Hi. Just noticed that in the video you installed the teflon tape counterclock wise the first time but the second one was indeed the correct way...thanks for sharing. Goodluck.
@@florino6556 you don’t have to remove the screw from the 3-way safety valve. Only if you wish to drain the water heater through the valve you need to remove the screw. It’s there so no one can accidently drain the water heater.
Efectivamente, la dirección de la cinta de teflón estaba equivocada. Es mejor aplicar en el sentido de las agujas del reloj. Las mangueras flexibles tienen juntas tóricas, la válvula de seguridad no. Incluso con los sellos de goma, se recomienda usar cinta de teflón para aislar los conectores de la rosca.
@@chazhodge8768 no, this is how it‘s done. The valve drains small bits of water to the siphon. In the EU no Expansion vessels are being used with unvented storage water heaters.
Hi. Just noticed that in the video you installed the teflon tape counterclock wise the first time but the second one was indeed the correct way...thanks for sharing. Goodluck.
You are right. It is better to apply the teflon clock wise. Thanks
Also he didn't remove the screw from the directional valve
@@florino6556 you don’t have to remove the screw from the 3-way safety valve. Only if you wish to drain the water heater through the valve you need to remove the screw. It’s there so no one can accidently drain the water heater.
@@KIIPimport it's pressure release valve.Some of them don't even have that screw
Lo primero, tienes que saber colocar el teflón. Y luego saber que los flexibles llevan orings
Efectivamente, la dirección de la cinta de teflón estaba equivocada. Es mejor aplicar en el sentido de las agujas del reloj. Las mangueras flexibles tienen juntas tóricas, la válvula de seguridad no. Incluso con los sellos de goma, se recomienda usar cinta de teflón para aislar los conectores de la rosca.
браво ❤
How to replace the hose?
Не дай бог такого сантехника пригласить. 🤔
The background music is great. Can i have a link to the artist?
Where does the pressure go? Is there no vessel?
A pressure release valve is included in the package. It’s the part that is attached to the cold water inlet. No expansion vessel needed
@@KIIPimport It’s an unvented heater, you have to allow for expansion, a pressure release is a last line of defence 🙄
@@chazhodge8768 no, this is how it‘s done. The valve drains small bits of water to the siphon. In the EU no Expansion vessels are being used with unvented storage water heaters.
@@KIIPimport 😂😂 ⏰ 💣
How many mint needs to het woter
Manguitos electrolítico??
Ils faut que tu installé les raccord galvanisé
E ovako se ne radi,dihtuje tamo gdje ima dihtung.
Preporučuje se malo teflonske trake. Izoluje konektor od navoja. Nije neophodno ali se preporučuje.
Bel video, mi sono iscritto al tuo canale, così contribuisco alla tua crescita