Last November with my dad (this guy) we took a lot of plains game with the TTSX in 9.3x62 and he took a great old dagga boy buffalo with a TSX in that same rifle. I got back-to-front penetration on a wildebeest that I had to follow up on, which is at least four feet of penetration.
@@moomoojuiceman I own for the past 18 years a CZ 550 in 9.3x62 Mauser then shoot exclusively the Barns TSX 286 grain bullet for my Alaskan guide work rifle. I would tell you to use the 9.3 x 62 for what PH hunters have said to use the 9.3 for shooting to around 375 yard and closer the better. Now I have finished off Brown bears with the 9.3 load I just wrote about to 350 yard when the bear was on the retreat and no other option of getting close was there, so it was shoot or possible cause allot more problems latter looking for the bear. Never have I recovered a Barns bullet so no idea what they look like after a pass through? Don't get your panties all in a pinch over if the bullet expands or not because I also use the Barns 286 grain solids then have the same killing affects as the Barns TSX. The bullet passing through big game animal with the power the 9.3 puts out may it be a barns TSX or a Solid they kill fast !
@@moomoojuiceman For me, I restrict to ~275 yards with 250g tsx or ttsx. Around 250 yards for 286g. Never been a problem and almost all shots are within 150 yards where I've hunted. If you're hunting very open areas and think 350+ yards is likely, then I'd go with one of the 300 mags, 7 mags, or 338mag, depending on the game. For 95% of hunting scenarios and big game animals (whitetail, muleys, elk, moose, bison, all bears), you can't go wrong with the 9.3x62. I have two CZ 550s in 9.3x62 (one scoped for out to 275 yards and open sights on the other for up to 150 yards/wooded areas). Also, for those not familiar with the round, the recoil is not a problem. It really is a much slower push, than a snappy smaller caliber magnum, thereby facilitating excellent accuracy at the ranges above. At least that's my experience.
Simply an OUTSTANDING video by Joseph. I learned an enormous amount. Younger hunters have no idea how crappy terminal bullet performance in the 1970's was. The price of Cu skyrocketed partly due to the Vietnam war. Antimony being expensive was not used in enough quantities to harden lead sufficiently. But high velocties were already in vogue and the bullets simply fragmented on hitting say a heavy shoulder bone. Factory ammo made by Winchester was especially poor when used in 270 and 243 caliber. Huge numbers of antelope were wounded and left to die a lingering death in the thick bushveld of Southern Africa. Thankfully modern projectiles are far superior.
Ex WWII Lee Enfields were common and dirt cheap. Provided you could get one with a decent barrel... the best cartridge was a 215gr trundeling out the muzzle at about 1960 fps. The very modest velocity and 'heavy for calibre' compensated for inferior bullet construction and was deadly on kudu size game up to 150 yds.
Speed kills with Copper thats why i use 130gr TTSX in my 308 at 3021ft/s and 123gr Fox Classic Hunter at 2985ft/s in my 6,5x55SE both work great from our little Roe to even the biggest Wildboar Keiler and big Red Stag, i still go for behind the Shoulder deep Heart Lung / yesterday i have shot a Red Deer (1 Year old 55kg) it ran 25m and dropped the Heart wasnt even existing anymore with my 6.5 Swede, this is the normal Distance they get before they go down
This has to be the third time I’ve watched this video 😂. You, Spomer and Ryan Muckenhirn from Vortex podcast love the mono bullets. Gotta be something to it.
Joseph you have one of the top UA-cam channels around. This was an exception good one. Your content is always informative and top notch. With all the new bullets and caliber designs this is a perfect time for you to share information about lead core and monolithic bullets. Thanks for your tip about ammonia. You’re always a wealth of information thanks for sharing. Keep up the good work and happy trails.
For me its either Hammer HHT or HORNADY ELDM'S. Rapid expansion and fragmenting inside the vitals is super quick death. Way faster then a TTSX. Remember folks these animals aren't armor plated. You are also NOT shooting a 800 lb elk only a section on an 800 lb elk. With a whitetail buck to an elk shoulder you are looking at a mm. Yes 1 mm difference. And about 1 to 2 " more penetration to get to the vitals. Thats it. They are not armored. Bullets that break up cause way more DRT then a fully bonded bullet. It just does.
Excellent overview of all things monometal bullets from start to finish. I don’t have on game experience yet with copper bullets but I have shot them some in both my 270 Win and 300 WSM. The 180 grain Hornady GMX in the Outfitter shot well in my Savage M110 Long Range Hunter in 300 WSM and I have 150 grain Barnes TTSX but have yet to load them. I have zero experience loading copper bullets but need to change that. My youngest brother loaded some 130 CX bullets for my 270 Win and we found a load that works well in it, and need to load up more and do more testing and take it hunting. Especially on the Wyoming mule deer 🦌 and pronghorn combo hunt that I want to do next fall. 😃🤠
Great vid as always, very interesting topic how bullets 'kill'. Since smokeless powders, things have actually not evolved that much in hunting firearms. Exception is better powders = more speed, now needing harder bullet material to have a predictable rate of expansion, we can make bullets from harder metals such as copper for expansion at higher velocities equaling better killing power even further out....Yet shooting a cast bullet was the best for hundreds of years. What changed? We dont have to risk losing an animal but getting to close in a stalk and spooking before we have a shot, or not risking getting too close to dangerous game. With modern powders, too fast with cast lead it might over expand or even come apart mid air. We need harder bullet metal... Alot of bullet casters are experimenting with cast zinc bullets as you can shoot high velocity - there is promise with a cast zinc / lead core rifle bullet that would be cheap and easy for anyone to make a home without the 50 cent over a dollar price per bullet, and still deliver performance downrange.I do like the Barnes TTSX, but not the price. I also like the fact that as a reloader bullet caster, if you get lead for free as in sweat equity - (sifting range scrap lead at a shooting range) - my biggest cost is the primer. Hunting ammo is expensive BECAUSE of the bullet. Zinc wheel weights are free at least at this point... as a bullet caster it would be great to develop a cast zinc/lead core bullet that was effective and could be cast by the home user....working on it :)
I think copper bullets really shine when using a lighter cartridge on larger game with a recoil-sensitive hunter. They will be far more accurate and, therefore, deadly with something that is comfortable to shoot than if they are flinching in anticipation of the kick. Copper has some ballistic limitations that must be considered, and i think it's best to try to punch it through the shoulder instead of the more traditional behind the crease shot. So far, my experience has been that copper kills just as fast, but we have a lot less meat loss.
