Brian, your way of showing how it should be done just watching the video gives me great confidence I can only imagine how good it would be having you right there using zoom good times ahead thanks for your time.
Thanks for the video. I want to reprogram the "zero miles left" gauge on my 2016 Honda Civic. Because it comes way too early, two gallons are still in the gas tank. Is it possible to chance that?
Is the J box necessary only to Re-program the PCM/ECM? This is something I will ever do or need to do. All I need the software for is to read codes and run actuators such as the EPB to replace the rear pads. I saw one video that showed that they had to clear or erase to start a diagnostics which looked dangerous maybe that was to clear the buffer and not the PCM/ECM? Without the J box is there a way to screw up the Honda PCM/ECM? Will this software work on 2020 through 2022 Honda Accord Hybrid Touring models?
Great information Brian. I have a question. Can you write a vin number on an older honda's like 2002 with the j2534 ? I have the same cardaq 3 plus and i do programming, but not sure for older models if i can write the vin number if the customer got a used pcm from the junkyard. Please let me know and thanks for the great videos. God bless and keep posting wonderful videos.
If the vin function is available ( some older ones ,not sure what year, dont even store the vin. ) using ihds it is usually pretty simple when the vehicle is identified.
hey did you get yourself figured out here. Last week i unstalled a used pcm in a 06 civic that a injector went bad on and wrecked the pcm wrote it with a autel scan tool worked well for that situation was a maxisys 908
What is the latest and more recent OEM factory scan tool & professional software introduced by honda and it's repair dealers uses exclusively ?many thanks in advance
Great video. I want to scan my 2014 Accord since the EPS light came on. I will rent the HDS from Honda for one day but can I use any j2534? Or should it be a special brand?
Hello friend, I have a Honda Odyssey from 2009-2010, I get an error 86-01: cannon relation error, and I erased the code with scanner launch but later I got another message and it says like this: Caution, the ABS control unit It interrupts the communication at more than 50 km/h (30 MPH). Could you please help me how to solve this problem.
Can you use this program to re-write the VIN number on the ECU? I have to get my ecu replaced but i am reading online that the replacement ECU needs to be programmed to have my cars VIN. I have a 2004 honda crv
Brain do you have any training videos on using IHDS ot techstream for immbolizer reprogram(REPLACEMENT) using LSID. OR CHANGE IN ECU needs immbolizer reset code ...
@@BrianMann216 I got through today thanks, the customer was in a rear accident and the radio transmitter located in the right rear fender had one of the connector out . Probably disconnected it to repair the bounce . Connected it and solved the issue.
I'm looking at it and I see Honda's name all over it, but in so many ways it looks so much like Fords IDS. Brian; does the HDS have a Ford scan tool feel to it as you use it?
no it is a bit different to me , although I think either Textron or Raytheon (not sure) of parent company but Teradyne designed them. Feel free to chime in if you know!. I will tell you that Ford, Honda, Mazda, Jag / Landrover will not work on the same windows computer without bootable partition to the best of my knowledge as the creators of these software use the same system resources....
@@BrianMann216 What I was getting at was the general aesthetic sense of the two systems. I saw them as eerily similar, but not the same. My meaningful hands on time with factory scan tools is limited to IDS and WiTECH2. I couldn't tell you who designed any of them either. I'm just excited when I can figure out how to make any of them work. I have seen Mazda's IDS and it was identical to Ford's IDS right up to the point you tried to plug the Ford IDS into a Mazda or vice versa. Then you catch scan tool hell for trying to use one IDS across both brands. My last shop had Mazda IDS and I'm pretty damn sure we still used our Ford VCM as the pass through for either. I only used the Mazda variant once or twice and that was years ago though. Is it safe to say Jag and Land Rover's scan tools would also be a variant of the IDS?
@@BrianMann216 early this summer I was unable to program a Jaguar TCM , drew technologies couldn’t even help. I was unable to even access the site . Another shop installed a used TCM it was in limp in then another shop installed a transmission still in limp in . The pcm and TCM were mismatched vin . The car went to the auction the customer wouldn’t put a new TCM in it and Jaguar wouldn’t program a used one .
