One tip,don’t spray degreaser into the vents at the base of the windshield...that feeds air into the passenger compartment (and the cabin filter)there is a special spray for that,made by Fabrese and Lysol ...
glad I found you. The SX4 is the most underestimated car. Question: *At :55* ... what is the steel tongue sticking up with a hole in it, in the front center of engine bay?
I've never protected any electrical components when cleaning a car with a pressure washer either, just don't use a very pointed jet and stay far enough away not to cause damage. I have a friend who specifically power washes his engine bay with the car running. He does this so that if the car stops running due to any electrical components being damaged he will know right away where the damaged component is. Since he told me this I've done the same with my cars and with or without this method have never had an issue.
How did u not flood the engine jet washing it like that or is that a diesel engine cause I would never jet wash my sx4 turbos engine like that like and as someone said did ya protect the electrical work
Engine's should never be washed, the dust over oil leaks Protects And removing lubrication from seals will give more future problems. Something I learned at the University as sechanical engineer
I was thinking the same. So that is why I leave the car running while cleaning the engine. I have done it this way for a long time and never had a problem.
Being curved, it's the strangest prop I've seen in 55yrs of driving, but it works OK. The plastic retainer on my 08 broke almost immediately, and I Never bothered to replace it.+
hey man, do you have any recommendations for hood struts/lift? my hood support rod broke. I'm looking at some models in Canadian tire but I don't know if they'll work or fit. thanks.
+quiambaomc Funny but I just had to fix mine! I have ordered the white plastic piece that holds the rod to the body. And had to straighten the rod itself. I have checked prices and the plastic piece is around 5$ and 45$ for a new rod from the dealer. Just get a new original one.
volvosweden there's no Suzuki dealer here in Vancouver that sells support rod for my 2010 sx4 do you one that ships here? can you share the website. please and thanks.
+quiambaomc There should be one. Mitsubishi in Winnipeg provides parts and service for Suzuki. Call Waverly Mitsubishi and ask who supports Suzuki in Vancouver.
Loved this video, i have a 2007 1.5 RHD SX4, so all your videos have been helpful even though our cars are slightly different. how come you washed down the battery and brain box? Is that advisable? don't I need to cover the electric stuff in the car before washing? need to know the risks before I go ahead and try this myself
klo dari pengalaman siy harusnya aki di lepas dulu mas, terus saat pake water pressure klo bisa jangan kena alternator sama perangkat ECU, atau ditutup kresek bagian bagian yang sensitif air. Klo pengalaman saya siy cara di video ini kurang tepat mas.
don't do it on dodge Chrysler Jeep and ram cars it will cause the coils on the spark plugs to go bad best thing to use is car carpet cleaner and a air hose detailed cars for nine years
So if an oil leak happens what is the right thing to do? I’ve used the gunk spray (just a small amount) with just a spray bottle of water and whipped it clean all around . Let it dry out for about 6 hours but when driven after that it was a little Smokey , would this be from the bottom or some that is burning off of that was left behind?
beautiful car. i got the same one in black 😍.
What year is yours? And how many miles you got on it
The brushing was perfectly enough. I wouldn’t even imagine to put water in so sensitive parts
One tip,don’t spray degreaser into the vents at the base of the windshield...that feeds air into the passenger compartment (and the cabin filter)there is a special spray for that,made by Fabrese and Lysol ...
just buy new filters
Fantastic! Very nice job on the clean up and the video! I wonder what type of pressure washer tip/ pressure? I can't wait to try this.
will have to do this , mine is so bad , its been oiled all out since 2008 without ever being washed looks like , nasty! GG !
What's the track and artist name for the music that starts at 0:23? Thanks, nice vid
08/9 22 New MAF Assembly recently fitted ?
glad I found you. The SX4 is the most underestimated car. Question: *At :55* ... what is the steel tongue sticking up with a hole in it, in the front center of engine bay?
it's a engine hook, so you can pull it off easier with a hoist
@@alexandreboutin1476 Thank you!
Awesome Job!
Did you protect any electrical components in the engine bay from getting wet?
None were covered.
I've never protected any electrical components when cleaning a car with a pressure washer either, just don't use a very pointed jet and stay far enough away not to cause damage.
I have a friend who specifically power washes his engine bay with the car running. He does this so that if the car stops running due to any electrical components being damaged he will know right away where the damaged component is. Since he told me this I've done the same with my cars and with or without this method have never had an issue.
How did u not flood the engine jet washing it like that or is that a diesel engine cause I would never jet wash my sx4 turbos engine like that like and as someone said did ya protect the electrical work
excelent video...congratulation..!!!
Engine's should never be washed, the dust over oil leaks Protects And removing lubrication from seals will give more future problems.
Something I learned at the University as sechanical engineer
I hope this won’t damage any parts or cells... is it safe to spray on the battery ?
No damage. No problems later.
Is it allright not to cover electricity part when you rinse the engine bay? Or do you find trouble after the wash ?
Play it safe, cover the electrical parts.
Is this 2000cc?I see you have hydraulic wheel instead of electric.Or is it diesel 1.9?