While I'm not a "big game" hunter, I grew up hunting a lot of birds (duck, quail, dove, etc) with our family. My little Cherokee grandmother absolutely LOVED hunting & fishing so we had lots of locally harvested Thanksgiving & Christmas meals!!! We used to have contests to see who had the most bird shot on their plate with prizes for the person with the most ;-) I miss those meals, my grandparents and HUGE family gatherings enjoying our catch/hunting bag... Unfortunately America has changed!!! Safe travels sir👍🙏😇
Nice black bear hide behind you, mountain man! Bought some copper bullets from Federal,Barnes, and Sig Sauer for my 6.5 creedmoor to try as a comparison! First heard about them from Spomer, and first thought they might give me a “edge “ over lead! Thanks for your expertise and extensive discussion!! Man, I just hope I can remember 1/2 of what you talked about!!!
Awesome knowledge dump. I missed only one downside of the monos, and it’s a big one in my opinion. In case of them shedding petals inconsistently, they leave their original straight path and can go wherever. Not what you want to see if vitals are on the intended trajectory
I used the Hornady Cx in cal 300 win mag a lot during this plain game season in Limpopo, in this region the savannah is somewhat more closed and our shots rarely go further than 150 meters, this allows me to work at lower speeds, (1,800 fps) with 180 tips, with incredible effects. In May we hunted more than 150 antelopes of all sizes with the CX, with great results, however on 30/06 I didn't get the same results, with the powder I had (vihtavuory 540) I couldn't accelerate them to the 2,700 I wanted... and I have used Nosler accubond 180 with great precision and killing power.
I’m hearing so much about these copper rounds that I’m going to try them in a few calibers this year on my whitetail rigs, my son’s .308 130 gr Barnes TTSX 3140 and .270 Weatherby Mag. 130 gr Barnes TTSX 3350 fps. I still love my Bonded terminal ascent and swift Scirroco in my .30-06 though. Definitely gonna give it a try in these other two, who knows, maybe I’ll make the switch in my .30-06 too by years end.
Shoulder shot on big whitetail doe at 80 yards with .270 win 130 grain Hornady CX. Bang flop. Complete pass through. I switched from Nosler Partition (which were always very effective) because I want to get the lead out of my diet.
AAA awesome quality informative talk thank you. There still isn’t a perfect bullet and so many variables with tough elusive unpredictable beasts, not to mention the variety of terrains they are found in. I have been giving more consideration to the bullet placement to match the bullet when the game and scenario cooperates lately.
I think it's worth mentioning that you do get significant lead contamination in meat and hunters/family members using lead bullets have been shown to have elevated lead in their blood. Not only go lead-free bullets perform well with great penetration/expansion, but you don't run the risk of consuming lead.
I've tried to post all of the references, but they don't upload for some reason. It's very true and there's ample scientific literature on the subject. You can search PubMed or google scholar and it's easy to find dozens of peer-reviewed scientific papers on the topic. At the very least, I wouldn't let kids or pregnant women eat game that's been shot with lead bullets. Game shot with lead-free is very likely safer than store-bought meat and lead bullet-shot meat.
Iqbal et al. (2009) Hunting with lead: association between blood lead levels and wild game consumption. Env Res 109(8):952-959. Johansen et al. (2006) Lead shot from hunting as a source of lead in human blood. Env Pol 142(1):93-97. Meltzer et al. (2013) Consumption of lead-shot cervid meat and blood lead concentrations in a group of adult Norwegians. Env Res 127:29-39 Hunt et al. (2009) Lead bullet fragments in vension from rifle-killed deer: potential for human dietary exposure. PLoS One 4(4):e5330. Tsuji et al. (2008) The identification of lead ammunition as a source of lead exposure in First Nations: The use of lead isotope ratios. Sci Tot Env 393:291-298. Levesque et al. (2003) Monitoring of umbilical cord blood lead levels and sources assessment among the Inuit. Occup Env Med 60(9) Bellinger et al. (2013) Health risks from lead-based ammunition in the environment. Env Health Prosp 121(6):a178-a179.
I went to the Barnes TTSX 140 grain for my 7 mm '08 this past year. Took three deer with it, all. Head neck intersection shots farthest was 225 yd! I went to that bullet feeling that being me 59 years old. I might see in my lifetime that lead bullets are going to be outlawed in Pennsylvania at some point.... Not sure of that but and I rebuilt my 708 which is a Thompson center venture. And I'm getting 1/2-inch groups at 2,850 ft per second!
Thank you for this break down. What happens at the other side of the hunting range. If your in tight cover (less than 25 yards) with a moose or brown bear how does the copper preform. Can we expect similar stopping power to lead out of the same gun
If anything, copper bullets may provide more "stopping power" than lead-core bullets due to penetration! Copper, controlled expansion bullets often penetrate much, MUCH deeper than your average lead core bullet, therefore you may find increased lethality.
I wish that I had found this video before ordering mono-copper bullets for several of my big game rifles. In the areas where I hunt I need the animals to drop and not run down the mountain side. It sounds like the copper kills slower than lead core and that will be a problem for me.
@@darinbarber2922 Well, not quite... With good shot placement, and within reasonable hunting ranges, monometals will kill just as easily as lead bullets. It's when your shots land on the edge or outside of the vital zone that you're more likely to have a long tracking job.
Idk if you said but yea it seems like you need to clean the barrel when switching to mono. I was shooting hornady eldx factory 338 win mag. Not so great. Tested Barnes ttsx hand loads. All over the place. Cleaned the barrel then I got 1 moa
The barns ttsx is wonderful in the now extinct 338 rcm. 160 gr at 2950 out of a 20 inch barrel makes a wonderful all around rifle suitable for all north american game.
Don't call It extint. Blaser has revived it. It's called the 8,5x55 blaser and the 160 grain ttsx is one of the offered loads. It seems to be one hell of an all rounder.
OK... let's explore high-technology bullets. None seem to want to talk about. Specifically, DRT bullets. Supposedly, they can shoot through glass, brick, and bone. Then, encountering liquid, they disintegrate into a swirl of fine metallic powder, which is compressed inside the jacket. They are supposed to be accurate and won't ricochet from one animal to another. They do not spoil meat. That explosive cloud of powdered metal destroys all organs instantly, causing sudden blood pressure drops and quick kills. Here's where it gets interesting... even small cartridges loaded with DRT bullets kill big animals. It's like 1 shot and done! They have an older video, where a cow elk out there, dropped instantly to one DRT 243! Over the phone, they told me they shot a big bull elk at 600 yards, 1 shot with their 243 Win load! An African hunting guide says DRT bullets shot out of 223, kills all the plains game! I watched 223 DRT loads drop Oryx, and 1 shot a piece on a US ranch! Just the other day, I called DRT and was told the 6.5 Creedmoor dropped bigger animals than the elk and black bear effectiveness I inquired about! Think about this... I get a dinky accurate 6.5, and with DRT loads, I can drop all Western big game with 1 well placed shot, 400 to as they claim, 600 yards. If so, why shoot bigger cartridges? What if their technology really has changed the game? Sounds too good to be true. But what if it is. During my call, I surmised this tech is deliberately suppressed. They agreed. That hunters don't get the technology and fear exploding bullets. That the traditional bullet industry fears what DRT brings to the table? I intend to find out. I have always favored using big guns... 300 Weatherby, 300 RUM, 338Win, 375 Ruger. But dang, I just may buy a Springfield Waypoint in 6.5 Creedmoor and go after Black Bear and Elk with the DRT load! Gun writers seem to poh- poh DRT? I ask that you try DRT, as it would be interesting to hear about your results😊
When you were talking about the hydrodynamic shock expanding monometals do, youre referring to the same effect bullet engineers from federal mentioned of tearing damage inches away from the direct path of the bullet when impact velocities exceed ~2200 fps?
