It takes education, knowledge, experience, professionalism, integrity, honesty, dedication, attention to minute details, and above all , patience, to create homemade tools.
Thanks for the video and for showing us how you use your measuring devises especially the circular inside and outside measurements. Why didn't I think of that? These videos should be national treasures...
Is it weird that I want to smell his shop? One of my first jobs was a hardware store/lumber yard that did some mill work, hence the name scott millwork and the smell of the shop and the indoor area where we stored moulding and clear pine... 🥴 heavenly
I think the folks that left the thumbs down, they are jealous that they DON'T have the craftsmanship skills to be able to perform this kind of work! Great video, Dave.
There are FEW other things I enjoy MORE on UA-cam than your videos...! Being a non-woodworker you content is instructional and embraces the deep history of the items be made....thanks for your efforts!
Thanks You for posting your amazing work here for all of us to enjoy. I enjoyed the history lesson and watching the rebuild. Guess I will have to start paying more attention all those wagon wheels I see here in peoples yards here in Nebraska !
Hello Sir It a pleasure to see how you build this hubs You Show in Detail all the fidely measurements thats nececary that the wheels Run right You saved a pair of wheels and the Art to build it Thanks for that all Greetings from Germany Yours Frank
@Randy Bingham Dave measured the metal at specific points and then used a traveler to measure the circumference at that point. He then laid it onto the wood. Basically he cut steps into the wood and then turned the taper to blend one step into the next. Hope this helps.
What gets me about watching this gentleman work is how easy he does true precision work, almost off hand, in a way. Something like that takes a lifetime of practice. WELL DONE!!!
who ever does the setup, filming and editing does an excellent job of getting details and various angles to show detail of every step but also short enough not to get overly long. really enjoy all the various step and attention to every detail. being a older person, I had the privilege to ride in a old mule drawn wagon that my grandfather owned and used on his farm 1/2 away. father would get it an haul all the plows so he could make a large garden so we would have food through the winter.
Dave!! you do beautiful work on helping to restore these old vehicles. I had a 1923 ford model tt and I restored it. The truck I had was a bottlers delivery with c cab body. I'm new to your channel and I really enjoy watching your videos
I love seeing that old machinery in operation almost a much as I love watching Dave's craftsmanship. The only bad thing about this video is the fact that once it is over I have to wait an entire week for the next one! Once again, Dave: thank you so much for allowing us along on your journey & thanks for the history lesson too!
392 channels tv, and he entire internet at my disposal, and I’d rather watch Dave and his handiwork any day. You make something that is not easy look, well, not that easy, but one of the last guys who has these skills. Thanks!
I always thought I was pretty good at wood and metal in the shop but watching you tells me... I should go back to school... at 74 yrs old. In other words YOU ARE GOOD! and not just in the shop but also as a video producer! You are the best! Thank you!
I watched another video filmed in the 70s of a wheelwright making a wheel, there was no comparison, if parts were within and 1/8" it was close enough, he'd force it in, Dave's wheels are built like fine furniture.
Great video as all was. I do have to admit it kills me to see a metal lathe turn wood. But for some reason it's not that bad when you do it. Lol Looking forward to seeing the rest of the Winona wheels build. Thank you Dave and your wife for all the work to put out the videos.
@@bruceharvey8810 because if you turn wood. The worst thing you can do is oil the ways because that makes wood chips stick. So you have more metal on metal contact. Witch introduces faster wear. Just my opinion. But I'm a metal worker.
Dave, your videos have been one of the highlights of my lockdown drudgery. Thank you for the history. Thank you for the craftsmanship. Thank you for the reassurance that someplace normalcy carries on...
Dave I have been watching you for over two years now. I have gone out in my garage and started doing wood projects with some old hand tools that I have had for years some handed down to me from my father-in-law. Some of the things that I have built are only gifts I give to my wife or daughter and friends. Have made so many boneheaded mistakes in so many of my projects that makes me just wonder why I want to do this. Old saying "It does keep me off the streets" comes to mind. But you sir are why I started doing this. I am almost 70 now. Been retires almost 10 years and playing golf, traveling here and there just wasn't cutting it any more. Working on something that can be past down really has its rewards. Bringing out skills that have been hidden for awhile is an added bonus. Watching you what seems to be an effortless movement around your shop really is inspiring. The skills you present are so easy to mimic, for if one is able to grasp just a little of those skills you have and try to apply them they are going to be onto something really rewarding. I will never be able to get to your skill level but you are responsible for me getting off my duff and making me see things in myself that I forgot. Thank you Dave.
