paps, same problem here, nag red blink tapos di na mag on, dalawa kasi yung option sa shopee link, dalawa yung chip code, yung isa is TT3034& TT 3043 / FTD01N & FTD02P, Alin po b dyan dpat orderin??
ganito nangyari sa l805 ko same nang lights pag on! pag pinalitan kaya printhead magiging ok n sya? tapos nag bliblink pag ooff ko n yung power button/network and ink.. salamat po
Question Paps, ito lang ba ang possible cause? |Nag linis kasi ako ng Print Head tapos bumukas pa siya, after ilang seconds namatay na siya tapos umiilaw ng konti yung stop button katulad na katulad nyan.
My board had the same problem. I changed to new board (as I couldn't find the transistor). Printer worked for 3 minutes and now same problem like the video. What could be the problem? Faulty power supply. Print head short?
@@fromnothingtosomething2848 Good day, i have really enjoyed the video. my printer has the same problem and i think you have answered the cause to failure here. It had overflowed ink and now this same problem. My question is, what should i do to prevent short circuit when i replace the board due to ink which overflowed because of the ink damper bursting.?
hello fred, will headprint still print or will i need to replace it either. thank.
No need friend if the head is good.
Sir maine dusra logic card chang karwa fir 1 din chalne k baad same problem hua to ab kya problem ho sakta hi
how we purchase this itoms...??
I ordered in shopee
The head will be ok.?
Sar Mere printer mein bhi sem problem hai kya donon trangister Badal Dene Se theek ho Jaenge
Please check both then replace the damage only
paps, same problem here, nag red blink tapos di na mag on, dalawa kasi yung option sa shopee link, dalawa yung chip code, yung isa is TT3034& TT 3043 / FTD01N & FTD02P, Alin po b dyan dpat orderin??
yan po yung variation TT or FT po??
Is this support L800?
Yes Sir but you need to check if the transistor is the same
ganito nangyari sa l805 ko same nang lights pag on! pag pinalitan kaya printhead magiging ok n sya? tapos nag bliblink pag ooff ko n yung power button/network and ink.. salamat po
Welcome po 😁
@@fromnothingtosomething2848 pag napalitan po b nang printhead gagana n ulet printer ko?
@@pJgaming-zc5zh check mo muna boss yung transistor
Question Paps, ito lang ba ang possible cause?
|Nag linis kasi ako ng Print Head tapos bumukas pa siya, after ilang seconds namatay na siya tapos umiilaw ng konti yung stop button katulad na katulad nyan.
Sa palagay ko boss nabasa din yung pinagkakabitan ng ribbon na wire sa printhead kaya nashort din yung sayo.
Kailangan ko lang ba patuyuin yun tapos palitan ng transistor yung motherboard?
@@fromnothingtosomething2848
You did not check those two transisters, but removing them, how come ?
Yes, but in your case if you want, test it before you remove it. So that you can check if the transistor is faulty.
Sir, same sa L805 ko. Pwede magpagawa sayo Sir?
Taga saan po kayo Sir?
anong transistor gamit mo boss for l805? FT or TT?
how do you know if transistor lang tong papalitan kay sa board?
Try nyo pong i tester Sir.
@@fromnothingtosomething2848 THANK U
Buong araw kami nag clean tas di na maon ngayon ano po gagawin? Please answer po🥺
Di Kasi makompleto Yung six colors Di Naman Ako nagkamali sa paglagay ng ink
Ganyan po ba nang yari Maam?
After manual clean it happens like that what is the main reason
I think the printhead is shorted replace the printhead and try again
@@fromnothingtosomething2848 ok
@@Engkima-v3sdid it work?
My board had the same problem. I changed to new board (as I couldn't find the transistor). Printer worked for 3 minutes and now same problem like the video.
What could be the problem? Faulty power supply. Print head short?
I think your printer has overflowed ink or cleaning solution and it is the possible cause of the short circuit of the board
@@fromnothingtosomething2848 Good day, i have really enjoyed the video. my printer has the same problem and i think you have answered the cause to failure here. It had overflowed ink and now this same problem. My question is, what should i do to prevent short circuit when i replace the board due to ink which overflowed because of the ink damper bursting.?
@@josiasshawa2354 Just simply dry your printhead atleast 1 week before installing it to make sure that no ink or cleaning solution inside the board.
I am facing the same problem but this component is not available in my city, please give the link from where it can be purchased thanks in advance
@@fromnothingtosomething2848 mere power button ke pass se short circuit ki halki si aawaj aayi. kya fault ho sakta hai. ink bhi overflowed tha
where to buy pair transistor
In my description there is link
IC NAME
shopee.ph/product/498714504/17760157985?
This one Sir
Same problem sa printer na inaayos ko .pero Hindi pa ko pa pinalitan ung transistor