Excellent video thank you! I bought a 280ai in the covid days and was unable to find much of any 7mm bullets on the market. Have always been a accubond fan but finally found hammer were available. I loaded up some hammer hunter 143 grain bullets and the gun will shoot consistantly under .5 inch groups with them. Have only taken one deer so far with the rig but i am planning a moose hunt this fall. In your opinion are the hammer hunter 143 s a good option for me? I am shooting them at 3060fps with 4831sc powder?
When you talked of the performance of expanding monometals early on, isnt that the same case for expanding bonded lead core soft points? Around 13:05 it started to get a little vague if you were talking about bonded lead core stuff like federal fusion, or fragmenting match rounds with a lead core
I am studying all these bullet type videos to benefit all of us in those 3 or 4 short, slow, straight walled states, or thick wooded slow short ranged rifles. The monolithic or monometal bullets are uncertain to me because it seems that every "expert " tells us the monumetal has to be 2000 fps +/- . So which of these do you suggest, if any? As of right now it seems that my only option is a bonded or cup & core. What ya'll thinkin?
For hunting in those states that you mentioned, at the ranges that you’ll be shooting and those cartridges are really effective, a cup and core bullet will be just fine.
48 min mark Clean barrel section. ??? In your experience with those you have tested.. Have you noticed any difference between the Alloys Mono n Regular Cup n Core.ie shooting both. I do know your most correct on the all Copper Clean n dont mix. Cant say for sure on the Alloys yet. Ie Win Deer Season n Copper Impact. ETIPS As well. Carry on.
Question. Planning a float moose hunt. Have a 358 Norma mag with 250 Partitions that shoots crazy well. Love the monos in my 06 for elk. Would you bother to work up a mono load for the 358 or stick with the old Noslers.
Have you seen accuracy issues shooting copper and lead bullets? I have a tikka .308 shooting .5 moa with the 150ttsx. I’m afraid to shoot any lead through the gun with the copper shooting so well. I appreciate your thoughts!
I'm not Joseph, but I have personal experience with my rifles. For my rifles to shoot mono-metal, I had to clean out all the Lead jacketed copper out. I can still shoot the jacketed bullets fairly accurately after the mono-metal. However, you must clean out all the copper again to get back to the accuracy for the mono-metal.
Barnes TTSX are 100% copper. Other makers use 100% copper. Some, like Hornady and Nosler, use gilding metal for their monometal and jacketed bullets, which is 95% copper, with the balance being zinc. Swapping back and forth between gilding metal and pure copper CAN cause accuracy and fouling issues to arise. The solution if this problem is encountered is to thoroughly remove the copper fouling from the bore before swapping between copper and gilding metal.
Copper weighs 79% that of lead. Conversely, your copper bullet will be 25% larger than a solid lead bullet and closer to a jacketed bullet depending on how thick the jacket is.
You need to expand on the euro monos.. Norma has a 2 one of which is Tin Core. Kinda like Barnes MRX only " green " bullet with on game use. S&B has 2 TXRG Engery Blue Spitzer n a New Edge which is like there SPCE.. Shot the 180gr 06 still trying to get my hands on 7x57 n 8x57 n 06 165 piggy bank hasn't allowed yet. N Hornady has a European line with a slightly different CX Would like get hands on them in 7x57 8x57 or just the bullets.
Yep, and Barnes also makes the lead-core Original, which I'm partial to in my .45-90 lever-action. But the company's primary focus is monometal bullets! Great projectiles, all of them.
@@BackcountryHuntingPodcast also. What's your thoughts on the factory Barnes 280 Ackley ammo ?? I am sort of interested in trying g some. But my shots are close normally. In the north east . So I probably do not need the high BC stuff. But am curious about how it does.
Hallo Benedikt aus der Schweiz Vergleich doch einmal "Messing-Führbandgeschosse" mit Kupferprojektilen. Lutz Möller war ein Pionier in der Entwicklung heuter bieten verschiedene Hersteller wie "Sax Bullet" "GM Geschossmanufaktur" oder "Fox Bullet" kontrolliert zerlegende Geschosse ...
Fox Classic Hunter sind keine Zerleger sondern Deformierer und auch nicht aus Messing das LOS HT fällt mir da noch ein als Zerleger aus Messing ähnlich wie das SAX und die Lutz Möller Dinger 😉 Gruß aus Deutschland Ich mag Deformierer wie Barnes TTSX, Fox Classic Hunter, Hornady CX und ECX lieber als Zerleger
... a bullet I have hunted with that drops big game like a abattoir sledge hammer and doesn't break the bank is the Winchester Power Max Bonded bullet ... don't see much of it on store shelves these days
Great video. Would like to point out one issues though. Heavy metal poisoning if passed down from the mother. Having a child with special needs, you would be astonished at the amount of heavy metals that are found in these children’s bodies. Most HM are nearly impossible to detox without a specialist and medical assistance. Our society is already extremely toxic and it is only getting worse, so try and keep the lead away from your food if possible.
absolutely correct. TSX/TTSX, RWS Evo, Federal lead-free power-shok, Nosler expansion tip, ELD-X, Naturalis, etc. and steel shot for waterfowl/upland work great. Great penetration, great expansion, exit hole. Doesn't make any sense to use lead unless you're not eating the meat. And aside from some invasives, CWD-infected deer/elk/moose and old Brown bear boars, you should be eating the meat.
Not sure you know who you're chastizing. He even pointed out that you want to try to get a few shots into the animal, but if it disappears at the shot, you give it some time and then go track it.
I have been forced to use them for years now Calif. I don't like them at all. they almost all pass through without good expansion I've used many different brands. When out of state hunting, I always use normal bullets of many brands and types.
