ATS how it works

Поділитися
Вставка
  • Опубліковано 24 січ 2025

КОМЕНТАРІ • 82

  • @corneliusmotsisi4750
    @corneliusmotsisi4750 2 роки тому +4

    The only video that made sense. Thank you 🇿🇦

  • @josepeixoto3384
    @josepeixoto3384 2 роки тому +6

    Great video
    Finally,after 9 or 10 videos i found yours and it exactly explained what i was after:
    i wanted to make Solar Power the Primary Power, and ONLY your video explains it clearly; thanks

  • @samsno3667
    @samsno3667 3 місяці тому

    Nice; video, stright forward to think of myself as "smart-er" now; can you manually set it to one and then kick it for the other? Or does it have to be set to grid and kick in for backup?

  • @expjw
    @expjw Рік тому +1

    Can this device also be used in a dual 12v DC input setup that powers a DC fridge?

  • @RyanBautista
    @RyanBautista 2 роки тому

    Can you explain the wire connections from main circuit board pls. It doesnt make sense to me, don’t know where it was connected

  • @wilfoxreal8641
    @wilfoxreal8641 9 місяців тому

    Thanks a lot for this video, its very helpful and Informative. If it has a diagram included, that will be very much appreciated though its already much appreciated.

  • @chamodyachiranmadana5545
    @chamodyachiranmadana5545 Рік тому

    Is it not possible to provide a modified sine wave inverter for source B? When the inverter is turned on, there is a loud noise. (when source A is not set to Auto)
    Is that because of modified sine wave? Normal ceb power is given to Source A. When both Source A and B are given, when A is missing, Auto will come to B. But when source B is turned off and ceb power is lost, when source B is turned on, source B does not fall in auto, there is a loud noise.
    Why is this happening?
    Pure sine wave will be fine?

  • @thabisomodisane1435
    @thabisomodisane1435 2 роки тому +1

    For winter its good especially in RSA with bigger Storage Battries 30kw system any stage youl be safe

  • @valmir144
    @valmir144 Рік тому

    The only video where one can clearly see the output wiring to the load! 👋👋👋

  • @chuckwebb7564
    @chuckwebb7564 3 роки тому +1

    Will it work with Enphase system and their microinverters?

  • @Arthurfxconsultant
    @Arthurfxconsultant Рік тому

    Hey could something like this work to Power air condition by solar?

  • @jtto6364
    @jtto6364 2 роки тому

    BTW, if you want 220/240v in the US
    220v P2 is for euro countries not the US. Euro uses a single hot wire 220/240v, US uses 2 hot wires.
    From what i was told. So US needs a 220/240v P3.
    If I was told wrong, please correct me

  • @rpeonruzzel1294
    @rpeonruzzel1294 3 роки тому +1

    Can you recommend me or link me, if there is an ATS that is higher than on your video? like 200amphere rating and higher ATS. Thank you, Stay Safe!

  • @dancehallexposed6193
    @dancehallexposed6193 5 місяців тому

    My question is, the N side of my switch the UN light is on but the NON light is not and when i turn on my generator the R side both lights are on but on the N side only one and it hum like hell, what is the cause of this please.

  • @976rick1
    @976rick1 3 роки тому +1

    Can this transfer switch power the entire house or is it used as a single outlet (1 breaker).

    • @jedidiah5131
      @jedidiah5131 3 роки тому +1

      It will supply the entire house.....but not 220/240 as I believe you will need a 3 phase transfer switch like this one.(hot, ground, neutral)

    • @mohmad2822
      @mohmad2822 3 роки тому

      @@jedidiah5131
      Can you give me a link to an article in Wikipedia about the line hot stream? Because I searched this site and couldn't find it.

  • @surferles589
    @surferles589 Рік тому

    Question please. What if solar only generates 80%? Can Emergency supply the extra 20%? Or is it only one or the other?

    • @vet137
      @vet137 Рік тому +1

      1 or the other not both

  • @darlynneconde3735
    @darlynneconde3735 2 роки тому

    Where to buy the apparatus?

