Hi all! I have finally redone the sound on the video. THANK YOU all for your support. The new upload is here: ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
I’m new to your channel, hi from Texas!! I love your wreath , your video went silent about halfway through so I didn’t get to hear what you were doing but it did help me just by watching you. Thank you for sharing.
Sorry for the audio troubles, it sure what’s going on. I cut the big pieces at 30”, and the smaller pieces at 10”. I also just made a new video doing a similar table swag since there’s something wonky with the sound 🩷.
Thank you. Also, thank you for the feedback, it helps me for sure! After seeing your feedback, I uploaded a new swag video last week and didn’t add any fast forward clips. 🫶🏽🫶🏽
Sound went out just as you were just starting to give mesh measurements, ugh, closed caption also didn't work. it"s lovely and I want to make one for a birthday gift. Thank you.
You need to redo this video. Just as you're about to start with the deco mesh the sound stops. Then the sounds comes back on but then it goes out again. Wasn't able to hear any of the lengths you cut the deco mesh or the ribbons.
Sorry for the audio troubles, it sure what’s going on. I cut the big pieces at 30”, and the smaller pieces at 10”. I also just made a new video doing a similar table swag since there’s something wonky with the sound 🩷.
Hey. Yes, not sure what happened. I pinned a comment with a link to the new vid with sound, but also, here’s the link for the video. Thank you for watching 🫶🏽🫶🏽🫶🏽🫶🏽. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=wf06DRc4e1rVsguJ
It's an amazing swag but most of video sound is hone,doesn't come back in enough make this tutorial worthwhile ND REALLY WOULD LOVE GET THIS TUTORIAL FROM YOU BUT ITS NIT HAPPENING WITH THIS VIDEO DUE TO SOUND GOING IN AND OUT
Heyy. So sorry for the inconvenience. Not sure what happened. Here is the updated video with sound 🩷. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=pKrRNfIOMkKrksfm
There was no sound for most of the video, lt came and went so don’t have any idea of sizes or most of what was being done. Too bad too l would have liked to heard the instructions.
Hi all! I have finally redone the sound on the video. THANK YOU all for your support. The new upload is here: ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
I’m new to your channel, hi from Texas!! I love your wreath , your video went silent about halfway through so I didn’t get to hear what you were doing but it did help me just by watching you. Thank you for sharing.
WOW. Lovely. Makes me want to have a tea party!
It’s beautiful,I’ve got a rail will make one. Thanks for sharing. Love watching you.
Absolutely beautiful
This swag is gorgeous.
I am so thankful you uploaded the video with the sound because the piece is gorgeous! Okay im heading there now!
Beautiful! How many inches did you cut your mesh (the voice and transcript stopped in the middle of your mesh description. Thank you!
Same for me the voice and transcript stopped
Sorry for the trouble. I just re-uploaded
I made a wreath using the same deco mesh and the gold snowflake ribbon. This is beautiful!
This is a gorgeous swag. I love the rose gold.
Awww, thank you so much!
Gorgeous and easy to make.
Beautifully designed you are amazing
Amazing using idea for a banquet I am decorating. Thank you
What a beautiful idea love it
Thank you 😊
Hello from Memphis. That is beautiful. I will have to try that.
Hi 👋🏽!! Thank you so much 😊.
This is very beautiful
Thank you 😊
Lovely!
Needs sound, beautiful centerpiece👍
Thank you 😊. Here is the video with the corrected sound 🩷 ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=kfWdZQ1wEOuPRp7T
Beautiful!
Your volume keeps coming and going. But I love it!😊
Beautiful ❤
Where did you get your ribbon and mesh from. It’s absolutely gorgeous
I love it! 👍👍👍👍👍
🫶🏽🫶🏽🫶🏽🫶🏽
Do you have a video tutorial for the other center piece you showed at the beginning? Love this centerpiece.
Hi! Unfortunately, I don’t. However, it was made the same way just using a different color mesh/ribbons ❤️.
Georgous Swag, 🤎🩶🤎🩶
I love this but i really love the one in the background in the beginning wish there was a video on how to do that😢
I Don know why your sound went out as soon as you started making the ruffles
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Love this! Can you tell me the left of your mesh cuts? the sound keeps going in and out.
Sorry for the audio troubles, it sure what’s going on. I cut the big pieces at 30”, and the smaller pieces at 10”. I also just made a new video doing a similar table swag since there’s something wonky with the sound 🩷.
@@fourthirteendesignllc Thanks!
The same for me no sound
@@fourthirteendesignllcwas that the thanksgiving one?
I subscribed to your channel OMG you make beautiful stuff and make it seem so simple I'm a beginner and I'm going to give it a try
Well shucks, thank you 😊
The audio ran out, did you make another video with directions?
