Please take 02 steal needles or cut 2 pieces of steal spring,cut it and make these straight about 1 inch ,let tie with copper multy strain and then solder these to each testing prob,now you will able to test any micro smd pin.you will feel comfort..i want to see this in your next video.thanks
Tevzs sir I am very impressed your video please let me know i some body has cut on ckv but after 2months again no disdply condition please let me know what to do next
আমার একটা ৩২ ইঞ্চি এলইডি ব্ল্যাক স্ক্রিন,,, ডিসপ্লে ঠিক আছে। আমি এটাতে মেমোরি কার্ড লাগানোর কিছুক্ষন পরে স্ক্রিন কালো হয়ে যায়। দুইদিন পর টিভি অন করে যখন সোর্স বাটনে ক্লিক করলাম অপশন আসলো। কিন্তু আমি পরিবর্তন করার আগেই অপশন চলে যায়। তারপর থেকে আর সোর্স বাটন চাপলেও কিছু আসেনা। ব্ল্যাক স্ক্রিন থাকে। রিমোট ব্যবহার করে অন অফ করা যায়। এছাড়া আর কিছু হচ্ছেনা। কিভাবে সমাধান করতে পারি। একটু সহযোগিতা করবেন। বিঃদ্রঃ টিভি চায়না স্যামসাং। দয়া করে, আমার করনীয় কি জানাবেন।
Hey tevz is there another way to fix it without cutting those lines and can you tell us the purpose of those lines. Will cutting them affect the picture quality?
@@tevzTVTevatronics effect NOT affect You could also write : poorer resolution on the bad CKV side is the result You have yet to learn the difference in meaning between the two Invest in a DICTION-ary Make sure you are paying attention to detail and that the brain sees exactly what the eyes are looking at
@@andrew_koala2974That's not the most important thing. He isn't here to teach English but how to fix electronics. He could have chosen to do it in his native language but chose to use his basic English to help a larger audience. As long as he is able to express himself even with his limited English, I am totally fine. I'm glad to have been learning so much from him.
Hi tevz: I'm in need of buying a new analogue multimeter, the one you use looks quite well made. Do you know if they're still available ?. Thanks: Andy
Hi Tevz: Thanks for the reply buddy, I noticed yesterday that your meter was made by Wheeler so looked them up on Google. They are still made but apparently only available in the Philippines, sadly none of the companies that stock them will ship to the UK 😮. Keep up the good work 👍.
Buy one made by SANWA in Japan Be careful of CHINESE CLONES that sound similar and the letter N is substituted with M = SAMWA - Easy to be caught out if not paying attention to detail buy what you can comfortably afford - and make sure the meter is genuine SANWA Also - attach a label to the rear with the DATE when the battery is installed - ALKALINE batteries are corrosive when leaking - and will damage the meter -- so check the battery condition frequently. I prefer to use CARBON ZINC 9v batteries - instead of ALKALINE - AS THERE ARE FEWER PROBLEMS WITH THEM
Whenever i work on a tv there are never any useful markings. I have no idea which lines are ck. Whenever videos show they are the lucky ones with everything labelled.
السلام علیکم
شکرا بکم یا اخی
the best training.
thank you
❤❤❤❤❤❤❤
Subrang lupit mo idol...slamat sa pag share ng video mo...sana madami ka pang matutulongan sa mga bagohan sa mga video mo.👍👍🏆
I learn a lot with your videos thank you very much. always pending your new videos👍👍👍
Happy to hear that!
Thank you sa pag share sa tutorial lodz! Dagdag kaalaman na naman.👍
You video is very helpful, I improve alot with your video
Muito bom, ótima explicação e ótima solução.
Watching from Santa maria nabunturan Davao de Oro Philippines
That's very helpful, thanks again Tevz..👌
No problem 👍
Good work. Great explanation. Looks like you enjoy your vocation. Thank again Mr. Tevz, ever waiting your videos. 👋🙏👏👍🙋♂️
More to come!
@@tevzTVTevatronicskeep it going bro. can i request video about how to check component is still good or bad. thanks bro
Tevz , you are just awesome! Thank you so much !
My pleasure!
Good 👍 my senior
Brilliant upload. Thanks for showing it.👍👏👍👏 🏴
Great job Sir,I enjoyed every of your hits videos
Glad you like them!
Thanks sar,i love watching your video,keep up ,Good day sar.
Always welcome
Please take 02 steal needles or cut 2 pieces of steal spring,cut it and make these straight about 1 inch ,let tie with copper multy strain and then solder these to each testing prob,now you will able to test any micro smd pin.you will feel comfort..i want to see this in your next video.thanks
Hey senior how are you, i gained lots of information, and now i am an display specialist, my local technician always contacts me for problem
nice
Your no pls
Aprendiendo a distancia, gracias y éxitos, saludos desde Venezuela
Very good boy
Parabéns pelos vídeo, show de bola!
Grande huomo....grande capo...
Very helpful to know, thanks.
You're welcome!
Love your channel
Good. Thank you. Have a nice day.
Great job
thank you (BRASIL).
God bless you dearly
Very good, thank you
ty
Tevzs sir I am very impressed your video please let me know i some body has cut on ckv but after 2months again no disdply condition please let me know what to do next
Thanks for sharing this video master tevz TV
Good job👍👏
Thanks
Good one
I used straight piece of hard thin spring with my 3 multy meters.
Muito bom, parabéns
You are fantastic man💖
Thank you so much 😀
Awesome job
Thanks!
