Install Proxmox in VirtualBox

Поділитися
Вставка
  • Опубліковано 29 жов 2024
  • Proxmox ISO Download: www.proxmox.co...

КОМЕНТАРІ • 79

  • @MandeepSingh-ji8ze
    @MandeepSingh-ji8ze 7 місяців тому +1

    I had been looking for an example to run and install it on laptop on hyper v from ages and at last I found it 💃. Thank you very much!

  • @danielgx83
    @danielgx83 10 місяців тому +2

    thanks , couldn't use the feature nest for amd , probably because of my low hardware . but still good to know how :)

  •  6 місяців тому

    Exactly what I was looking for! Thank you! :)

  • @razmus9708
    @razmus9708 11 місяців тому

    Great presentation!! Just what I was looking for.
    I have one question. Why do you remove the ISO at 9:00? I always leave it there when I am using ISO but maybe I should be removing it?

    • @tatogtech6748
      @tatogtech6748  11 місяців тому

      I do this out of habit. Depending on what your installing, it can keep trying to boot from the disk instead of the virtual drive.

  • @debnathmriganka2010
    @debnathmriganka2010 День тому

    Sir, I am very new on linux system, for learning i want to install proxmox onvirtual box and then want to install container lxc but facing some issue of networking, Please can you help me.

  • @juicy_zayy
    @juicy_zayy 7 місяців тому +2

    its showing multiple network adapters, I can figure which one to use, there is like 8?

    • @tatogtech6748
      @tatogtech6748  7 місяців тому

      You'll want to select the primary network adapter you are using to connect to the internet. This should be the one it defaults to.

  • @michaelwarren6902
    @michaelwarren6902 Рік тому +5

    What if enable nested is grayed out using Linux?

    • @rodrigoferrero6029
      @rodrigoferrero6029 8 місяців тому

      In your linux console do: VBoxManage modifyvm --nested-hw-virt on

  • @smichaelyt
    @smichaelyt 5 місяців тому +2

    Hello, I installed Linux in Proxmox but Linux can't access the internet, how do I configure it?

  • @THEWATCHER76
    @THEWATCHER76 11 місяців тому +2

    HELLO GOOD EVENING... I HAVE AN ISSUE MY LAPTOP IS AMD BUT AMD-V CAN'T BE SELECTED OR TURNNED ON CAN'T EVEN CHECK ON IT WHAT MUST I DO IN THIS CASE OR HOW CAN I GET THAT TO RUN ?? HELP PLEASE.... 🙏🏻

    • @tatogtech6748
      @tatogtech6748  11 місяців тому

      What type of Laptop are you using?

  • @Virtualbox_Tutorials
    @Virtualbox_Tutorials Рік тому +1

    Great video ,clear instructions!

  • @jacobgerard6291
    @jacobgerard6291 6 місяців тому +2

    When i type in the link into the browser, my computer blue screens. How can I fix this?

    • @tatogtech6748
      @tatogtech6748  6 місяців тому

      How many resources did you allocate to your VM?

  • @GloryBoyBulut
    @GloryBoyBulut Рік тому +1

    Holy moly!! this really has helped me man!1!! Thank you very much

  • @Daosasone559
    @Daosasone559 24 дні тому

    im running vb on Macos m1 beta version. I'm getting shell command line. any suggestions on this fix. it doesn't have the enable nested option either

    • @tatogtech6748
      @tatogtech6748  17 днів тому

      Double check you downloaded the correct ISO. That most commonly happens when you download the x86 version and not the ARM version.

    • @Daosasone559
      @Daosasone559 13 днів тому

      @@tatogtech6748. I will double check. But I believe I have the correct iso. Thanks for the reply

  • @naomibolo1977
    @naomibolo1977 7 місяців тому

    Hi, thanks for the tutorial, which virtualbox version was used on the video ?please bc i downloaded the latest version virtualbox 7.0.14 and it may have caused errors when i try to run the OS on a virtual machine

    • @tatogtech6748
      @tatogtech6748  7 місяців тому +1

      I believe it was 6.1.42. That version is no longer supported. I would recommend trying an older version in 7.0.X. You can get those here: www.virtualbox.org/wiki/Download_Old_Builds_7_0

  • @mdazmayeenfaiaz8545
    @mdazmayeenfaiaz8545 7 місяців тому +1

    My Ip address on the browser does not load. What do I do?

    • @tatogtech6748
      @tatogtech6748  7 місяців тому

      What do you mean your IP on the browser does not load?

    • @NOIMM27
      @NOIMM27 6 місяців тому

      ​@@tatogtech6748 I think he is referring to the GUI/ up address that opens the web browser for proxmox

    • @mdazmayeenfaiaz8545
      @mdazmayeenfaiaz8545 6 місяців тому +1

      I typed the address from proxmox on my browser, but it doesn't load

    • @tatogtech6748
      @tatogtech6748  6 місяців тому

      @@mdazmayeenfaiaz8545 Is it giving you a warning or is it telling you it cannot be found?

    • @mdazmayeenfaiaz8545
      @mdazmayeenfaiaz8545 6 місяців тому

      @@tatogtech6748 it cannot be found

  • @hemsandy5236
    @hemsandy5236 Рік тому +3

    I install proxmox successfully, but cant access that IP, it seem proxmox no internet connect

    • @tatogtech6748
      @tatogtech6748  Рік тому +2

      Hi! Did you remember to change the network type in the settings from NAT to Bridged?

