be better off sourching a replacement COMAND unit from a UK car and swapping it over.
Hey how do I do this on my 2017 cls63 w218
What about the w221?
Hello, you know how to change the logo for the Amg, mine already brings the gray letters, greetings
You can only on NTG 1.0 version (see my other video).
The author is asking for your help, in the engineering menu I pressed the button # 8 to update, after which I lost the sound, what should I do to get everything back?
Me too. How did you fix it
Mine doesn't show that shows different only one page and says system, tel, radio, swdl, sound, emc measure, ext player. 2012 c300 4matic i wanna access camera menu
Is yours an Audio20 or a COMAND?
@@killerhertzmercedes mine did not come from factory with camera and i have an android screen now
@@nicknick6960 This video is for the COMAND NTG 4.0 system? not sure why you have replied to this video when you have a totally different system?
Check the manual for your device.
Regards
@@killerhertzmercedes i have the 4.0 ntg i know that
@@nicknick6960 You previously said you had an Android
I have 2011 w218 cls and i didn't understand what did you say about the software updating is it good or not? And if i updated the software can i get back the old software?(the factory software)?
Dont update the software, you need a dealership to do this!
@@killerhertzmercedes i have press it, now i cant get back. Every time says “ Error on Update” how can i cancel it?
Hi i pressed on update and now its blocked and i dont have any option to exit.How can i quit?
How can I change the start mercedes logo to an amg ???
W212
@@V8hat you cannot.
KillerHERTZ Mercedes Modifications unfortunately,,, thanks
How do you make it from yellow to black and grey
You cant, they are different Firmware versions...
@@killerhertzmercedes I just did it earlier tonight lol
@@daveorlando8031 Please share with all
How can activate night vision in w212?
ua-cam.com/video/T1lBOrXJrDs/v-deo.html&ab_channel=KillerHERTZMercedes
How to change location from Japan to USA?
I installed a new command controller now it say that i need a program or firmware update?...can i do it here in the Engineering menu and how ?
You will need to get it on a STAR diagnostic machine & also have a firmware disc.
@@killerhertzmercedes sorry im talking about i installed the center console controller knob that spin to scroll and control the functions on the screen, also press down for enter or select.... and i got the NTG4 navigation update DVD .. that the firmware disc ? ...... do i still need to do the same procedures you mention?
@@killerhertzmercedes does it work with delphi ?
Vă rog să mă anunțați dacă puteți, am o mare problemă, nu îmi mai apare radio în media pe ecran. Ce pot face?
When i drive the volume lowers and when i stop the volume goes up to the normal level how do i solve this
hi thank u for ur amazing video?when I drive my car Mercedes w212 e350 2010 at first start distronic plus inoperative when I stop start it again it work sorry to hold brakes doesn't work to at the same time plz advise
on highway
Kassem Amade Check main battery
how do i check mileage fraud on my 2012 used w212 e220 cdi
Connect the car up to a STAR Diagnostic machine.
How do I save the setting because it doesn’t get me an option
change the option you want, then back up a screen and it will save it automatically.
@@killerhertzmercedes how do you rest all the settings
Hi, mine just looks complitely different…its SW build number is 16.500
Is yours grey/red/white?
@@killerhertzmercedes no, it looks just like the normal system with a few more options but nothing like yours…i mean i have much less options to choose feom
I think it is a really old firmware so i think the first step would be an update? Is it possible at home or only in a dealership?
@@Nick-wn3ys did you have any luck? I have the same problem
@@chrisretro9380 did not have time to deal with it lately, but i think the only solution will be to take it to dealership
What happens if you do a system reset on this menu
puts it back to factory settings
W212 2010 E550 dose color bar mean changing the ambit lighting ? And it worked find I’m so lucki to have BT now 😎🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿🙌🏿
The colour bar only tests the screen.
Hi i cant enter the engineering mode can you help me?
What version NTG do you have?
hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode
You need to press buttons in correct order, as per video
KillerHERTZ Mercedes Modifications tried it just like the vid and it didn’t work... 🤷🏻♂️
@@ghettospinners25 if it's 2015 it will not be NTG4 as in this video...