@@geraldwilliams3550 I am not familiar with jag / LR at all.. there are huge differences between manufacturers, not to mention between models and yesrs... not really applied and oranges.. I do appreciate the information, will keep in mind if any one asks me.
Hello Brian , I enjoy your videos. I have a question. Is it possible to program a used TECHM in a 2010 Chevrolet Cruise with a 6t40e transmission . I have a customer I diagnosed a bad techm ( P0601 ) it has power , ground and communication. The customer wants to put a used one in . He is a wholesaler he buys and sells at auction and does no retail sales . He always wants everything as low cost as possible. Thank you .
Yes it is possible, However it may not work, technically speaking GM says that is not possible with a global A vehicle, I have personally done it and succeeded and I have also done it and had it fail and not recover, also one time programming did not complete however it shifted fined and no lights.
@@BrianMann216 thank you for the reply . I’m going to convince him it’s a bad idea as it’s a tough job I don’t want to do twice . I would charge him for both . By the way I lived in Cleveland For a number of years in the late 80s early 90s . I worked at Central Cadillac and then Chesterland Auto body as a mechanic . The Owners were really nice people at Chesterland . Thank you again .
@@geraldwilliams3550 you are welcome.. i just did a used tcm yesterday in a 11 regal wich is a global a vehicle and it did work, I have had the same vehicle fail and get locked up, so it may really depend on the actual used module itself.
in an instance i need your help how can i get a hold of you? i got a question for you Brian do you have a hard time getting through to Opus IVS i cant seem to buy anything from them they never answer...... i need a Honda Mongoose Cable i have others just that one..... oh no Nissan either!!!!! lol..... can you get me a honda cable?
Hi Brian, I would like to reprogram the new ECU, ABS, and gauge cluster for 2017 Honda Civic SI. I got the MongoosePro interface, but I can’t buy the I-HDS professional software because the locksmith license will be required. Is there any way that you can help me to solve this issue please ? I live in north California. Thanks
@@BrianMann216 Hi Brian, I checked with Autel, and these scan tool can't do programming. Especially , new models of Honda require the i_HDS system with immobilizer code which only the dealer can access. I just wonder if you can do program through TeamViewer software ? I can pay for you through Venmo or Zelle. Thanks
You need way more of these videos. Bench flashing Bosch ECUs and getting into the hacking and cracking of those is becoming a huge interest for many.
Brian, your way of showing how it should be done just watching the video gives me great confidence I can only imagine how good it would be having you right there using zoom good times ahead thanks for your time.
Thank you for this administration
Brian, u r AWESOME thanks for all the information and the time u spending to do all this really appreciated. cheeeeeers
My pleasure!
This video is a great deal of learning. Thanks.
Love these programming videos Brian. Keep them coming sir.
Thanks for the video. I want to reprogram the "zero miles left" gauge on my 2016 Honda Civic. Because it comes way too early, two gallons are still in the gas tank. Is it possible to chance that?
That one is over my head for sure!!
Is the J box necessary only to Re-program the PCM/ECM? This is something I will ever do or need to do. All I need the software for is to read codes and run actuators such as the EPB to replace the rear pads. I saw one video that showed that they had to clear or erase to start a diagnostics which looked dangerous maybe that was to clear the buffer and not the PCM/ECM? Without the J box is there a way to screw up the Honda PCM/ECM? Will this software work on 2020 through 2022 Honda Accord Hybrid Touring models?
The ihds is the factory/ oe software so it will do the required functions, ( immobilizer issues may require LSID)
Can this software do activate cruise control for honda jazz 2011?
Thanks for your videos bro !!! I really appreciate it God bless you
Glad you like them! Thanks for watching.
Thanks for sharing Brian... Cheers.
Have question regarding j2354. I added paddle shifter to my honda but the feature on the ecu is not displaying. When i program the ecu will it show?
Brian thank you for sharing. A lot has happened in my life since we last talked. I will message you later. Thanks buddy 🇺🇸
We will catch up, give me a call or PM me.
Is this the same for a blank brand new pcm? How would it pull calibration number from a blank pcm.