Bonded lead core are not going anywhere. And the partitions style bullets are also not going anywhere, except on the top of the pile. We need to loose these rebrand target bullets that some guys hunt with. Silly
👍 Nosler Partition & Accubond, Norma Bondstrike & Oryx, Speer Hotcore & Gold Dot or even cheap as Dirt Cup & Core Hornady SST all work great on Game or Monolith like Barnes TTSX all of them can be as Accurate then Targetloads ......... i dont know why anybody would Hunt with Target Bullets that are simply not build for the Job ok on Varmints or Crows ... with Sierra SMK or TMK or normal Hornady BTHP but even there Sierra Blitzking and Hornady VMax are better
@@lenzadlbergerdon’t forget to add that terminal ascent from federal, we’ve only taken 1 deer with it so far and unsurprisingly it was a clean pass through at 20 yards. Held together, didn’t find any chucks left behind. Was in a 6.5 cm, and they shoot fabulous through that cheap savage 110.
Some would argue that the overbuilt bullets advertised for "hunting" are less humane and built for unnecessary penetration where there are more humane but less conventional options
@NorthRiverGuide well that's just silly. 2holes are always better then 1. Might have to chase it 100yards or so but bleeding out both sides makes that easy. I've lost animals w rapid expanding bullets. I've never lost one with partitions, or terminal accents. That tells me all I need to know!
@REDNECKROOTS I'm not at all saying I'm getting only one hole, the heavy for calibre bullets that I use are more lightly constructed than bullets built for hunting and the animals aren't stopping them. They go in, create a wider permanent wound cavity than controlled expansion bullets through the vitals then exit. Even the black bear boar I recently harvested had a quartering away passthrough with a 73gr eld match shot out of 223rem. I don't think you realize how unnecessarily overbuilt those "hunting" bullets are
Monolith Bullets have their place they work if used correctly dont go for the same weightclass then traditionel Leadcore go light for Caliber and as fast as possible speed kills with Copper Bullets and give you the Results you want, i use 130gr in 308 and 123gr in 6.5, 120 in 7x57R and 140 in 7x64, i never lost a Animal with these mostly Barnes TTSX and i go for behind the Shoulder Heart so lower 1/3 of the Game i shoot yes most of the Times they run 20-30meter but then they drop, in rare instances the get 50-80m and my dog is happy to get some Work to do as well but this also happend to me with Leadcore Bonded like Nosler Partition or Norma Oryx
"mono -metal bullets" in this case, couldn't we just go with "copper"? I made it half way through, but between monometalbullets over and over, and the information strays so far from what I learn from Ron Spomer Outdoors, its just all over the place
They're not bonded, and not a centerfire cartridge, but Winchester actually just introduced a lead-free, jacketed rimfire cartridge called the .21 Sharp. It's pretty cool!
You can stay with what you like but since 1978 I have been a one profession of guiding hunters in Alaska and the Pacific NW. The Barns TSX - TTSX - LRX has proven to me and clients to be the number one killer of big game hands down no other bullets kill as fast and as sure as the Barns bullets. I am sure you have very little experiences with shooting game from deer or larger animals to know the differences how bullets kill.
In a world without legal restrictions that might be true. But the govt wants lead out of bullets. In a regulated future monos are the future. Having said that, I love a nosler bonded with a solid rear shank for SD loads
It doesn’t matter if you like them or not, they absolutely are part of the future. I run everything from old hard cast lead to solid coppers, it all works great if used appropriately. I do agree the terminal ascent is a fabulous projectile.
@@dalebenson6859 I just seen too many horror shows w monolithic projectiles. They just don't open up for crap at longer then 300 yard shots. Long distance has become the rage and I can't get behind a bullet / rifle combo that if used past 300 it will likely spell a wounded animal and or a long chase. I get that they work most the time for most people. Especially at close range. I'm a close range guy because I respect the animals too much to risk a long shot. Most guys today are taking longer n longer shots and with monos it really drops the chance for a fast kill. Lead just opens up much easier. Even bonded lead
@@jaydunbar7538 they will def be available. But it's not the future. Like I said and I stand by it. The federal terminal accent style projectile with a bonded lead front half and a solid rear shank. That is what I see a lot of companies offering in the future after the patient expires. Offers the best of both worlds in one. We gonna see 🙈🙉 eventually 😉
You kept talking about the bullets and as you can see. All you could see was there was some type bullet but nothing you were talking about. What a waste of time.
I appreciate all types of hunting and every hunter , however , if you keep ur hunting under 350-400 yards your velocity based bullets should not matter much. I don't care where you hunt...if u have to shoot past 600 yards...u ain't huntin....your shooting for bragging rights. And why are we shooting animals from the ass forwards ?
While I won’t take that shot, it’s a matter of filling the tag or not. You don’t always get a perfect shot and it’s best to be ready to take any shot you may need to take. The best shot you get on a expensive hunt you traveled across the world for may be ass first, so it’s up to you if you want to take the shot you got or go home empty handed.
@jaydunbar7538 I don't disagree with you brother however there is a lot that could go wrong before that bullet hits the boiler room....I would feel horrible crippling a exotic animal ...cheers
Depends on the caliber and barrel length. A lot of 308 with 18-20in barrels start reach some monolithic bullets minimum effective speed around 300 yards. While I personally never take a shot past 300 yards the minimum effective speed expansion is far less than ideal speeds. For deer this isn't really a concern but with elk and moose it starts to be another variable that you must take into account.
IF YOU USE STEEL PELLET SHOTGUN SHELLS,... YOU CAN EASILY WAND THE MEAT WITH ANY "PINPOINT METAL DETECTOR" TO FIND SMALL FRAGMENTS, AND AVOID INGESTING ANY OF THEM.
*THANK YOU FOR THE HONEST FIELD AND FOREST REPORT ON MONOMETAL MONOLYTIC STUFF.*
Last November with my dad (this guy) we took a lot of plains game with the TTSX in 9.3x62 and he took a great old dagga boy buffalo with a TSX in that same rifle. I got back-to-front penetration on a wildebeest that I had to follow up on, which is at least four feet of penetration.
Ive recently picked up a 9.3x62 and I was wondering what the effective range a ttsx would be in this caliber, as it's not the fastest round around
Plus you don't have to worry about eating lead in your meat
@@moomoojuiceman I own for the past 18 years a CZ 550 in 9.3x62 Mauser then shoot exclusively the Barns TSX 286 grain bullet for my Alaskan guide work rifle.
I would tell you to use the 9.3 x 62 for what PH hunters have said to use the 9.3 for shooting to around 375 yard and closer the better.
Now I have finished off Brown bears with the 9.3 load I just wrote about to 350 yard when the bear was on the retreat and no other option of getting close was there, so it was shoot or possible cause allot more problems latter looking for the bear.
Never have I recovered a Barns bullet so no idea what they look like after a pass through?
Don't get your panties all in a pinch over if the bullet expands or not because I also use the Barns 286 grain solids then have the same killing affects as the Barns TSX.
The bullet passing through big game animal with the power the 9.3 puts out may it be a barns TSX or a Solid they kill fast !
we used ours out to 300 yards with great results... particularly with the 250-grain Barnes TTSX handloads.