  • @rosiegonzalez167
    @rosiegonzalez167 2 роки тому

    Can we see how it’s connected to the panel ? It doesn’t make sense to me

  • @mohmad2822
    @mohmad2822 3 роки тому

    What is the difference between this and a *digital transfer switch?*

  • @westcountry_sailing
    @westcountry_sailing 2 роки тому

    If the solar power is coming from battery storage, how do you tell the switch when to switch power source to prevent killing your batteries?

    • @Theo-de-Koning
      @Theo-de-Koning 2 роки тому +1

      Read there "solar power SYSTEM".
      Battery protection is in THAT system.

  • @felixjrsanbuenaventura1791
    @felixjrsanbuenaventura1791 Рік тому

    indeed, MAKE BEFORE BREAK IS BETTER THAN BREAK BEFORE MAKE SCHEME !

  • @md.bidduthossen3063
    @md.bidduthossen3063 10 місяців тому

    Available in Bangladesh???

  • @xelpamintuan3953
    @xelpamintuan3953 2 роки тому

    GOOD DAY SIR BOSSING ASK KO PO ANO KLASE SOLAR PANEL PARA SA HOUSEHOLD NA MAY CONSUMO NG IVERTER REF 1HP AC 3/4 AC ELECTRIC FAN WASHING MACHINE AT LED LIGHTS BULB MAGKANO PO KAYA SOLAR PANEL? TNX PO?

  • @cyrildiolola8616
    @cyrildiolola8616 2 роки тому +1

    can I use backup line with DC voltage

    • @Anyvideowilldo
      @Anyvideowilldo  2 роки тому +1

      Hello this is only for AC

    • @vet137
      @vet137 Рік тому

      backup MUST be AC so use a DC to AC convertor if you want DC as backup

  • @sanjaykumarsanjay8921
    @sanjaykumarsanjay8921 Рік тому

    Kaha pe milata hai

  • @aldrin.sarmiento
    @aldrin.sarmiento 2 роки тому +1

    can this work with 12v

  • @BurRun-kt3tf
    @BurRun-kt3tf 4 дні тому

    Thank you

  • @jaimetemplo3726
    @jaimetemplo3726 3 роки тому

    When we buy that?

  • @deepakprasanna7680
    @deepakprasanna7680 3 роки тому +1

    is there any solution about the power interruption? Switching from another source from the other is fine. but how to get rid of the interruption? I want to switch power source without interrupting the power in the Load.

    • @mohmad2822
      @mohmad2822 3 роки тому

      The device must be automatic.

    • @deepakprasanna7680
      @deepakprasanna7680 3 роки тому

      @@mohmad2822 even when its automatic, it will still interrupt the power flow in seconds.. that what I want a solution. Switch the power source without interruption of power flow, even in milliseconds.

    • @mohmad2822
      @mohmad2822 3 роки тому +1

      @@deepakprasanna7680
      If the transfer switch you have is like the one in the video, then this device suffers from a slow transfer between two power lines.
      Because it contains a normal circuit breaker, the conversion process will be fast when it is through the "Relay" or "Contacto"r.

    • @deepakprasanna7680
      @deepakprasanna7680 3 роки тому

      @@mohmad2822 good idea.. if you don't mind, can you refer to some model or brand with the same capacity in video? thankx a lot.

    • @mohmad2822
      @mohmad2822 3 роки тому

      @@deepakprasanna7680
      It must be box inside electronic components and the conversion is via relay inside it, and it does not contain the option of manual switching, I cannot mention a specific brand because I am from the Arab world and we do not have a brand available all over the world and there are no local companies in the West that manufacture like the one we have except rarely, I suggest that you make an ATS system that will be a "Change Over" without electronic components, sturdy and easy to maintain. This is the best option at all.

  • @穩贏綠
    @穩贏綠 2 роки тому

    How to buy?

  • @mahmudsobuj328
    @mahmudsobuj328 4 місяці тому

    2 meter 1 genaretor auto change over connection plz🙏🙏

  • @seraficaneildeo7438
    @seraficaneildeo7438 3 роки тому

    Sir can we use gerator set for the reserve power

    • @klon2ha
      @klon2ha 3 роки тому +1

      Of course you can. You'll just have to set the switch to manual instead of automatic.