Watching po
Hello. Please tell me some tips that let me to know the problem from pannel or t-con?
I offten confuse when identifying the main issue.
Tvz, você é muito inteligente.
sir great information video
Thanks
Good job po sir tevz tv...👍👍
Thank you very much
Sir what is the defference between lc1 lc2 and ckv signals and where they goes inside the panel
Sir please put the answer for this comment
Bravo:)"googleit" ]
/& have a good one mate. (;
Great job 😊
Thank you! 😊
Good boy
Nice videos dada
Thanks
Great master never disappointed me❤❤❤❤❤
Super nice video sir
Perfect
LCD laptop the same problem can fix like this or not sir?
differnt from laptop
আমার একটা ৩২ ইঞ্চি এলইডি ব্ল্যাক স্ক্রিন,,, ডিসপ্লে ঠিক আছে। আমি এটাতে মেমোরি কার্ড লাগানোর কিছুক্ষন পরে স্ক্রিন কালো হয়ে যায়। দুইদিন পর টিভি অন করে যখন সোর্স বাটনে ক্লিক করলাম অপশন আসলো। কিন্তু আমি পরিবর্তন করার আগেই অপশন চলে যায়। তারপর থেকে আর সোর্স বাটন চাপলেও কিছু আসেনা। ব্ল্যাক স্ক্রিন থাকে। রিমোট ব্যবহার করে অন অফ করা যায়। এছাড়া আর কিছু হচ্ছেনা। কিভাবে সমাধান করতে পারি। একটু সহযোগিতা করবেন।
বিঃদ্রঃ টিভি চায়না স্যামসাং। দয়া করে, আমার করনীয় কি জানাবেন।
thanks 👍👍👍
Thank you too
Will it work if I just replace the DC to DC IC?
Thank you so much
A one but sir Another str next video supply section repair
Ok sure
What happens if it is fully shirted can the same method work?
what do you mean?
@@tevzTVTevatronics if the ckv line is fully shorted can the same method work?
@@jeepers18304 yes
Hey tevz is there another way to fix it without cutting those lines and can you tell us the purpose of those lines. Will cutting them affect the picture quality?
its is the only way. poorer resolution on the bad ckv side is the affect.
@@tevzTVTevatronics
effect NOT affect
You could also write : poorer resolution on the bad CKV side is the result
You have yet to learn the difference in meaning between the two
Invest in a DICTION-ary
Make sure you are paying attention to detail
and that the brain sees exactly what the eyes are looking at
@@andrew_koala2974That's not the most important thing. He isn't here to teach English but how to fix electronics. He could have chosen to do it in his native language but chose to use his basic English to help a larger audience. As long as he is able to express himself even with his limited English, I am totally fine. I'm glad to have been learning so much from him.
@@andrew_koala2974don't be a butthole 🤨
@@danieltenkorang8306 absolutely right brother..
I'm a new fan❤❤❤
Very good
👍👍
so, if not needed why do this signal is on the board?
Is the short between tracks in the glass panel or is one of the COF IC's to blame?
Good job sir
Hello. How did you know that the problem is with the address bar?
mostly like the problem.
Sir three tansrfmor pfc power supply repaing proses I am waiting for video
You da man!
Super
❤
Please am having CRT tv n when I on it ,the screen come n go,it flash back thu
s it on n off it self . please help me to solve the problem
Hi sir i cut 1 of the ckv lines and im getting burn mode now how can that be fix
Hi tevz: I'm in need of buying a new analogue multimeter, the one you use looks quite well made. Do you know if they're still available ?.
Thanks: Andy
Thats 6 years old already, I think there is no more model like it anymore.
Hi Tevz: Thanks for the reply buddy, I noticed yesterday that your meter was made by Wheeler so looked them up on Google. They are still made but apparently only available in the Philippines, sadly none of the companies that stock them will ship to the UK 😮. Keep up the good work 👍.
Buy one made by SANWA in Japan
Be careful of CHINESE CLONES that sound similar and the letter N
is substituted with M = SAMWA -
Easy to be caught out if not paying attention to detail
buy what you can comfortably afford - and make sure
the meter is genuine SANWA
Also - attach a label to the rear with the DATE when the battery
is installed - ALKALINE batteries are corrosive when leaking -
and will damage the meter -- so check the battery condition frequently.
I prefer to use CARBON ZINC 9v batteries - instead of ALKALINE -
AS THERE ARE FEWER PROBLEMS WITH THEM
Whenever i work on a tv there are never any useful markings. I have no idea which lines are ck. Whenever videos show they are the lucky ones with everything labelled.
Hello ,thanks for your work ...can you please help me to find a ckv linea. On Sony kd-55xe8505....
hi tevs my tv is 4 inch hisense showing verticle half black and half picture
Please which of the ics generates the ckv
Back side cooking sound😅
Kaha se ho bhai
Sir please how can i identify ckv lines. Thank you very much Sir
Sir u know Android tv softwares update
Lopez Melissa Gonzalez Daniel Johnson Kimberly
👏👏👏👌👌👌🙏🙏🙏
OK
Why don't you simply use a wick/braid to desolder those solder bridges?
I am pretty sure he cut the traces between as those are not solder bridges
Yes there is a gap between the two solder bridge that looks like one
==========______
Test prob. Needle
Bicaranya pakai bahasa Indonesia GK bisa..
Hall Deborah Clark Donald Clark Frank
Стол зачетный.