Thank you so much Terry! It is a bit pricey but man for the details it’s worth it. Thanks for watching and commenting! Tried my best to get you guys codes to save some money. This one will get you about it $25 off this plane! FMS48NR
HAHAHA! So happy to hear I’m not the only one. I didn’t even realize I was walking all over the place until Hangar14 said something lol. I do the same thing talking on the phone, so maybe that’s connected somehow 😂
It's easier to fly than your 64s. It's the price that gets in your head. lol. Use a little bit more rudder in your turns. The nose is too high in the turns which can cause a high speed or low-speed stall of the wing. You should also use more rudders in your landings. Using the Ailerons is a recipe for a tip stall on the approach as ailerons create lots of drag. The best way to get good at rudder is to buy any Twisted Hobbies 32" Standard Series Profile 3D plane cause they fly in slow motion. Practice doing harriers and you will become good at using a rudder and elevator which helps with landings and coordinated turns. Less chance of tip stalling and fly more scale. Plus the Twisted Hobbies profiles are made of EPP and almost indestructible. It will give you much more confidence when flying your bigger more expensive planes. Plus they are a hoot! You can later put steamers on them and 3D Plane combat.😂
A great call out. I almost never use rudder, I blame it on my 64mm that I’ve flown the most that has no rudder 😅 When turning and using rudder, do you do opposite rudder or turn the rudder same direction? Good call on the 3D plane that makes sense! I’ll start taking a peak
@@Mach3RCYou will turn the rudder in the same direction when making a turn. You use cross control opposite the rudder when performing slips when landing. That's another thing a 3D plane will teach you. I recommend twisted hobbies because they fly in slow motion so you have time to figure out what you are doing. The 32 series is the best. They can take a serious beating and if it does break regular CA glue and accelerator fixes it right up. Mine is 6 years old and still flies like brand new. I only had to repair it 3 times and they were serious crashes. You and Hanger 14 should get them and do 3D combat. You try to cut each other's streamers. They sell the Streamers at Twisted Hobbies. So much fun plus you learn a lot about the rudder. That's right the 64mm EDFs are yank and banks, lol. When you 3D combat you practice hovering and the other person tries to cut your streamer while you hover. So fun! Going to go watch your new video, lol.
What’s your go-to Jet for grass ops? Let me know! Check out the FMS F-86 here bit.ly/4frAhvp
USE THIS CODE TO SAVE 5% OFF THIS JET! FMS48NR
Viper 90mm. You need to try one!
awesome plane and flight dude 👍👍😀😀😎😎
Thank you so much!! 🙏🏻
F-86 is GRASS APPROVED! Such a good looking and flying plane!
🫡 appreciate you helping out so much brotha!
Beautiful landing and flight 👏🏻
Appreciate youuuu!
That landing was BUUUDDDDAAAAAHHHHH!! If a jet can handle grass ops.. ITS A SOLIIIDDD UNIT🔥
Haha thank you sir!! I truly love flying this thing so much. I dream of a paved runway.. MAYBE ONE DAY 🙏🏻
I love watching your flights guy! Especially like the enthusiasm. Beautiful plane too, but still pricey for me. Thanks for sharing.
Thank you so much Terry! It is a bit pricey but man for the details it’s worth it. Thanks for watching and commenting! Tried my best to get you guys codes to save some money. This one will get you about it $25 off this plane! FMS48NR
That was super nice landing!!!
Thank you sir!
Haha I walk around tho .. need to watch out for the molehills 😂
Oh man. I can only imagine losing my feet, face straight in the ground and then the plane goes with it lmao
I cant stand still when i fly either 😅
I start in one end of the runway and usually end up at the other end by the time im landing 😂 4:04
HAHAHA! So happy to hear I’m not the only one. I didn’t even realize I was walking all over the place until Hangar14 said something lol. I do the same thing talking on the phone, so maybe that’s connected somehow 😂
@Mach3RC it's just how our brains work man! Gotta stay on the move all the time just like those edfs
It's easier to fly than your 64s. It's the price that gets in your head. lol. Use a little bit more rudder in your turns. The nose is too high in the turns which can cause a high speed or low-speed stall of the wing. You should also use more rudders in your landings. Using the Ailerons is a recipe for a tip stall on the approach as ailerons create lots of drag. The best way to get good at rudder is to buy any Twisted Hobbies 32" Standard Series Profile 3D plane cause they fly in slow motion. Practice doing harriers and you will become good at using a rudder and elevator which helps with landings and coordinated turns. Less chance of tip stalling and fly more scale. Plus the Twisted Hobbies profiles are made of EPP and almost indestructible. It will give you much more confidence when flying your bigger more expensive planes. Plus they are a hoot! You can later put steamers on them and 3D Plane combat.😂
A great call out. I almost never use rudder, I blame it on my 64mm that I’ve flown the most that has no rudder 😅 When turning and using rudder, do you do opposite rudder or turn the rudder same direction?
Good call on the 3D plane that makes sense! I’ll start taking a peak
@@Mach3RCYou will turn the rudder in the same direction when making a turn. You use cross control opposite the rudder when performing slips when landing. That's another thing a 3D plane will teach you. I recommend twisted hobbies because they fly in slow motion so you have time to figure out what you are doing. The 32 series is the best. They can take a serious beating and if it does break regular CA glue and accelerator fixes it right up. Mine is 6 years old and still flies like brand new. I only had to repair it 3 times and they were serious crashes. You and Hanger 14 should get them and do 3D combat. You try to cut each other's streamers. They sell the Streamers at Twisted Hobbies. So much fun plus you learn a lot about the rudder. That's right the 64mm EDFs are yank and banks, lol. When you 3D combat you practice hovering and the other person tries to cut your streamer while you hover. So fun! Going to go watch your new video, lol.
can you leave a link for your f-16 64 mm remote
I use the same remote for all of my planes bit.ly/4fc9hzH