    • @amossimango9984
      @amossimango9984 2 роки тому

      @@klon2ha Why yo manual

  • @laminjallow153
    @laminjallow153 7 місяців тому

    Good explanation

  • @AlexAlex-pp5no
    @AlexAlex-pp5no 2 роки тому +1

    10Q very much

  • @mohmad2822
    @mohmad2822 3 роки тому +2

    This explanation is incorrect, because the internal parts were assembled inside a small box, while we want the explanation to be by reviewing each piece of the device independently.

    • @Theo-de-Koning
      @Theo-de-Koning 2 роки тому

      For using that ATS is not needed to look in the inside.
      The same when you install other equipment like converter, battery etc.

    • @mohmad2822
      @mohmad2822 2 роки тому

      @@Theo-de-Koning
      It seems that you do not know what the ATS system is, for example, it consists of contactors, phase fillers and others. As for what is explained in the video, it is brief in a small device with few specifications.

  • @earthenergyhex
    @earthenergyhex 2 роки тому

    no neutral or ground?

    • @Theo-de-Koning
      @Theo-de-Koning 2 роки тому

      "No neutral"?
      What is then coming true the cables?
      Ground is always separated and is local. May NEVER have a switch.

  • @edwarddelarosa2096
    @edwarddelarosa2096 2 роки тому

    Paano kng sa genset mo starter paano Aandar un

  • @khaleda4393
    @khaleda4393 3 роки тому

    How to apply a 3min delay time while switching both sources?

    • @coolhawk2003
      @coolhawk2003 3 роки тому

      output wire it to a timer first maybe

    • @vet137
      @vet137 Рік тому

      can't

  • @mervingujilde3392
    @mervingujilde3392 2 роки тому

    Ilang amper po

  • @romeowhiskey1146
    @romeowhiskey1146 2 роки тому

    UNFORTUNATELY...the 'buy it' LINK above doesn't work.
    Company Out of Business?

    • @jtto6364
      @jtto6364 2 роки тому

      There are many sellers. All sell rebranded. I just bought 1 from Amazon

  • @vanstaden
    @vanstaden Рік тому +1

    You switched the R and N around. N= Grid power, as this is your normal power. R= RESERVE power, which is your inverter or generator. You should swap your connections

    • @vet137
      @vet137 Рік тому +1

      Because he wanted SOLAR as primary

    • @vanstaden
      @vanstaden Рік тому

      @@vet137 doesnt matter, its still switched around. A C.O.C will not be issued this is not industry std connections

    • @MisterPikol
      @MisterPikol Рік тому

      @@vanstaden but I would do the same in a diy solar system, use solar and batteries until they're depleted and switch to mains then.

    • @vanstaden
      @vanstaden Рік тому

      @@MisterPikol ? Wtf....

  • @sanjaykumarsanjay8921
    @sanjaykumarsanjay8921 Рік тому

    Hmkol Lena hai

  • @jaimetemplo3726
    @jaimetemplo3726 3 роки тому

    But how much?

  • @samuelverdeflor7768
    @samuelverdeflor7768 4 роки тому

    Great product..

  • @emmanuelojala2393
    @emmanuelojala2393 Рік тому

    Good wok

  • @mehmedmehmedov5901
    @mehmedmehmedov5901 3 роки тому

    NICE

  • @deabreurich6430
    @deabreurich6430 3 роки тому

    @0.45 N is said to be off grid power supply and R as Utility supply. Later on in the video @ 2.47, it's contrary!!!!! Do it correctly guys, the world is watching 😠

    • @josepeixoto3384
      @josepeixoto3384 2 роки тому +1

      i think that's 2 videos in one; the second part shows it wired to Prioritize the Public Utility Power, and the Solar Power,the secondary power;
      The first part was the inverse, the Solar Power was the Primary power,; this is the way i have it in my house now.

    • @vet137
      @vet137 Рік тому

      @@josepeixoto3384 Cool to know I will hookup my Solar Convertor to the Primary now

  • @Zerpersande
    @Zerpersande 2 роки тому

    Next to useless for actually installing one, huh?