There's lots of things in Dave's videos that make me chuckle down real deep. One of the biggest though is seeing him working working Working very diligently, and his mouth is closed. I work with so many people that can't keep their mouth Shut while working (or not working) that it's just a "blessing to my soul" seeing someone get Serious Work Done without talking so much. Keep up the Quality Work (Craftsmanship), Dave! Love it! So glad that you let us see it!
You are such a highly skilled gentleman. I am amazed and mesmerized every time I watch your channel which is every night. You make it all look so easy yet it’s not. You are truly gifted! Love your channel!
I am just mesmerized every time I watch you bring back to working order, something that would be lost to time, had you not been around to save it. With time laps, it Does look like wagon wheel Wizardry. Seeing that carpenter ant get run out of his home, reminded me of that Old song about a farmer and his Boll weevil problems. Thanks Dave for the good times today, I sure enjoy what you do. Looking forward to the rest of the project.
Excellent job Mr Engels.... always enjoy watching and looking forward to seeing the next video of building techniques used in the past times of old ... 👍👌😊😊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊
+EngelsCoachShop: As is the usual, Dave displays his superlative skills in the pursuit of preservation of the wheelwright's trade. Truly *_amazing_* demonstrations of the necessary skills! Dave has them all and then some, truth be told. Could watch him work for hours, *_never_* being bored... As always, a *BIG* 👍🏻. And once again, another incontrovertibly deserved *_exceptionally well done_* !
Wow. I'd have been tempted to scan those profiles and then use a CNC lathe. Much more interesting and true-to-life to do it old school with the home made traveller wheels and the tape measure! Thanks for sharing.
Buenos días. Cómo me gustaría poder visitarlo por una semana y poder ver su trabajo y disfrutar de admirar sus talentosas habilidades y ver el resultado de su trabajo en una pieza única, una obra artística y bella. Reciba un saludo desde México.
Beautiful Job.... Everytime I see you use the mortising machine, i remember your video where you were modifying the new machine, It works beautiful... It must work for your needs, not the factory's assumed needs. Excellent
Excellent as usual and a super simple fixture for pressing out the old hub. Just a respectful FYI. I too pronounced Winona with a long "i" until I attended college there in the early 60s and was promptly informed it is pronounced with a a short "i". :-)
You sir are a Master Craftsman at a vanished art! I admire your perfectionism in recreating the history of other Masters long gone! And I can watch your craftsmanship with great respect and admiration because you can truly see your dedication and skill from even the way that you give the history and background on the wheels that you build!
Enjoyed the video Mr. Engel. It is amazing to watch you work. You do very precise work. Thanks for taking the time to produce the video. Y'all stay well and God bless.
Gorgeous work! Fascinating, I cannot imagine what the shop in 1879 that made these wheels was like. Must have had some incredible craftsmen and clever approaches, no electricity, no hydraulic press, had to be hi-tech for 1879. And the cast iron parts themselves represent very sophisticated casting work.
For me, this was one of the most satisfying projects you've made. From the glue up, initial shaping, detailed shaping, dished/angled mortises and a host of other items not filmed, I truly appreciate your skills and willingness to share those skills with us out here in the UA-cam-iverse.
Thanks Dave for another great video. I love all your shop equipment. Even though a lot of it is older it still does the job and of course having a skilled professional operating it helps. You are obviously someone who enjoys what he does and I also like your explanations about the items you work on. Be safe!!
Always a fascinating insight into a master craftsman’s art. I’ve watched dozens of these videos and I will watch more. It’s nice to see machine tools that have no computers and the knowledge and experience to create each piece using basic measuring is a joy to see.
I am sure you have heard this many times before... but dang what you do is amazing... some will say my wood working is amazing... but I am no where close too you Sir...
Loved it Dave. I could watch you all day, and visualise where I could cock it up. Oh I can do most stuff, but I have faults, and at nearly 70 I'm aware where I'm likely to go wrong. For example, I can become focussed on one thing to the extent that I overlook something else. I love watching you though Dave. Take care friend.
