I have the himiway cruiser and it will go 30-32 reliably and slower on hills. That speed is fine if you have a decent bike infrastructure and people acually follow the speed limit in the city but realistically the pro can be rides in the street and not impead traffic. 30mph speed limit means 35-40 is needed and that pro will still have some extra to give
I had to stop watching 4 minutes in because your audio was so rough to listen to. Maybe subtitles next time in the future when there's a ton of wind noise?
@@StuartGrandhonestly for me it was the volume of the music overlay compared to your audio; I couldn't turn the volume up to make out what you were saying without blasting the music over you 😕
Huge fan of the Non Pro roadrunner due to its size and weight. To the untrained eye, it looks like the small jetson ebike that everyone gets from Costco.
Agreed as well I’ve been begging vorro motors to make a Pro Mini. Imagine dual 1000w motors at like 52v with more torque off the line and rear suspension.
Hi can u please tell me how fast each mode goes on 500w not both motors . 2nd how hard is it to change the wheel if you get a flat tire . I’m thinking of getting this one because the pro is 115 pounds 😮😮
Single motor mode 1 reaches about 20mph. Mode 2 is around 24. Mode 3 is around 28. I wish mode 1 was 15 mph, mode 2 20mph and mode 3 at 28 but oh well. These wheels are not too hard to change but not easy. I used a hair dryer to heat up the tires & make them more flexible and that helped a lot to get the tire off the rim. I also have tire slime in mine to help prevent flats. Yeah i know what you mean, 115 lbs is almost as much weight as a surron.
In short, you have to deflate the tube, take it out. Re insirt the tube and make sure it is centered all the way around. then inflate again. You should check out this facebook forum for roadrunner users and mods here. You can also find other answers to other problems with the RR here: facebook.com/groups/702615157371225/permalink/829307831368623/
People also add soapy water to the outside of the tubes to help it line up right. Here's a youtube video explaining ua-cam.com/video/H9HPaD-Sw8g/v-deo.html
Yeah my mirror set up is fine. I have them below my handlebars only for my youtube videos. When they were above the stem, they would block too much of the camera view. For the stem, any standard mtb stem will do. I believe voro has their own upgraded stem on their site but it might be sold out. I have not decided on a stem for myself yet. You can see what stems people used on the roadrunner users & mods forum on facebook here. facebook.com/groups/702615157371225
I actually do, now that you mention it. I noticed after I replaced my brakes and rotors. When the brakes are fully engaged and I try to move forward, there's some slight give that I think is coming from the front forks/shocks
@Stuart Grand See if you notice it during normal breaking. I get like a pulsing . Especially if the shock is set to the max firmness. I tried setting shock to softest, and it helps a bit.
Did you check to see if you have front tire wobble? Its a very common problem with the RR. Set the bike on a stand and get the wheels spinning to see if the tires are aligned properly. I had this problem on my RR when I got it ua-cam.com/video/Sp2YfKFUh4A/v-deo.html
@Stuart Grand Yeah, I know about the wobble issue. It's more like a flex like you described. If you stand over the fork while applying brake. Move handlbar forward and back and see if you notice flexing. Especially when dialed into max.
![This 50 MPH "scooter" is terrifying. [Roadrunner Pro review]](http://i.ytimg.com/vi/uJnq-8DDMO4/mqdefault.jpg)
Sorry for the wind & traffic noise! Make sure to press "CC" for captions.
I got the Pro... Youre right about cops... I've gone 40-50mph NEXT to them and I've said hi.. lol. They gave me a nod.
I have the himiway cruiser and it will go 30-32 reliably and slower on hills. That speed is fine if you have a decent bike infrastructure and people acually follow the speed limit in the city but realistically the pro can be rides in the street and not impead traffic. 30mph speed limit means 35-40 is needed and that pro will still have some extra to give
👎👎non seul ment il est cher et en plus beaucoup de défaut !!
I had to stop watching 4 minutes in because your audio was so rough to listen to. Maybe subtitles next time in the future when there's a ton of wind noise?
Understandable. Wind plus traffic noise was louder than expected. Might have to invest in a mic
@@StuartGrandyes invest in a better mic 😅 .. but nice content !
@@StuartGrandhonestly for me it was the volume of the music overlay compared to your audio; I couldn't turn the volume up to make out what you were saying without blasting the music over you 😕
Huge fan of the Non Pro roadrunner due to its size and weight. To the untrained eye, it looks like the small jetson ebike that everyone gets from Costco.
Agreed! I still love my roadrunner after 700 miles
Agreed as well I’ve been begging vorro motors to make a Pro Mini. Imagine dual 1000w motors at like 52v with more torque off the line and rear suspension.
Yes 100%! Keeping it under 100 lbs with rear suspension and more power would be incredible.
@@StuartGrand 😎🙏🏾🙏🏾
Hi can u please tell me how fast each mode goes on 500w not both motors . 2nd how hard is it to change the wheel if you get a flat tire . I’m thinking of getting this one because the pro is 115 pounds 😮😮
Single motor mode 1 reaches about 20mph. Mode 2 is around 24. Mode 3 is around 28.
I wish mode 1 was 15 mph, mode 2 20mph and mode 3 at 28 but oh well.
These wheels are not too hard to change but not easy. I used a hair dryer to heat up the tires & make them more flexible and that helped a lot to get the tire off the rim. I also have tire slime in mine to help prevent flats.
Yeah i know what you mean, 115 lbs is almost as much weight as a surron.
Cool video Bro. I have the RoadRunner/Lectric 2.0/Emove Cruiser. Here in Chicago the weather is gross. Can’t wait to back out there. Enjoy!
I appreciate that- Thanks for watching!
Just got my roadrunner and the front wheel wobbles a lot .How did you get rid of the wobbbling.
In short, you have to deflate the tube, take it out. Re insirt the tube and make sure it is centered all the way around. then inflate again. You should check out this facebook forum for roadrunner users and mods here. You can also find other answers to other problems with the RR here: facebook.com/groups/702615157371225/permalink/829307831368623/
People also add soapy water to the outside of the tubes to help it line up right. Here's a youtube video explaining ua-cam.com/video/H9HPaD-Sw8g/v-deo.html
Thank you. You are a lifesaver.
No problem! Thanks for watching
Do you like your mirror set up? What is the reccomended stem If I want to keep the folding handlebars?
Yeah my mirror set up is fine. I have them below my handlebars only for my youtube videos. When they were above the stem, they would block too much of the camera view.
For the stem, any standard mtb stem will do. I believe voro has their own upgraded stem on their site but it might be sold out. I have not decided on a stem for myself yet.
You can see what stems people used on the roadrunner users & mods forum on facebook here.
facebook.com/groups/702615157371225
Do you notice any flexing in the front shock ? Besides the normal downward travel.
I actually do, now that you mention it. I noticed after I replaced my brakes and rotors. When the brakes are fully engaged and I try to move forward, there's some slight give that I think is coming from the front forks/shocks
@Stuart Grand See if you notice it during normal breaking. I get like a pulsing . Especially if the shock is set to the max firmness. I tried setting shock to softest, and it helps a bit.
Did you check to see if you have front tire wobble? Its a very common problem with the RR. Set the bike on a stand and get the wheels spinning to see if the tires are aligned properly. I had this problem on my RR when I got it ua-cam.com/video/Sp2YfKFUh4A/v-deo.html
@Stuart Grand Yeah, I know about the wobble issue. It's more like a flex like you described. If you stand over the fork while applying brake. Move handlbar forward and back and see if you notice flexing. Especially when dialed into max.