@@moomoojuiceman For me, I restrict to ~275 yards with 250g tsx or ttsx. Around 250 yards for 286g. Never been a problem and almost all shots are within 150 yards where I've hunted. If you're hunting very open areas and think 350+ yards is likely, then I'd go with one of the 300 mags, 7 mags, or 338mag, depending on the game. For 95% of hunting scenarios and big game animals (whitetail, muleys, elk, moose, bison, all bears), you can't go wrong with the 9.3x62. I have two CZ 550s in 9.3x62 (one scoped for out to 275 yards and open sights on the other for up to 150 yards/wooded areas). Also, for those not familiar with the round, the recoil is not a problem. It really is a much slower push, than a snappy smaller caliber magnum, thereby facilitating excellent accuracy at the ranges above. At least that's my experience.
Great job William in getting these episodes on UA-cam so quickly 👍
Thank you sir!
Simply an OUTSTANDING video by Joseph. I learned an enormous amount. Younger hunters have no idea how crappy terminal bullet performance in the 1970's was. The price of Cu skyrocketed partly due to the Vietnam war. Antimony being expensive was not used in enough quantities to harden lead sufficiently. But high velocties were already in vogue and the bullets simply fragmented on hitting say a heavy shoulder bone.
Factory ammo made by Winchester was especially poor when used in 270 and 243 caliber. Huge numbers of antelope were wounded and left to die a lingering death in the thick bushveld of Southern Africa. Thankfully modern projectiles are far superior.
Ex WWII Lee Enfields were common and dirt cheap. Provided you could get one with a decent barrel... the best cartridge was a 215gr trundeling out the muzzle at about 1960 fps. The very modest velocity and 'heavy for calibre' compensated for inferior bullet construction and was deadly on kudu size game up to 150 yds.
That's very cool!
Speed kills with Copper thats why i use 130gr TTSX in my 308 at 3021ft/s and 123gr Fox Classic Hunter at 2985ft/s in my 6,5x55SE both work great from our little Roe to even the biggest Wildboar Keiler and big Red Stag, i still go for behind the Shoulder deep Heart Lung / yesterday i have shot a Red Deer (1 Year old 55kg) it ran 25m and dropped the Heart wasnt even existing anymore with my 6.5 Swede, this is the normal Distance they get before they go down
This has to be the third time I’ve watched this video 😂. You, Spomer and Ryan Muckenhirn from Vortex podcast love the mono bullets. Gotta be something to it.
I would love to see a in-depth review of your m77 in 35 whelen
Me too!
Me too!
Joseph you have one of the top UA-cam channels around. This was an exception good one. Your content is always informative and top notch. With all the new bullets and caliber designs this is a perfect time for you to share information about lead core and monolithic bullets. Thanks for your tip about ammonia. You’re always a wealth of information thanks for sharing. Keep up the good work and happy trails.
For me its either Hammer HHT or HORNADY ELDM'S. Rapid expansion and fragmenting inside the vitals is super quick death. Way faster then a TTSX.
Remember folks these animals aren't armor plated. You are also NOT shooting a 800 lb elk only a section on an 800 lb elk. With a whitetail buck to an elk shoulder you are looking at a mm. Yes 1 mm difference. And about 1 to 2 " more penetration to get to the vitals. Thats it. They are not armored.
Bullets that break up cause way more DRT then a fully bonded bullet. It just does.
I hope you touch on the different alloys of Monolithics
Very informative information on copper bullets. I use them on many different calibers.
Excellent overview of all things monometal bullets from start to finish.
I don’t have on game experience yet with copper bullets but I have shot them some in both my 270 Win and 300 WSM. The 180 grain Hornady GMX in the Outfitter shot well in my Savage M110 Long Range Hunter in 300 WSM and I have 150 grain Barnes TTSX but have yet to load them. I have zero experience loading copper bullets but need to change that.
My youngest brother loaded some 130 CX bullets for my 270 Win and we found a load that works well in it, and need to load up more and do more testing and take it hunting. Especially on the Wyoming mule deer 🦌 and pronghorn combo hunt that I want to do next fall. 😃🤠
Love your channel and content you cover. 💯 Awesome 😎
I appreciate that!
Loved the episode. I’d like to learn more about cleaning agents. The ammonia based concern is interesting.
Great vid as always, very interesting topic how bullets 'kill'. Since smokeless powders, things have actually not evolved that much in hunting firearms. Exception is better powders = more speed, now needing harder bullet material to have a predictable rate of expansion, we can make bullets from harder metals such as copper for expansion at higher velocities equaling better killing power even further out....Yet shooting a cast bullet was the best for hundreds of years. What changed? We dont have to risk losing an animal but getting to close in a stalk and spooking before we have a shot, or not risking getting too close to dangerous game. With modern powders, too fast with cast lead it might over expand or even come apart mid air. We need harder bullet metal... Alot of bullet casters are experimenting with cast zinc bullets as you can shoot high velocity - there is promise with a cast zinc / lead core rifle bullet that would be cheap and easy for anyone to make a home without the 50 cent over a dollar price per bullet, and still deliver performance downrange.I do like the Barnes TTSX, but not the price. I also like the fact that as a reloader bullet caster, if you get lead for free as in sweat equity - (sifting range scrap lead at a shooting range) - my biggest cost is the primer. Hunting ammo is expensive BECAUSE of the bullet. Zinc wheel weights are free at least at this point... as a bullet caster it would be great to develop a cast zinc/lead core bullet that was effective and could be cast by the home user....working on it :)
Excellent information, I find it very useful. I'm stuck in California for a few more years and am forced to hunt with mono's.
I think copper bullets really shine when using a lighter cartridge on larger game with a recoil-sensitive hunter. They will be far more accurate and, therefore, deadly with something that is comfortable to shoot than if they are flinching in anticipation of the kick. Copper has some ballistic limitations that must be considered, and i think it's best to try to punch it through the shoulder instead of the more traditional behind the crease shot. So far, my experience has been that copper kills just as fast, but we have a lot less meat loss.
While I'm not a "big game" hunter, I grew up hunting a lot of birds (duck, quail, dove, etc) with our family. My little Cherokee grandmother absolutely LOVED hunting & fishing so we had lots of locally harvested Thanksgiving & Christmas meals!!! We used to have contests to see who had the most bird shot on their plate with prizes for the person with the most ;-)
I miss those meals, my grandparents and HUGE family gatherings enjoying our catch/hunting bag... Unfortunately America has changed!!!
Safe travels sir👍🙏😇
Nice black bear hide behind you, mountain man! Bought some copper bullets from Federal,Barnes, and Sig Sauer for my 6.5 creedmoor to try as a comparison! First heard about them from Spomer, and first thought they might give me a “edge “ over lead! Thanks for your expertise and extensive discussion!! Man, I just hope I can remember 1/2 of what you talked about!!!