Im sorry but i cant here you your audio is off. I see that your work looks beautiful.
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Plan to make this table swag but what size do you cut the mesh? You have done a beautiful job with the table swag!!🙏
Thank you 😊. Depending on the look I’m going for, I cut either 20” or 30”.
The sound went out. What is the length you cut?
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
That swag is beautiful but I prefer to watch someone who doesn't fast forward.
Thank you. Also, thank you for the feedback, it helps me for sure! After seeing your feedback, I uploaded a new swag video last week and didn’t add any fast forward clips. 🫶🏽🫶🏽
Hello! Did you ever redo this video? We missed a lot of detail due to sound going out
Hi. I did, so sorry for the sound troubles. Here's the link to the reuploaded. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Sound went out just as you were just starting to give mesh measurements, ugh, closed caption also didn't work. it"s lovely and I want to make one for a birthday gift. Thank you.
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Swag is beautiful, I love the rose gold mesh. Can you tell me where you purchased the ribbon?
Thank you. I believe I purchased it from Hobby Lobby
Hello. Your swag is soooo beautiful. I know it’s been awhile, but do you remember where you purchased your deco mesh from?
Thank you. I purchased it at Hobby Lobby. It comes out almost every year with the Christmas mesh.
Hi do you have the wreath tutorial that you made for your customer last year
How long are your deco pieces. I have no audio
I’m I the only one that has no audio
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
😍stunning
The sound died after you got your wires glued in.
Can you please post the link to your other swag video because the sound went out in this one
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Pretty mesh & ribbon. Can I get the links please?
Thank you. Both were purchased from Hobby Lobby
Loved the video until the sound shut off
The sound keeps cutting off you can’t hear you
Have you made one and placed battery operated candles in it?
I haven’t, but I’ll definitely do one. That would be beautiful
You need to redo this video. Just as you're about to start with the deco mesh the sound stops. Then the sounds comes back on but then it goes out again. Wasn't able to hear any of the lengths you cut the deco mesh or the ribbons.
I thought my speaker went out 😂lol
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
I know
Your sound stops working priot to cutting the mesh
The audio is lost at prepping the mesh. At 4:43
Hi Renee. I reposted the video with corrected audio. The link is pinned at the top of the comments 🩷
79 cent 3 pk paint stirrer 5 gal at Walmart
The sound keeps going off
No sound ?
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
How long did you cut mesh ? Your audio isnt working for me.
Sorry for the audio troubles, it sure what’s going on. I cut the big pieces at 30”, and the smaller pieces at 10”. I also just made a new video doing a similar table swag since there’s something wonky with the sound 🩷.
@@fourthirteendesignllc no worries!! Thank you very much
Can you cut the mech in half
Hi! Yes, you can cut the pieces to be shorter. It will affect the fullness of the swag, but still will be pretty ❤️.
Volume not on most of video.
What happened to the sound
I lost sound after gluing the pipe cleaners. My volume is up. Idk what happened😏
Oh no. I might redo this video. I’ve seen a lot of comments lately of the sound going out and I’m not sure what happened. Stay tuned 😊
Sorry for that. I just uploaded a new video. 🩷
Sound was out
Hey. Yes, not sure what happened. I pinned a comment with a link to the new vid with sound, but also, here’s the link for the video. Thank you for watching 🫶🏽🫶🏽🫶🏽🫶🏽. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=wf06DRc4e1rVsguJ
esta hermosa,pero el audio esta bien malo,no se escucha
Perdón por el problema de audio. Aquí os dejo el enlace al vídeo corregido: ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=X0pBJMuSgkgE-uys
It's an amazing swag but most of video sound is hone,doesn't come back in enough make this tutorial worthwhile ND REALLY WOULD LOVE GET THIS TUTORIAL FROM YOU BUT ITS NIT HAPPENING WITH THIS VIDEO DUE TO SOUND GOING IN AND OUT
Heyy. So sorry for the inconvenience. Not sure what happened. Here is the updated video with sound 🩷. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=pKrRNfIOMkKrksfm
the sound went out
Not sure what happened to the video sound 🥲. I recently uploaded a new one since this one is a bit wonky.
@@fourthirteendesignllc ok, I’ll check it out.
There was no sound for most of the video, lt came and went so don’t have any idea of sizes or most of what was being done. Too bad too l would have liked to heard the instructions.
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
I'm new
Please fix your sound
So sorry about the sound issues. I have now re-uploaded it with fixed sound. ua-cam.com/video/ErF6g_kYkrE/v-deo.htmlsi=qInmiog4NdN-hsQA
Beautiful! But way too much talk, talk, talk! Just get on with it. This not a difficult project so lets move along.
Thank you for your feedback. Have an amazing day!
How rude, lady
Your nails are way too distracting!! :(
Beautiful ❤