Great information Brian. I have a question. Can you write a vin number on an older honda's like 2002 with the j2534 ? I have the same cardaq 3 plus and i do programming, but not sure for older models if i can write the vin number if the customer got a used pcm from the junkyard. Please let me know and thanks for the great videos. God bless and keep posting wonderful videos.
If the vin function is available ( some older ones ,not sure what year, dont even store the vin. ) using ihds it is usually pretty simple when the vehicle is identified.
@@BrianMann216 ok. Thank u Brian
hey did you get yourself figured out here. Last week i unstalled a used pcm in a 06 civic that a injector went bad on and wrecked the pcm wrote it with a autel scan tool worked well for that situation was a maxisys 908
What is the latest and more recent OEM factory scan tool & professional software introduced by honda and it's repair dealers uses exclusively ?many thanks in advance
Ihds it's available to any one( not sure of international restrictions)
Awesome job
Great video. I want to scan my 2014 Accord since the EPS light came on. I will rent the HDS from Honda for one day but can I use any j2534? Or should it be a special brand?
I prefer cardaq 3 plus, drew mongoose is great aswell
@@BrianMann216 Thank you!
Hello friend, I have a Honda Odyssey from 2009-2010, I get an error 86-01: cannon relation error, and I erased the code with scanner launch but later I got another message and it says like this: Caution, the ABS control unit It interrupts the communication at more than 50 km/h (30 MPH). Could you please help me how to solve this problem.
Can you use this program to re-write the VIN number on the ECU? I have to get my ecu replaced but i am reading online that the replacement ECU needs to be programmed to have my cars VIN. I have a 2004 honda crv
Many scan tools including ihds should rewrite the vin for hondas
Brain do you have any training videos on using IHDS ot techstream for immbolizer reprogram(REPLACEMENT) using LSID. OR CHANGE IN ECU needs immbolizer reset code ...
Ibdont think I have any ihds homda immobilizer videos
@@BrianMann216 thanks
Brian please tell me if I need to upgrade on my 2007 cr-v 2.4 engine I replace the idle control valve, is showing code 507 ,
I am not aware of update for that code. Check your SI
Good morning, any idea on 2018 crv. no fm volume on fm but usb and Bluetooth works fine
Not off the top of my head
@@BrianMann216 I got through today thanks, the customer was in a rear accident and the radio transmitter located in the right rear fender had one of the connector out . Probably disconnected it to repair the bounce . Connected it and solved the issue.
I'm looking at it and I see Honda's name all over it, but in so many ways it looks so much like Fords IDS. Brian; does the HDS have a Ford scan tool feel to it as you use it?
no it is a bit different to me , although I think either Textron or Raytheon (not sure) of parent company but Teradyne designed them. Feel free to chime in if you know!. I will tell you that Ford, Honda, Mazda, Jag / Landrover will not work on the same windows computer without bootable partition to the best of my knowledge as the creators of these software use the same system resources....
@@BrianMann216 What I was getting at was the general aesthetic sense of the two systems. I saw them as eerily similar, but not the same. My meaningful hands on time with factory scan tools is limited to IDS and WiTECH2. I couldn't tell you who designed any of them either. I'm just excited when I can figure out how to make any of them work. I have seen Mazda's IDS and it was identical to Ford's IDS right up to the point you tried to plug the Ford IDS into a Mazda or vice versa. Then you catch scan tool hell for trying to use one IDS across both brands. My last shop had Mazda IDS and I'm pretty damn sure we still used our Ford VCM as the pass through for either. I only used the Mazda variant once or twice and that was years ago though. Is it safe to say Jag and Land Rover's scan tools would also be a variant of the IDS?
@@shauno3697 Yes i think Jag LR are very similar, I agree mazda and ford nearly identical, honda has the same " ding: sound as ford Ids
@@BrianMann216 early this summer I was unable to program a Jaguar TCM , drew technologies couldn’t even help. I was unable to even access the site . Another shop installed a used TCM it was in limp in then another shop installed a transmission still in limp in . The pcm and TCM were mismatched vin . The car went to the auction the customer wouldn’t put a new TCM in it and Jaguar wouldn’t program a used one .
