How to install wot box in 96-04 cobra
Вставка
- Опубліковано 8 лют 2025
- To all those wanting to install 2 step and no lift shift (a.k.a wot box)on their 96-04 cobra we show you how to install it and be on your way, have fun and most of all be safe.
Here is the link to pick one up similar to this one.
lmr.com/item/N...
Disclaimer:
Due to factors beyond the control of Stang Domination, we cannot guarantee against improper use or unauthorized modifications of this information. Stang Domination assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Stang Domination recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Stang Domination, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Stang Domination.
![How to Test for a Stuck Open Fuel Pressure Regulator! [A ScannerDanner Premium Lecture]](http://i.ytimg.com/vi/ZG8rMJwILxA/mqdefault.jpg)
![How to Test for a Stuck Open Fuel Pressure Regulator! [A ScannerDanner Premium Lecture]](/img/tr.png)
Finally a video that shows how to install a WOT box. After watching this, it seems pretty straight forward. I watched a few other guys try and make an install vid and it seemed like they overcomplicate the process. Thanks for this.
How do you guys like it so far? Any major difference in feel of the car when shifting?
Thank you man. We will definitely have a lot more vids on the sn and termi in the near future. You can definitely feel the shifts are faster with the no lift. Launch control helps just need to have right tire set up to to bring down spinning even more
I wish I found this last night! Awesome vid very straight forward. Thanks guys.🤙🏼
OH/PENN Moto *OBP* always find what you need after the fact ha. Thank you too.
@@StangDomination
Q
We
Good video. I'll be installing this on my cobra soon
Rick Wilkinson appreciate it
I hate electrical and you guy made this look easy
Rick Wilkinson yea it can be a headache from time to time. glad it helped you out.
I installed mine on a 2008 cobaltss turbo n it spits flames 🔥 lol 😆 an my launches are on point and my no lift shifts are like butter
Do you need a computer? Very very detailed video thank you!
after having this in the car for a few years is this worth it?
That’s cool! I always
Wanted a 2 step in my car
Derpy Derp appreciate you taking the time to stop by our channel. Hope it helps out on trying to install one in your car in the future.
Stang Domination I appreciate the videos cool to see other Ford mustang guys doing good work.
Can’t stand Chevy assholes. I don’t know what it is but I do not get along with Chevy dudes. Cocky jackasses.
@@derpyy4577 ha its the ultimate car rivalry.
What does 2 step mean?
King Kev 2 step is launch control. You set a rpm you want the car to be at when you take off from a stop
Any idea why it would cause fuel to end up in my intake ?
Can you still install one of you have a cable trottle not wire
Thanks bro doing mine tomorrow!!!
You’re welcome. Glad it helped you
You think I can put a wot box in my 3.9l mustang
Just finished installing mine 🔥🤝 but my computer died before I could get er’ completely setup.
This thing is a lot of fun once you get to use it. It just died out of no where?
Yeahh the battery was low but now I gotta work out some kinks, may have wired TPS the wrong way.
@@bankbrot.e.0.n927 that sucks. you change out the alt on that thing?
Negative. I need to though fr lol. So you do any dig racing?
since you just used connectors did you still get good connection? or did you have to go back and fix it?
The 3 splice Connectors we used work fine. They still had good connection on this car. Before you clamp the connector down just make sure the wires are sitting where they need to be so you get a good bite when you go to clamp it down
How did the connection with the splice pieces inside the cabin hold up?
Michael Taylor they’re still good.
Tune is not required is it ? Simple installation?
EAbraham.R no tune required. Just download their program to set the rpm limiter. This vid should make it a simple install
Would this be the same for a 2003 gt?
^^?
Pretty sure it would be the same harness. I’d check the PIN number on all the harnesses and see if it’s the same color wire.
Do you have to plug it into the laptop to get the 2 step too work? I just installed this and everything works but the 2 step. Do you have to set up the two step in order for it to work? Also i re spliced the yellow wire like 3 times.
Yes, that’s where you make adjustments
What’s then little blue clips you put on the wire called ?
The Tap splice connectors
@@StangDomination oh I forgot but I got it installed on my stock gt 04 only got a performance intake does it mess up the engine or anything ?
Hey man installed as the video and instructions on lmr and when I turn the box on it blinks instead of staying still
Haated 97 what year are you installing on? The sn95 have different colors for the PIN number than the new edge
Stang Domination do you have Instagram it will be easier
Haated 97 yes we do. It’s stang domination
Cool 👍🏽
is this the same for 96-04 gt?
Not to sure on that. Would have to check the pins but also the wotbox website might have a diagram or instructions on it
Was it worth it ?
It takes some getting use to but I think it was definitely
@@StangDomination I think I will buy this next week for my vw
Is the install the same for a 97 Cobra?
Yes. The ecu PIN number is the same but the wire wil be a different color
@@StangDomination Thanks for the quick reply! Awesome video, straight forward no bs
Appreciate that thank you
Can u do this on v6
Haha Yea but check directions
04
Just did this and the blue light didn't even turn on
It was on the right green?
@@StangDomination this also is happening to me it won't power on
Sucks thier is no how to videos for fox bodys
Most definitely in the future we’ll have one up. Got one waiting to be installed
@@StangDomination where are you located my brother has a 93 cobra and wants get on installed