Hello Gerard! I was wondering where I could get my hands on this case, It seems that it is no longer in stock on aliexpress, just the bigger k40 version. Please could you send me a link to where I can buy it. Thanks
Audibly acceptable. What is somewhat noisy is the cpu fan as it ramps up like a jet engine during renders. I also, I set the cpu fan on a silent profile in idle mode for better accoustics.
@@gerardcarpizo I've done noctua fan swap in for the PSU and it definitely helps decrease noise. Just hope the PSU temps dont suffer as it's a skinnier fan
Hi how is the flex PSU holding up? I'm thinking to use the same PSU from Ali express the brand is Delta if I'm not wrong. But a bit worried it will be faulty in future
Thanks for making such an AMAZING video!!!
The K39 is such an incredible case. Are you going to do the Noctua mod for your Flex PSU?
Hi, yes as the PSU can be very load esp when streaming or recording content. 😄
Hello Gerard! I was wondering where I could get my hands on this case, It seems that it is no longer in stock on aliexpress, just the bigger k40 version. Please could you send me a link to where I can buy it. Thanks
Nice small build. I'm curious, how noisy is the power supply? Tolerable or it's better off wearing a headset?
Audibly acceptable. What is somewhat noisy is the cpu fan as it ramps up like a jet engine during renders. I also, I set the cpu fan on a silent profile in idle mode for better accoustics.
Not tolerable. When im lying at bed scrolling phone and hear jet engine on my side, makes me want to rip that fan out
@@danialrafiqi9346 You can do the mod Optimum Tech did to have a quieter system. ua-cam.com/video/-7x1LI5kOS4/v-deo.html
@@gerardcarpizo I've done noctua fan swap in for the PSU and it definitely helps decrease noise. Just hope the PSU temps dont suffer as it's a skinnier fan
@@LiminalSpaceMan192 that's a mod I'd would like to do in the future. Noctua fans are very reliable and temps would be fine I guess if a pwm is used
Hi, did the riser cable come with the case? and is it pci -e 3.0 or 4.0? thanks
The riser cable is paid separately and its pci-e 3.0
What angle is the GPU-end of the PCIE cable? Is that 180 degrees?
Is there another PSU that we can use, the link you gave for the PSU in the comments has been taken down?
Hi how is the flex PSU holding up? I'm thinking to use the same PSU from Ali express the brand is Delta if I'm not wrong. But a bit worried it will be faulty in future
Still currently using it and no problem so far. 👍
It can handle sketch up and auto cad??
Based on the syatem system requirements of autocad and sketch up, yes it can but dont expect high end performance.
Can only put one 2.5 hard disk ? Is this correct ?
You can fit two 2.5 hdd, one on each side.
hi friend, I have exactly the same video card 1050ti kfa2 it has a length of 196mm, did you cut it ?? how long did you end up with??
The pcb is exactly 180mm, yes I sanded down the plastic shroud to reduce the lenght of the gpu.
Can it fit wraith stealth cooler
Which VGA size can fit this?
Dependa on the Mini ITX motherboard to be used, Id say standard I/O size is compatible along with the VGA size.
did the screws come with the case or with something else?
The screws came with the case.
anong specs ng riser cable?
Lower gen, yan yung binebenta kasama nung case.
what brand is the PSU ?
Bought it from aliexpress: a.aliexpress.com/_mOlNK0b
2666mhz ram?
Its just 2600 mhz.
@@gerardcarpizo oh.. i see maybe you should do an upgrade. a 1660 and a 3200mhz ram is that build is still alive.
@@yeahimnogood8866 yes, 1660 would be awesome tho I think 3000Mhz would be alright.
@@gerardcarpizo okay then, hoping to see the upgrade. keep safe
Thanks, keep safe too.
so how much did it cost??
Parts were bought pre-covid and some were bought on sale--its around $900.