    • @DollarBinJunkie
      @DollarBinJunkie Рік тому +2

      Promox is awesome! Great info

    • @tatogtech6748
      @tatogtech6748  Рік тому +2

      @@DollarBinJunkie Agree 100%. Thanks for watching and the comment!

  • @LeoAlvesJF
    @LeoAlvesJF 11 місяців тому +1

    Your video help me to install .... Thank you very much !!!

  • @MerwinPinto-vy8nc
    @MerwinPinto-vy8nc 6 місяців тому

    wonderful there was an issue at 1st becoz i downloaded latest proxmox my system always crashed after entering it. but after installing older version it went great !!

    • @tatogtech6748
      @tatogtech6748  6 місяців тому

      Glad things are working for you!

  • @xilliman
    @xilliman 3 місяці тому

    Thanks for the video. I currently struggle with the internet connection of my installed containers. Proxmox has a connection but the containers don’t.
    Would love a video about that too :)

    • @coolkidzzz
      @coolkidzzz 2 місяці тому

      I have the same problem. Did you ever fix it?

    • @coolkidzzz
      @coolkidzzz 2 місяці тому +1

      I just fixed it actually! Try going to the settings of your Proxmox Virtualbox, then go to network and then advanced, promiscuous mode: allow all

    • @xilliman
      @xilliman 2 місяці тому

      @@coolkidzzz I am using virt manager on Linux because virtualbox was not able to bridge it correctly :(
      It was just for learning purposes because I plan to build my own physical thinclient 😀

    • @muhammadrizkyr
      @muhammadrizkyr Місяць тому

      ​@@coolkidzzzthat network Nat or bridge ?

    • @coolkidzzz
      @coolkidzzz Місяць тому

      @@muhammadrizkyr I used bridged

  • @mariamarkelova8573
    @mariamarkelova8573 10 місяців тому +1

    thank u so much wish u all the best!

  • @daffaharilesmana39
    @daffaharilesmana39 7 місяців тому

    excuse me sir i want to ask, is it possible if we install the proxmox with nat network not bridge and how to connect with the host if it's possible?

    • @tatogtech6748
      @tatogtech6748  7 місяців тому

      You should be able to, but you would have to do some configuration of the virtual network adapter to allow it to be accessed from the host.

  • @khoerulanwar1955
    @khoerulanwar1955 3 місяці тому

    i already changed the network to bridged, but when trying to open the console via host browser cannot be opened, any idea?

    • @tatogtech6748
      @tatogtech6748  3 місяці тому

      Check the IP address on the local network.

  • @SMastermind234
    @SMastermind234 6 місяців тому

    Not able to access the ip after picking bridge network , what can cause this?
    I tried your method from 2 PC's

    • @SMastermind234
      @SMastermind234 6 місяців тому

      Solved the issue by dhclient -v vmbr0 command , the Virtual box didn't pick client IP.
      if you are using oracle it might have to be done manually and setup static ip.

  • @En3ka_
    @En3ka_ 7 місяців тому

    NEED HELP, are you using other Vbox or host ? you need to put ip stactic but i lose internet, how is possible to enter whitout losing internet ?

    • @tatogtech6748
      @tatogtech6748  7 місяців тому +1

      I was using a bridged adapter and that puts the VM on my home network. If you want to assign Proxmox a static IP, you will need to do that from the device that manages your DHCP. This is usually your home router. If you try and manually assign it an IP in the host or Proxmox, your local network will not recognize it.

  • @rohithshetty5657
    @rohithshetty5657 3 дні тому

    Hello i am not able to access that IP on browser, getting site cant be reached

    • @tatogtech6748
      @tatogtech6748  3 дні тому

      Check your IP address and make sure you are putting :8006 after the IP address.

  • @khairilaslam5887
    @khairilaslam5887 2 місяці тому

    thanks for the video.

  • @byronjustiniano8778
    @byronjustiniano8778 Рік тому +1

    Thanks, you earned my like
    That help me a lot :D

    • @tatogtech6748
      @tatogtech6748  Рік тому

      You're welcome! Thanks for the view and comment!

  • @nc3565
    @nc3565 5 місяців тому

    and what about to choose just debian x64?

    • @tatogtech6748
      @tatogtech6748  5 місяців тому

      You would only check that if you are running a 32-bit OS.

  • @syyynksta
    @syyynksta 5 місяців тому

    thank you very much!!!

  • @amiriahmad9997
    @amiriahmad9997 8 місяців тому

    Thank you very much Habibi

  • @carlcustodio2279
    @carlcustodio2279 Рік тому +1

    Thanks!

  • @mariom.5748
    @mariom.5748 Рік тому +1

    Thanks

    • @tatogtech6748
      @tatogtech6748  Рік тому

      You're welcome! Thank you for watching and commenting!

  • @SubZeroCraftCH
    @SubZeroCraftCH 4 місяці тому

    i cant open the web ...

  • @DmitryRomanov1
    @DmitryRomanov1 9 місяців тому

    Thanks!