The craftsmanship is extraordinary and I always appreciate the history lesson. I laughed out loud when I saw the "environmentally friendly" way you dealt with the bug.
I can't begin to express my admiration and wonder at the work you do. You show the precision of a top machinist, the woodworking skills of the best type of artisan and a top notch blacksmith as well. If I were 18 I would do almost anything to be your apprentice for subsistence only for a measly couple of years to absorb a bit of your mastery of the art.
I really enjoy seeing some of your brilliant home made tools in action, (Indexing jig for the spoke drilling operation) I noticed also you have a big glorious old wood stove in the shop. I hope his winter we get to see a little video of you using it to heat the place. Always a pleasure watching you work. I cant even say why i find this so fascinating and calming. It just warms my heart to see these kinda of things still valued and appreciated. I have a love for the old technology and the craftsmanship of those times as well as clever ways people like you create to get the work done today. Thanks for taking the time to do these videos documenting your great work on top of all the work it takes to do what you do so well. Cheers!
Really enjoy your videos watching here in the UK, but being an retired engineer and avid modeller, I enjoy the design of your jigs and specialised equipment and chuckled @ 16.38. Nothing like a fresh rubber band to bring the project together!.. Cheers from another Dave.. :)
![What's in the box?! 1890s Safe [Restoration]](http://i.ytimg.com/vi/kugqGatwLDY/mqdefault.jpg)
It takes education, knowledge, experience, professionalism, integrity, honesty, dedication, attention to minute details, and above all , patience, to create homemade tools.
Thank you for this vidio sir.
I remember the days of my fathers legacy. That was his job before. Watching here in Philippines
The most interesting and outstanding channel on UA-cam! Long live EnglesCouchShop!
Dave, I already saw this video thousand times. Every time I find it wonderful.
Thanks for the video and for showing us how you use your measuring devises especially the circular inside and outside measurements. Why didn't I think of that? These videos should be national treasures...
Is it weird that I want to smell his shop? One of my first jobs was a hardware store/lumber yard that did some mill work, hence the name scott millwork and the smell of the shop and the indoor area where we stored moulding and clear pine... 🥴 heavenly
Not just skill with hand and mechanical tools; but a real empathy with the materials you work with. But above all else, you Sir, are an Artist!
I think the folks that left the thumbs down, they are jealous that they DON'T have the craftsmanship skills to be able to perform this kind of work! Great video, Dave.
Thank you so much to keep this amazing history passing through the time.
Minnesota is where i was born.
Good to see another wagon company wheel.
God Bless.
There are FEW other things I enjoy MORE on UA-cam than your videos...! Being a non-woodworker you content is instructional and embraces the deep history of the items be made....thanks for your efforts!
Nicely done. It is always a pleasure to watch a true craftsman.
Got great respect for the metrics, quality of wood , craftsmanship, and video editing.
Hi, I love your work. Nothing boat related, but fantastic to see this trade still alive and well, thanks to men like you.
That was a fantastic video thank you for taking the time
You do such good work. Thank you for your work to keep this trade alive.
Nice work Dave, from Sartell,. Minnesota. Keep on smiling.
Interesting wheel design and different method of constructing it. We are in Libby, MT working part time for the Woodland RV Park 👍👍
You truly are an amazing craftsman and the opportunity of watching you do your magic is a much appreciated delight! Thank you for sharing with us!...
If this was the only channel, I'd be perfectly happy watching this extraordinary craftsman over and over and...
Thanks You for posting your amazing work here for all of us to enjoy. I enjoyed the history lesson and watching the rebuild. Guess I will have to start paying more attention all those wagon wheels I see here in peoples yards here in Nebraska !
Dave- Thanks so much for the videos. I continue to enjoy them.
Such a humbling experience to watch you do your magic....
Hello Sir
It a pleasure to see how you build this hubs
You Show in Detail all the fidely measurements thats nececary that the wheels Run right
You saved a pair of wheels and the Art to build it
Thanks for that all
Greetings from Germany
Yours Frank
Thanks Frank.
Amazing to watch you match the contours on those new hub centers to the existing outer metal parts.