Thanks! Glad I could be helpful.
Like and Subscribe!
Awesome knowledge dump. I missed only one downside of the monos, and it’s a big one in my opinion.
In case of them shedding petals inconsistently, they leave their original straight path and can go wherever. Not what you want to see if vitals are on the intended trajectory
I used the Hornady Cx in cal 300 win mag a lot during this plain game season in Limpopo, in this region the savannah is somewhat more closed and our shots rarely go further than 150 meters, this allows me to work at lower speeds, (1,800 fps) with 180 tips, with incredible effects. In May we hunted more than 150 antelopes of all sizes with the CX, with great results, however on 30/06 I didn't get the same results, with the powder I had (vihtavuory 540) I couldn't accelerate them to the 2,700 I wanted... and I have used Nosler accubond 180 with great precision and killing power.
I’m hearing so much about these copper rounds that I’m going to try them in a few calibers this year on my whitetail rigs, my son’s .308 130 gr Barnes TTSX 3140 and .270 Weatherby Mag. 130 gr Barnes TTSX 3350 fps.
I still love my Bonded terminal ascent and swift Scirroco in my .30-06 though. Definitely gonna give it a try in these other two, who knows, maybe I’ll make the switch in my .30-06 too by years end.
Nice review
I’m thinking bonded is really where it’s at. For me at least.
Thanks for sharing
Shoulder shot on big whitetail doe at 80 yards with .270 win 130 grain Hornady CX. Bang flop. Complete pass through. I switched from Nosler Partition (which were always very effective) because I want to get the lead out of my diet.
Great video. Thank you!
AAA awesome quality informative talk thank you. There still isn’t a perfect bullet and so many variables with tough elusive unpredictable beasts, not to mention the variety of terrains they are found in.
I have been giving more consideration to the bullet placement to match the bullet when the game and scenario cooperates lately.
Very informative, thank you.
I think it's worth mentioning that you do get significant lead contamination in meat and hunters/family members using lead bullets have been shown to have elevated lead in their blood. Not only go lead-free bullets perform well with great penetration/expansion, but you don't run the risk of consuming lead.
Where does that claim about elevated lead come from?
Not only do I doubt it, I suggest that such narratives are pure myth.
I've tried to post all of the references, but they don't upload for some reason. It's very true and there's ample scientific literature on the subject. You can search PubMed or google scholar and it's easy to find dozens of peer-reviewed scientific papers on the topic. At the very least, I wouldn't let kids or pregnant women eat game that's been shot with lead bullets. Game shot with lead-free is very likely safer than store-bought meat and lead bullet-shot meat.
Iqbal et al. (2009) Hunting with lead: association between blood lead levels and wild game consumption. Env Res 109(8):952-959.
Johansen et al. (2006) Lead shot from hunting as a source of lead in human blood. Env Pol 142(1):93-97.
Meltzer et al. (2013) Consumption of lead-shot cervid meat and blood lead concentrations in a group of adult Norwegians. Env Res 127:29-39
Hunt et al. (2009) Lead bullet fragments in vension from rifle-killed deer: potential for human dietary exposure. PLoS One 4(4):e5330.
Tsuji et al. (2008) The identification of lead ammunition as a source of lead exposure in First Nations: The use of lead isotope ratios. Sci Tot Env 393:291-298.
Levesque et al. (2003) Monitoring of umbilical cord blood lead levels and sources assessment among the Inuit. Occup Env Med 60(9)
Bellinger et al. (2013) Health risks from lead-based ammunition in the environment. Env Health Prosp 121(6):a178-a179.
If that is pure myth then why don't lead core bullets maintain 100% of their weight?
I went to the Barnes TTSX 140 grain for my 7 mm '08 this past year. Took three deer with it, all. Head neck intersection shots farthest was 225 yd! I went to that bullet feeling that being me 59 years old. I might see in my lifetime that lead bullets are going to be outlawed in Pennsylvania at some point.... Not sure of that but and I rebuilt my 708 which is a Thompson center venture. And I'm getting 1/2-inch groups at 2,850 ft per second!
Thank you for this break down. What happens at the other side of the hunting range. If your in tight cover (less than 25 yards) with a moose or brown bear how does the copper preform. Can we expect similar stopping power to lead out of the same gun
If anything, copper bullets may provide more "stopping power" than lead-core bullets due to penetration! Copper, controlled expansion bullets often penetrate much, MUCH deeper than your average lead core bullet, therefore you may find increased lethality.
@@BackcountryHuntingPodcast awesome thank you
I wish that I had found this video before ordering mono-copper bullets for several of my big game rifles. In the areas where I hunt I need the animals to drop and not run down the mountain side. It sounds like the copper kills slower than lead core and that will be a problem for me.
@@darinbarber2922 Well, not quite... With good shot placement, and within reasonable hunting ranges, monometals will kill just as easily as lead bullets. It's when your shots land on the edge or outside of the vital zone that you're more likely to have a long tracking job.
Good One Enjoyed.
Great content!
Idk if you said but yea it seems like you need to clean the barrel when switching to mono. I was shooting hornady eldx factory 338 win mag. Not so great. Tested Barnes ttsx hand loads. All over the place. Cleaned the barrel then I got 1 moa
Good information, thanks.
Rats wish had seen earlier.. Will have watched all of this later.. Sounds Interesting
The barns ttsx is wonderful in the now extinct 338 rcm. 160 gr at 2950 out of a 20 inch barrel makes a wonderful all around rifle suitable for all north american game.
Don't call It extint. Blaser has revived it. It's called the 8,5x55 blaser and the 160 grain ttsx is one of the offered loads. It seems to be one hell of an all rounder.
OK... let's explore high-technology bullets. None seem to want to talk about. Specifically, DRT bullets. Supposedly, they can shoot through glass, brick, and bone. Then, encountering liquid, they disintegrate into a swirl of fine metallic powder, which is compressed inside the jacket. They are supposed to be accurate and won't ricochet from one animal to another. They do not spoil meat. That explosive cloud of powdered metal destroys all organs instantly, causing sudden blood pressure drops and quick kills. Here's where it gets interesting... even small cartridges loaded with DRT bullets kill big animals. It's like 1 shot and done! They have an older video, where a cow elk out there, dropped instantly to one DRT 243! Over the phone, they told me they shot a big bull elk at 600 yards, 1 shot with their 243 Win load! An African hunting guide says DRT bullets shot out of 223, kills all the plains game! I watched 223 DRT loads drop Oryx, and 1 shot a piece on a US ranch! Just the other day, I called DRT and was told the 6.5 Creedmoor dropped bigger animals than the elk and black bear effectiveness I inquired about! Think about this... I get a dinky accurate 6.5, and with DRT loads, I can drop all Western big game with 1 well placed shot, 400 to as they claim, 600 yards. If so, why shoot bigger cartridges? What if their technology really has changed the game? Sounds too good to be true. But what if it is. During my call, I surmised this tech is deliberately suppressed. They agreed. That hunters don't get the technology and fear exploding bullets. That the traditional bullet industry fears what DRT brings to the table? I intend to find out. I have always favored using big guns... 300 Weatherby, 300 RUM, 338Win, 375 Ruger. But dang, I just may buy a Springfield Waypoint in 6.5 Creedmoor and go after Black Bear and Elk with the DRT load! Gun writers seem to poh- poh DRT? I ask that you try DRT, as it would be interesting to hear about your results😊
The best monometal I have tried is the Lapua Naturalis, hands down.