@@geraldwilliams3550 I am not familiar with jag / LR at all.. there are huge differences between manufacturers, not to mention between models and yesrs... not really applied and oranges.. I do appreciate the information, will keep in mind if any one asks me.
Hello Brian , I enjoy your videos. I have a question. Is it possible to program a used TECHM in a 2010 Chevrolet Cruise with a 6t40e transmission . I have a customer I diagnosed a bad techm ( P0601 ) it has power , ground and communication. The customer wants to put a used one in . He is a wholesaler he buys and sells at auction and does no retail sales . He always wants everything as low cost as possible. Thank you .
Yes it is possible, However it may not work, technically speaking GM says that is not possible with a global A vehicle, I have personally done it and succeeded and I have also done it and had it fail and not recover, also one time programming did not complete however it shifted fined and no lights.
@@BrianMann216 thank you for the reply . I’m going to convince him it’s a bad idea as it’s a tough job I don’t want to do twice . I would charge him for both . By the way I lived in Cleveland For a number of years in the late 80s early 90s . I worked at Central Cadillac and then Chesterland Auto body as a mechanic . The Owners were really nice people at Chesterland . Thank you again .
@@geraldwilliams3550 you are welcome.. i just did a used tcm yesterday in a 11 regal wich is a global a vehicle and it did work, I have had the same vehicle fail and get locked up, so it may really depend on the actual used module itself.
How do you get the hds login that you used? I need to do a vsa update in my civic and I'm pretty sure that login is needed to access it.
Purchase a subscription from honda service express
Is the 14v power supply absolutely necessary or can I go ahead and run the rewrite program with the car battery connected as is? Love the vids btw
Thanks for watching. I highly recommend using a battery maintainer. You will be bumming if it goes too low or dead while programming.
in an instance i need your help how can i get a hold of you? i got a question for you Brian do you have a hard time getting through to Opus IVS i cant seem to buy anything from them they never answer...... i need a Honda Mongoose Cable i have others just that one..... oh no Nissan either!!!!! lol..... can you get me a honda cable?
I do not sell any tooling at this time. I have not been in contact with opus for some time now.
Hi Brian, I would like to reprogram the new ECU, ABS, and gauge cluster for 2017 Honda Civic SI. I got the MongoosePro interface, but I can’t buy the I-HDS professional software because the locksmith license will be required. Is there any way that you can help me to solve this issue please ? I live in north California. Thanks
I think autel 508 or 608 will take care of the ecm security , you do not need lsid for the reprogramming that I know of. Are modules new?
@@BrianMann216 Thanks for your response. These modules are OEM used that I bought from eBay.
@@BrianMann216 Hi Brian, I checked with Autel, and these scan tool can't do programming. Especially , new models of Honda require the i_HDS system with immobilizer code which only the dealer can access. I just wonder if you can do program through TeamViewer software ? I can pay for you through Venmo or Zelle. Thanks
@@khiemdo5527 I am sorry that I am not able to help in that way.
@@BrianMann216 Thanks Brian any way
Hi brian, having issues when I try to make reflash an error unzipping file…you have an idea how can I solve that? Regards
I am sorry for late response, I have not had that error. What type of vehicle/ software? Can you extract and save ?
@@BrianMann216 no worries, is the honda hds software….car is a civic 2007 R18 engine
Can I do a throttle reset for Honda civic 2011 with this?
I think the ihds software may have a reset procedure, not sure, many honda vehicles " reset" by letting them idle for 10 minutes.
Hey Brian can i program GM and Honda using the same laptop?
Yes that should not be a problem to the best of my knowledge. Honda, Ford, Mazda, jag LR dont play well together.
thanks
Plz I have Honda Civic I shit problem how if much cost ?? I buy that software?
Software is expensive. J2543 passthru is expensive. Cheaper to pay a professional to do it.
Sir download link send me
Brian can you save my life please I need someone to walk me through the gna600 hds tool to reprogram my new key for my 2007 civic si. Please help lol
I am not familiar with gna600, you have to have the pin code if you are using the honda tool.