@Randy Bingham Dave measured the metal at specific points and then used a traveler to measure the circumference at that point. He then laid it onto the wood. Basically he cut steps into the wood and then turned the taper to blend one step into the next. Hope this helps.
What gets me about watching this gentleman work is how easy he does true precision work, almost off hand, in a way. Something like that takes a lifetime of practice. WELL DONE!!!
No words describe the quality work you put into your projects. Thanks Mr. Engels
who ever does the setup, filming and editing does an excellent job of getting details and various angles to show detail of every step but also short enough not to get overly long. really enjoy all the various step and attention to every detail. being a older person, I had the privilege to ride in a old mule drawn wagon that my grandfather owned and used on his farm 1/2 away. father would get it an haul all the plows so he could make a large garden so we would have food through the winter.
Absolutely some of the best videos on you tube. Thank you Dave.
Dave, You say thanks for watching, I say thanks for sharing your craft and your skill with us every week!
The essence of artisanry. You have superb skills.
In your films you can see 100% that "old" craftsmanship never dies ... respect ...
Everytime I see Dave go over to his sand blaster I think of Hand Tool Rescue and it makes me chuckle .
Thumbs up!
I'm almost a little disappointed that he doesn't slam his forehead against the glass. ^^
Dave!! you do beautiful work on helping to restore these old vehicles. I had a 1923 ford model tt and I restored it. The truck I had was a bottlers delivery with c cab body. I'm new to your channel and I really enjoy watching your videos
I love seeing that old machinery in operation almost a much as I love watching Dave's craftsmanship. The only bad thing about this video is the fact that once it is over I have to wait an entire week for the next one! Once again, Dave: thank you so much for allowing us along on your journey & thanks for the history lesson too!
392 channels tv, and he entire internet at my disposal, and I’d rather watch Dave and his handiwork any day. You make something that is not easy look, well, not that easy, but one of the last guys who has these skills. Thanks!
A craftsman and an artist ... thanks for sharing!
I always thought I was pretty good at wood and metal in the shop but watching you tells me... I should go back to school... at 74 yrs old. In other words YOU ARE GOOD! and not just in the shop but also as a video producer! You are the best! Thank you!
I watched another video filmed in the 70s of a wheelwright making a wheel, there was no comparison, if parts were within and 1/8" it was close enough, he'd force it in, Dave's wheels are built like fine furniture.
C Smith I could not agree with more you are right....
Mostra o eicho e ferro com ferro
@@bigredc222 }]o woodwork in fwOotdw
@@juergenschroder5793 fwOotdw ???
Always! Impressed with your work. Makes a lowly woodworker humble.
Great video as all was.
I do have to admit it kills me to see a metal lathe turn wood. But for some reason it's not that bad when you do it. Lol
Looking forward to seeing the rest of the Winona wheels build.
Thank you Dave and your wife for all the work to put out the videos.
Why does it "kill" you to see a metal cutting lathe used on wood?
@@bruceharvey8810 because if you turn wood. The worst thing you can do is oil the ways because that makes wood chips stick. So you have more metal on metal contact. Witch introduces faster wear. Just my opinion. But I'm a metal worker.
Dave, your videos have been one of the highlights of my lockdown drudgery. Thank you for the history. Thank you for the craftsmanship. Thank you for the reassurance that someplace normalcy carries on...
Thanks. Hang in there. Some sort of normality will return.
This deserves a million views.
Dave I have been watching you for over two years now. I have gone out in my garage and started doing wood projects with some old hand tools that I have had for years some handed down to me from my father-in-law. Some of the things that I have built are only gifts I give to my wife or daughter and friends. Have made so many boneheaded mistakes in so many of my projects that makes me just wonder why I want to do this. Old saying "It does keep me off the streets" comes to mind. But you sir are why I started doing this. I am almost 70 now. Been retires almost 10 years and playing golf, traveling here and there just wasn't cutting it any more. Working on something that can be past down really has its rewards. Bringing out skills that have been hidden for awhile is an added bonus.
Watching you what seems to be an effortless movement around your shop really is inspiring. The skills you present are so easy to mimic, for if one is able to grasp just a little of those skills you have and try to apply them they are going to be onto something really rewarding.