KillerHERTZ Mercedes Modifications ok yea my car is a 2016 E350 built 04/2015 guess I’m shit outta luck lol thanks for the reply
@@ghettospinners25 did u find out how? I have e350 2016 too and couldnt find a way to access engineering mode
I pressed software update by mistake. Now it’s showing me the message “Error on update”. Is there any way to reset it?
Joel anderson I think i got lucky. I kept hitting the comand knob and pressing the cd eject button. It would reset and after 30 seconds or so my cd (just a music disc) came out, and the system went back to normal.
Im sure it worked only cause I had a cd in the player
Joel anderson The cd was already in when I started. Once it went to the reset screen after pressing the comand knob, I hit the eject button. Took a few tries.
Joel anderson Take it to the dealership. If there’s any independent benz mechanics they might have an update disc
Do you fix that?How?
I have also NTG 4.0 in my W212 12/2009, with navigation and I can also enter the hidden menu, but the engineering mode looks different, i can find also the Bluetooth audio but it's not checked and it's greyed out so i cannot change it, someone any ideas?
This is for the Comand you have the normal 4.0 like me
Good day how do you save settings in emc measure mode I go to the fan settings for eg and its set to 60% and I change to 100% but as soon as I go out and come back its back to 60%
Can I activate bluetooth audio here?
HU Settings
- HU Parameter
(the following are the settings I put them in)
(1) BT contact plate: Not Installed
(2) LCT: Installed
(3) BT audio: On
(4) Audio Aux: Off (greyed out: not an option)
(5) Video Aux: Off
(6) Navi: installed
(7) BT: on
-back buttonx2
-pull command wheel down
- system reset
- reset - yes
- go to audio, then go to the audio tab again to bring up the drop down menu of audio options, select BT audio and activating audio device comes up, then the audio streaming screen
@@Rima-hh8db hi i have E220 bluetec 2015 , when i press it doesnt go engineering mode, when i pres red phone button + 7+ 9 it goes dealer mode, please help me to get in engineering mode
Is it possible to add XM Satellite radio ?..
Afraid not...
Can I change the sensitivity off the park distantie control with this?
No afraid not.
How would i bring up the engineering mode on a 2010 CL63 amg? I tried pressing the same buttons but it didn’t work.
But it seems useless what can you do in engineering Mode nothing really I want to change the colors of my screen or have a different Logo Pop is that possible like those two things?
No you cant with any system.
Accesed then what? What you can do, nothing significant, right?
See my other video on the reversing camera.
I went in and tbh I feel like I'm a bit better than a complete newb but a lot of it was like double Dutch to me
Alot of it is to me also!
@@killerhertzmercedes yeh I didn't understand most of it. Probs better to leave it before I blow something up
Hi, how can i put de amg logo?
You can only do this on NTG1 systems, nothing newer :(
I don't know why.. when i did it same way, the engineering menu is different with this video.
In my car, when i push call up + # + 1 button together, the screen is like this linked video below.
ua-cam.com/video/KzWqBeg3FRc/v-deo.html
Does anyone know how can i access the engineering menu like THIS video?
You don't know what you're doing do you?. 😅
???
@killerhertzmercedes that video gave me absolutely no information whatsoever about what it does going into developer mode.
@@brucemacdougall
The video is titled "How to access engineering mode".
Clearly you have difficulty reading and understanding titles.
You don't know what you're doing 🤣
@killerhertzmercedes do you know how to get android auto without having to pay 300 to mercedes for the infotainment system?
@@brucemacdougall So you insult me, my channel, then ask for help?
😂😂😂
How can i change the music equalizer from ECE to USA?
How do you activate the aux setting
ua-cam.com/video/dgKAZjS3IBQ/v-deo.html
How can I drive and watch DVD at the same time ?
You cannot as its illegal in virtually every country.
KillerHERTZ Mercedes Modifications yes you can stupid