It expands like a traditional mushroom. Used on 5 trips to Namibia.
When you were talking about the hydrodynamic shock expanding monometals do, youre referring to the same effect bullet engineers from federal mentioned of tearing damage inches away from the direct path of the bullet when impact velocities exceed ~2200 fps?
Excellent video thank you! I bought a 280ai in the covid days and was unable to find much of any 7mm bullets on the market. Have always been a accubond fan but finally found hammer were available. I loaded up some hammer hunter 143 grain bullets and the gun will shoot consistantly under .5 inch groups with them. Have only taken one deer so far with the rig but i am planning a moose hunt this fall. In your opinion are the hammer hunter 143 s a good option for me? I am shooting them at 3060fps with 4831sc powder?
I Believe the E Tip now does have a single wide groove . No ideal why they did ,as they group good.
When you talked of the performance of expanding monometals early on, isnt that the same case for expanding bonded lead core soft points? Around 13:05 it started to get a little vague if you were talking about bonded lead core stuff like federal fusion, or fragmenting match rounds with a lead core
I am studying all these bullet type videos to benefit all of us in those 3 or 4 short, slow, straight walled states, or thick wooded slow short ranged rifles. The monolithic or monometal bullets are uncertain to me because it seems that every "expert " tells us the monumetal has to be 2000 fps +/- . So which of these do you suggest, if any? As of right now it seems that my only option is a bonded or cup & core. What ya'll thinkin?
For hunting in those states that you mentioned, at the ranges that you’ll be shooting and those cartridges are really effective, a cup and core bullet will be just fine.
48 min mark Clean barrel section. ??? In your experience with those you have tested.. Have you noticed any difference between the Alloys Mono n Regular Cup n Core.ie shooting both.
I do know your most correct on the all Copper Clean n dont mix. Cant say for sure on the Alloys yet. Ie Win Deer Season n Copper Impact. ETIPS As well. Carry on.
Question. Planning a float moose hunt. Have a 358 Norma mag with 250 Partitions that shoots crazy well. Love the monos in my 06 for elk. Would you bother to work up a mono load for the 358 or stick with the old Noslers.
The Noslers would be terrific!
Thanks for the reply.
Can you do a video on the Nosler Partition?
Check out Twenty Nine Bullets, Umberto and his team are doing a great job on monolithic bullets
Have you seen accuracy issues shooting copper and lead bullets? I have a tikka .308 shooting .5 moa with the 150ttsx. I’m afraid to shoot any lead through the gun with the copper shooting so well. I appreciate your thoughts!
I'm not Joseph, but I have personal experience with my rifles. For my rifles to shoot mono-metal, I had to clean out all the Lead jacketed copper out. I can still shoot the jacketed bullets fairly accurately after the mono-metal. However, you must clean out all the copper again to get back to the accuracy for the mono-metal.
Barnes TTSX are 100% copper. Other makers use 100% copper. Some, like Hornady and Nosler, use gilding metal for their monometal and jacketed bullets, which is 95% copper, with the balance being zinc. Swapping back and forth between gilding metal and pure copper CAN cause accuracy and fouling issues to arise. The solution if this problem is encountered is to thoroughly remove the copper fouling from the bore before swapping between copper and gilding metal.
Copper weighs 79% that of lead. Conversely, your copper bullet will be 25% larger than a solid lead bullet and closer to a jacketed bullet depending on how thick the jacket is.
What do you think of the Cutting Edge bullets?
I like 'em!
You need to expand on the euro monos.. Norma has a 2 one of which is Tin Core. Kinda like Barnes MRX only " green " bullet with on game use. S&B has 2 TXRG Engery Blue Spitzer n a New Edge which is like there SPCE.. Shot the 180gr 06 still trying to get my hands on 7x57 n 8x57 n 06 165 piggy bank hasn't allowed yet. N Hornady has a European line with a slightly different CX
Would like get hands on them in 7x57 8x57 or just the bullets.
Barnes makes the matchburner that's lead core. Good bullets so far. What I have shot from them.
Yep, and Barnes also makes the lead-core Original, which I'm partial to in my .45-90 lever-action. But the company's primary focus is monometal bullets! Great projectiles, all of them.
@@BackcountryHuntingPodcast also. What's your thoughts on the factory Barnes 280 Ackley ammo ?? I am sort of interested in trying g some. But my shots are close normally. In the north east . So I probably do not need the high BC stuff. But am curious about how it does.
only 480p looks a little blury.
interesting topic 👍
My favorite monometal is cast lead.
Hallo Benedikt aus der Schweiz
Vergleich doch einmal "Messing-Führbandgeschosse" mit Kupferprojektilen. Lutz Möller war ein Pionier in der Entwicklung heuter bieten verschiedene Hersteller wie "Sax Bullet" "GM Geschossmanufaktur" oder "Fox Bullet" kontrolliert zerlegende Geschosse ...
Fox Classic Hunter sind keine Zerleger sondern Deformierer und auch nicht aus Messing das LOS HT fällt mir da noch ein als Zerleger aus Messing ähnlich wie das SAX und die Lutz Möller Dinger 😉 Gruß aus Deutschland
Ich mag Deformierer wie Barnes TTSX, Fox Classic Hunter, Hornady CX und ECX lieber als Zerleger
... a bullet I have hunted with that drops big game like a abattoir sledge hammer and doesn't break the bank is the Winchester Power Max Bonded bullet ... don't see much of it on store shelves these days
Interesting
Great video. Would like to point out one issues though. Heavy metal poisoning if passed down from the mother. Having a child with special needs, you would be astonished at the amount of heavy metals that are found in these children’s bodies. Most HM are nearly impossible to detox without a specialist and medical assistance. Our society is already extremely toxic and it is only getting worse, so try and keep the lead away from your food if possible.
absolutely correct. TSX/TTSX, RWS Evo, Federal lead-free power-shok, Nosler expansion tip, ELD-X, Naturalis, etc. and steel shot for waterfowl/upland work great. Great penetration, great expansion, exit hole. Doesn't make any sense to use lead unless you're not eating the meat. And aside from some invasives, CWD-infected deer/elk/moose and old Brown bear boars, you should be eating the meat.