I will never be able to get to your skill level but you are responsible for me getting off my duff and making me see things in myself that I forgot. Thank you Dave.
That is incredibly satisfying to hear! Thank you for sharing and your doing. Let the creativity continue!
It is a great pleasure to watch you work!
Your breadth of knowledge continues to amaze me. Fascinating content. Thank you.
I like that casual hammering of the bug.
I am totally amazed at your precision of work and the ease with which you do it. Thank you for sharing.
Mr. Engels so impressive to watch a master craftsman work.
What a knowledge and genuine craftmanship, its amazing...👍👍very satisfying to watch
Always enjoy watching your videos. A true craftsman.
Hi Dave, Thanks for inviting us into your workshop! Stay Healthy and Safe.....
Beautifully done sir pure craftsmanship
"Only one bug was injured in the making of this video" pfft! always pleasure to watch Dave!
Dave, when you smacked that bug with the hammer I burst out laughing. Thanks for the chuckle. As always, great vid!
There's lots of things in Dave's videos that make me chuckle down real deep. One of the biggest though is seeing him working working Working very diligently, and his mouth is closed. I work with so many people that can't keep their mouth Shut while working (or not working) that it's just a "blessing to my soul" seeing someone get Serious Work Done without talking so much. Keep up the Quality Work (Craftsmanship), Dave! Love it! So glad that you let us see it!
You are such a highly skilled gentleman. I am amazed and mesmerized every time I watch your channel which is every night. You make it all look so easy yet it’s not. You are truly gifted! Love your channel!
I am just mesmerized every time I watch you bring back to working order, something that would be lost to time, had you not been around to save it. With time laps, it Does look like wagon wheel Wizardry. Seeing that carpenter ant get run out of his home, reminded me of that Old song about a farmer and his Boll weevil problems. Thanks Dave for the good times today, I sure enjoy what you do. Looking forward to the rest of the project.
Is that LeRoy?
Excellent job Mr Engels.... always enjoy watching and looking forward to seeing the next video of building techniques used in the past times of old ... 👍👌😊😊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊🕊
Once again sir, I really appreciate your skill and all around craftsmanship. Thank you for sharing!
Wow. More than 100 years since the wood in that hub has seen daylight. Beautiful work as always!
Dave , I liked the way you used the boring bar for a tool rest. I never tried that before, good idea. Ballpeen kills bugs dead !
The Winona wheel hub is clearly a durable long lasting design. Very impressive technique by the way.
+EngelsCoachShop: As is the usual, Dave displays his superlative skills in the pursuit of preservation of the wheelwright's trade. Truly *_amazing_* demonstrations of the necessary skills! Dave has them all and then some, truth be told. Could watch him work for hours, *_never_* being bored...
As always, a *BIG* 👍🏻. And once again, another incontrovertibly deserved *_exceptionally well done_* !
Wow. I'd have been tempted to scan those profiles and then use a CNC lathe. Much more interesting and true-to-life to do it old school with the home made traveller wheels and the tape measure! Thanks for sharing.
Buenos días.
Cómo me gustaría poder visitarlo por una semana y poder ver su trabajo y disfrutar de admirar sus talentosas habilidades y ver el resultado de su trabajo en una pieza única, una obra artística y bella.
Reciba un saludo desde México.
Beautiful Job.... Everytime I see you use the mortising machine, i remember your video where you were modifying the new machine, It works beautiful... It must work for your needs, not the factory's assumed needs. Excellent
Yes it turned out to very functional.
Excellent as usual and a super simple fixture for pressing out the old hub. Just a respectful FYI. I too pronounced Winona with a long "i" until I attended college there in the early 60s and was promptly informed it is pronounced with a a short "i". :-)
Yep, been educated on that also.
You sir are a Master Craftsman at a vanished art! I admire your perfectionism in recreating the history of other Masters long gone! And I can watch your craftsmanship with great respect and admiration because you can truly see your dedication and skill from even the way that you give the history and background on the wheels that you build!
Thank you. Stay safe
Fine workmanship....Thanks very much...!
Enjoyed the video Mr. Engel. It is amazing to watch you work. You do very precise work. Thanks for taking the time to produce the video. Y'all stay well and God bless.