+ΜΠΑΜΠΗΣ ΡΟΥΧΛΑΣ 2.5 Petrol 5cylinder
But how?From Vitara?
+ΜΠΑΜΠΗΣ ΡΟΥΧΛΑΣ My bad its 2.0 Petrol
A, you're dads . OK.Have a nice weekend.
This is not safe.Maybe lead to electronic or electrical failure.
Are you sure it is safe to do it with electric components?
I want the same but I'm afraid.
I was thinking the same. So that is why I leave the car running while cleaning the engine. I have done it this way for a long time and never had a problem.
@@KIKE8743 Thank you for advice.
Can you show me how your Hood prop Rod is attached? I just bought me a 2007 SX4 and it was missing so I am replacing the parts for the hood prop.
+Summers Woodworking I've replaced the plastic part that holds the rod to the body. I got it from Suzuki dealer.
volvosweden me too but cannot figure where to install it. Mine was missing when I purchased this vehicle
+Summers Woodworking I can email you a picture. My email is yuriyermilov@gmail.com
+Summers Woodworking Got it. I will delete your comment with email address.
Being curved, it's the strangest prop I've seen in 55yrs of driving, but it works OK. The plastic retainer on my 08 broke almost immediately, and I Never bothered to replace it.+
How to change variateur arbre a cam ?
To avoid problems, I would recommend covering electrical components, do not use pressure washer and run the engine while rinsing.
you didnt cover the alternator? or any wires?
+Joshua Cuñada Nope. The alternator is way down below the power steering pump and is hard to reach.
I have the same car in silver colour😂👍
hey man, do you have any recommendations for hood struts/lift? my hood support rod broke. I'm looking at some models in Canadian tire but I don't know if they'll work or fit. thanks.
+quiambaomc Funny but I just had to fix mine! I have ordered the white plastic piece that holds the rod to the body. And had to straighten the rod itself.
I have checked prices and the plastic piece is around 5$ and 45$ for a new rod from the dealer. Just get a new original one.
volvosweden there's no Suzuki dealer here in Vancouver that sells support rod for my 2010 sx4 do you one that ships here? can you share the website. please and thanks.
+quiambaomc There should be one. Mitsubishi in Winnipeg provides parts and service for Suzuki. Call Waverly Mitsubishi and ask who supports Suzuki in Vancouver.
Loved this video, i have a 2007 1.5 RHD SX4, so all your videos have been helpful even though our cars are slightly different. how come you washed down the battery and brain box? Is that advisable? don't I need to cover the electric stuff in the car before washing? need to know the risks before I go ahead and try this myself
+Joel V. Le Gendre Cover that. To reduce the risk. Its not advisable to wash the engine at all.
perfect 👍👍👍👍👍
very helpfull.i like it
视频中所使用的清洗剂品牌是什么呢 我想知道 谢谢
i did this and when I turned it up I had a miss fire. To much water on some electric components. next time ill let the car idle cor 24 hours
yeah man im not really surprised by that. the guy in the video didn't even disconnect the battery which might have been a good idea
Exactly I said the same thing, I would next just spray water on my battery like that not a good idea
looks nice
how is Suzuki 2010 sx4 seden sport manual gear, ? i am about to buy one
我看了视频 找了下 似乎是
GUNK钢克FEB1 不知道对不对. 另外 后面喷的那个东西 是什么 似乎是美光 Meguiars 的某个产品
Sx4 car 2014 passing, kitame Leni chahia
The engine kept failing the last time I washed my SX4.
Тоже нужно керхером пройтись
the music in the video is lit
Indeed
Emang g pa2 ya cuci mesin kaya gitu, secara kan banyak socket socket...???
klo dari pengalaman siy harusnya aki di lepas dulu mas, terus saat pake water pressure klo bisa jangan kena alternator sama perangkat ECU, atau ditutup kresek bagian bagian yang sensitif air. Klo pengalaman saya siy cara di video ini kurang tepat mas.
Çorumlu işi yıkama olmuş 🤪😂
Next time try to use music....
don't do it on dodge Chrysler Jeep and ram cars it will cause the coils on the spark plugs to go bad best thing to use is car carpet cleaner and a air hose detailed cars for nine years
Wow so clean!! Awesome job. Now the Earth is more polluted with the hazardous chemicals you drained down the sewer. Good luck fishies of the world.
Please don't give the rediculous "law-makers'' in my state a reason to outlaw the rinsing of a car's engine bay. ;)
@@gabepettinicchio7454 Disgusting comment.
@@djb6496 Nut-case!!!
++ Plus.
i never wash my motor engine,dont need to
Exactly this is not smart to do, not sure if the driver of car knew not to spray water on battery like that 🤷🏼♀️
sx4
Please dont do this to your car. Especially washing with water your engine.
So if an oil leak happens what is the right thing to do? I’ve used the gunk spray (just a small amount) with just a spray bottle of water and whipped it clean all around . Let it dry out for about 6 hours but when driven after that it was a little Smokey , would this be from the bottom or some that is burning off of that was left behind?