2nd 3rd or 4th shot. Keep shooting till there down. Not sure if you hunt elk and larger game.
Not sure you know who you're chastizing. He even pointed out that you want to try to get a few shots into the animal, but if it disappears at the shot, you give it some time and then go track it.
I have been forced to use them for years now Calif. I don't like them at all. they almost all pass through without good expansion I've used many different brands. When out of state hunting, I always use normal bullets of many brands and types.
Bonded lead core are not going anywhere. And the partitions style bullets are also not going anywhere, except on the top of the pile. We need to loose these rebrand target bullets that some guys hunt with. Silly
👍 Nosler Partition & Accubond, Norma Bondstrike & Oryx, Speer Hotcore & Gold Dot or even cheap as Dirt Cup & Core Hornady SST all work great on Game or Monolith like Barnes TTSX all of them can be as Accurate then Targetloads ......... i dont know why anybody would Hunt with Target Bullets that are simply not build for the Job ok on Varmints or Crows ... with Sierra SMK or TMK or normal Hornady BTHP but even there Sierra Blitzking and Hornady VMax are better
@@lenzadlbergerdon’t forget to add that terminal ascent from federal, we’ve only taken 1 deer with it so far and unsurprisingly it was a clean pass through at 20 yards. Held together, didn’t find any chucks left behind. Was in a 6.5 cm, and they shoot fabulous through that cheap savage 110.
Some would argue that the overbuilt bullets advertised for "hunting" are less humane and built for unnecessary penetration where there are more humane but less conventional options
@NorthRiverGuide well that's just silly. 2holes are always better then 1. Might have to chase it 100yards or so but bleeding out both sides makes that easy. I've lost animals w rapid expanding bullets. I've never lost one with partitions, or terminal accents. That tells me all I need to know!
@REDNECKROOTS I'm not at all saying I'm getting only one hole, the heavy for calibre bullets that I use are more lightly constructed than bullets built for hunting and the animals aren't stopping them. They go in, create a wider permanent wound cavity than controlled expansion bullets through the vitals then exit. Even the black bear boar I recently harvested had a quartering away passthrough with a 73gr eld match shot out of 223rem. I don't think you realize how unnecessarily overbuilt those "hunting" bullets are
... lots of marketing gimmicks like inflated MVs & inflated BCs ... what else is new??
Lead core bullets kill faster due to fragmentation, like JVB said. This video is only interesting if you hunt in CA.
Not necessarily true, I am a high shoulder with most larger game.
Monolith Bullets have their place they work if used correctly dont go for the same weightclass then traditionel Leadcore go light for Caliber and as fast as possible speed kills with Copper Bullets and give you the Results you want, i use 130gr in 308 and 123gr in 6.5, 120 in 7x57R and 140 in 7x64, i never lost a Animal with these mostly Barnes TTSX and i go for behind the Shoulder Heart so lower 1/3 of the Game i shoot yes most of the Times they run 20-30meter but then they drop, in rare instances the get 50-80m and my dog is happy to get some Work to do as well but this also happend to me with Leadcore Bonded like Nosler Partition or Norma Oryx
"mono -metal bullets" in this case, couldn't we just go with "copper"? I made it half way through, but between monometalbullets over and over, and the information strays so far from what I learn from Ron Spomer Outdoors, its just all over the place
...DOES ANYONE MAKE A "BONDED" LEAD FREE (COPPER & TIN) BULLET??!!
They're not bonded, and not a centerfire cartridge, but Winchester actually just introduced a lead-free, jacketed rimfire cartridge called the .21 Sharp. It's pretty cool!
Mono bullets are not the future. The terminal accent style projectile is the future. Bonded front half. Solid shank. That's the future
You can stay with what you like but since 1978 I have been a one profession of guiding hunters in Alaska and the Pacific NW.
The Barns TSX - TTSX - LRX has proven to me and clients to be the number one killer of big game hands down no other bullets kill as fast and as sure as the Barns bullets.
I am sure you have very little experiences with shooting game from deer or larger animals to know the differences how bullets kill.
In a world without legal restrictions that might be true. But the govt wants lead out of bullets. In a regulated future monos are the future. Having said that, I love a nosler bonded with a solid rear shank for SD loads
It doesn’t matter if you like them or not, they absolutely are part of the future. I run everything from old hard cast lead to solid coppers, it all works great if used appropriately. I do agree the terminal ascent is a fabulous projectile.
@@dalebenson6859 I just seen too many horror shows w monolithic projectiles. They just don't open up for crap at longer then 300 yard shots. Long distance has become the rage and I can't get behind a bullet / rifle combo that if used past 300 it will likely spell a wounded animal and or a long chase. I get that they work most the time for most people. Especially at close range. I'm a close range guy because I respect the animals too much to risk a long shot. Most guys today are taking longer n longer shots and with monos it really drops the chance for a fast kill. Lead just opens up much easier. Even bonded lead
@@jaydunbar7538 they will def be available. But it's not the future. Like I said and I stand by it. The federal terminal accent style projectile with a bonded lead front half and a solid rear shank. That is what I see a lot of companies offering in the future after the patient expires. Offers the best of both worlds in one. We gonna see 🙈🙉 eventually 😉
You kept talking about the bullets and as you can see. All you could see was there was some type bullet but nothing you were talking about. What a waste of time.
Mono bullets are excellent for increasing your wounded animal tracking skills.😬
I appreciate all types of hunting and every hunter , however , if you keep ur hunting under 350-400 yards your velocity based bullets should not matter much. I don't care where you hunt...if u have to shoot past 600 yards...u ain't huntin....your shooting for bragging rights. And why are we shooting animals from the ass forwards ?
While I won’t take that shot, it’s a matter of filling the tag or not. You don’t always get a perfect shot and it’s best to be ready to take any shot you may need to take. The best shot you get on a expensive hunt you traveled across the world for may be ass first, so it’s up to you if you want to take the shot you got or go home empty handed.
Absolutely right on !! 👍👍😀
@jaydunbar7538 I don't disagree with you brother however there is a lot that could go wrong before that bullet hits the boiler room....I would feel horrible crippling a exotic animal ...cheers
Depends on the caliber and barrel length. A lot of 308 with 18-20in barrels start reach some monolithic bullets minimum effective speed around 300 yards. While I personally never take a shot past 300 yards the minimum effective speed expansion is far less than ideal speeds. For deer this isn't really a concern but with elk and moose it starts to be another variable that you must take into account.
IF YOU USE STEEL PELLET SHOTGUN SHELLS,... YOU CAN EASILY WAND THE MEAT WITH ANY "PINPOINT METAL DETECTOR" TO FIND SMALL FRAGMENTS, AND AVOID INGESTING ANY OF THEM.