Gorgeous work! Fascinating, I cannot imagine what the shop
in 1879 that made these wheels was like. Must have had some incredible
craftsmen and clever approaches, no electricity, no hydraulic press, had to be
hi-tech for 1879. And the cast iron parts themselves represent very sophisticated
casting work.
M Smith stay safe and keep making these great videos
Dave, your craftsmanship is truly magnificent.
Beautiful craftsmanship...as always! Thank you, I love your channel.
Watching you cut those tapers is like watching a logger with a battery powered reciprocating saw, but the end product is excellent as always.
Aways very enjoyable to watch a master at work.That hub mortising machine that you built sure comes in handy.
You make this look so effort less. Always a pleasure. Stay Safe!
For me, this was one of the most satisfying projects you've made. From the glue up, initial shaping, detailed shaping, dished/angled mortises and a host of other items not filmed, I truly appreciate your skills and willingness to share those skills with us out here in the UA-cam-iverse.
Just another great job, Thank you again for your videos Dave..
Love to see satisfaction on his face I restored a 1910 Buffalo steam roller I know what he is feeling great job
Thanks Dave for another great video. I love all your shop equipment. Even though a lot of it is older it still does the job and of course having a skilled professional operating it helps. You are obviously someone who enjoys what he does and I also like your explanations about the items you work on. Be safe!!
Like how the second one suddenly appears finished!
Just incredible! I cant wait to watch every Friday before i close my shop. You are a Treasure! Thank You
Always a fascinating insight into a master craftsman’s art. I’ve watched dozens of these videos and I will watch more. It’s nice to see machine tools that have no computers and the knowledge and experience to create each piece using basic measuring is a joy to see.
I am sure you have heard this many times before... but dang what you do is amazing... some will say my wood working is amazing... but I am no where close too you Sir...
I have painted hundreds of wheels with latex paint. I love it. I get to charge people to do this then I get the repair business.
Loved it Dave. I could watch you all day, and visualise where I could cock it up. Oh I can do most stuff, but I have faults, and at nearly 70 I'm aware where I'm likely to go wrong. For example, I can become focussed on one thing to the extent that I overlook something else. I love watching you though Dave. Take care friend.
I got a good laugh when you hammered the bug, your videos are relaxing to watch and very informative, keep em coming!
The craftsmanship is extraordinary and I always appreciate the history lesson. I laughed out loud when I saw the "environmentally friendly" way you dealt with the bug.
I can't begin to express my admiration and wonder at the work you do. You show the precision of a top machinist, the woodworking skills of the best type of artisan and a top notch blacksmith as well. If I were 18 I would do almost anything to be your apprentice for subsistence only for a measly couple of years to absorb a bit of your mastery of the art.
Dave, your workmanship is incredible. Truly a pleasure to see an artist/craftsman at work. God bless, have a great weekend
I would be pretty pleased with myself if I could manage 10% of what you achieve in a day. Brilliant workmanship
I really enjoy seeing some of your brilliant home made tools in action, (Indexing jig for the spoke drilling operation)
I noticed also you have a big glorious old wood stove in the shop. I hope his winter we get to see a little video of you using it to heat the place.
Always a pleasure watching you work. I cant even say why i find this so fascinating and calming.
It just warms my heart to see these kinda of things still valued and appreciated.
I have a love for the old technology and the craftsmanship of those times as well as clever ways people like you create to get the work done today.
Thanks for taking the time to do these videos documenting your great work on top of all the work it takes to do what you do so well.
Cheers!
Thanks Chuck. Yes that stove burns all winter.
Informative and watchable as ever. Thanks Dave.
Great job. Keep those skills alive.
ur a true artist keep em comeing
Hi Dave, as ever an amazing display of skill and craftsmanship.
Really enjoy your videos watching here in the UK, but being an retired engineer and avid modeller, I enjoy the design of your jigs and specialised equipment and chuckled @ 16.38. Nothing like a fresh rubber band to bring the project together!.. Cheers from another Dave.. :)
Thanks Dave. Pretty simple minded huh.
Awesome job Dave, excellent craftsmanship at it’s finest for sure. Thanks for sharing your talents with us. Fred.
This must be a labor of love. Because at your age I would have already retired.
Excellent work 👍