No I had the dealer do it I have premium 2000 and it covered it other wise it’s about $1500 The problem did come back but this time it was range switch, I had the gaskets replaced and now it’s fine dealer told me the range switch activates between 6th and 7 th gear and I had an air leak in it. Try that first it’s cheaper and the symptoms are very similar as the split pin bushings
Hi Aleks same problem with my DT12 , I contact freightliner dealer and I told them about ( range switch gasket) they didn’t recognize what I’m talking about, so please can you reply Part number which fixed the air leak Thank you
EM T Sorry for the late reply, I don’t have the receipts with me right now. The range switch is what switches the transmission from low gears to high gears. I was told there’s a gasket there that leaks out air and then it has a hard time switching between the too. Maybe it’s a o ring I’ll check receipt when I get home from my trip
Thank you for respond, I changed split bushing shift , clutch, clutch cylinder,back seal,clutch bearing,with all O rings on the area , still problem not solved after $7300 invoice, I showed them your video the don’t recognized with gasket or Oring, if you can save me with part number ASAP ( money bleeding continue) thank you
My transmission works perfectly fine. All the way to 6 gear once it's gonna hit 7 motor stalls out. Then it will recalculate back to fifth gear. And it will grab 68 ten, and 12. It will skip7911 but runs perfectly fine with no codes.
When servicing Detroit DT12 transmissions built before August 2016, make sure to change the steel split rod and bushing to eliminate a common complaint that the transmission will not go into gear after cold soak. The best time to address this problem is when the transmission is already out of the truck. This will help save significant service time and money in the long run.
You need to replace a pin with metal bushing. For that, you need to take a transmission out. Check Francisco Amaya channel for dd15 transmission splitter pin replacement. 2014-16 dt12 transmission has this problem. After 2016, they fixed it.
Having the same problem with automatic 10 speed Cummins engine I replaced the shefter and valve with no results Now they told me it might have a bad cpc and should be replaced!
i have an emergency question if you can help please … I have 2016 Cascadia with dt12 automatic transmission and my shift controller on the transmission is damaged … does that make my truck not to start at all ????????????????????? the guy who checked my truck with the computer said so but I kind of have a doubt as it doesn't make sense unless if you confirm i also changed the cpc4 and reprogrammed it to my vin and still doesn't start the truck and that's the only error it's showing just to mention ... the cpc was changed as it was stolen from my truck and i bought 2 used ones ... one is not programmed and it does crank my truck but won't throttle or put gear on .. and the second one is the programmed to my vin and doesn't crank the truck at all
Same problem take it to dealership they say air compressor bad I was laughing because it's brand new they don't know shit then I was do diagnosed on my own find out a air hose bad leak they just lazy or they know to charge u alot of money I hate dealership
So my truck shutoff in the mountains trying to climb. Reading these comments I believe I was in that same gear range 6-8th gear somewhere & the hsa ovrd light came on n truck shutoff. Then started truck 10mins later n light was gone n started driving. Then when taking an exit keep going to neutral engine brake turn on n off. Im at freightliner and there saying something about a cpc module.
@@mafaaz100 turn off power on your truck for 15-20 minute and then you may drive, there’s will be issues with harness and there may be air leak somewhere
I had to replace the split pin bushings in the transmission and it fixed the problem.
Did you do it yourself
No I had the dealer do it
I have premium 2000 and it covered it other wise it’s about $1500
The problem did come back but this time it was range switch, I had the gaskets replaced and now it’s fine dealer told me the range switch activates between 6th and 7 th gear and I had an air leak in it. Try that first it’s cheaper and the symptoms are very similar as the split pin bushings
Hi Aleks
same problem with my DT12 , I contact freightliner dealer and I told them about ( range switch gasket) they didn’t recognize what I’m talking about, so please can you reply Part number which fixed the air leak
Thank you
EM T
Sorry for the late reply, I don’t have the receipts with me right now. The range switch is what switches the transmission from low gears to high gears. I was told there’s a gasket there that leaks out air and then it has a hard time switching between the too. Maybe it’s a o ring
I’ll check receipt when I get home from my trip
Thank you for respond, I changed split bushing shift , clutch, clutch cylinder,back seal,clutch bearing,with all O rings on the area , still problem not solved after $7300 invoice, I showed them your video the don’t recognized with gasket or Oring, if you can save me with part number ASAP ( money bleeding continue)
thank you
My transmission works perfectly fine. All the way to 6 gear once it's gonna hit 7 motor stalls out. Then it will recalculate back to fifth gear. And it will grab 68 ten, and 12. It will skip7911 but runs perfectly fine with no codes.
Did you find problem I have same exact issue too now. ??
Did yall ever find the problem?
When servicing Detroit DT12 transmissions built before
August 2016, make sure to change the steel split rod and
bushing to eliminate a common complaint that the
transmission will not go into gear after cold soak. The best
time to address this problem is when the transmission is
already out of the truck. This will help save significant
service time and money in the long run.
I changed all that with no luck
Now they told me to replace the cpc
@@mmm12324bro I got same exactly issue with my cascadia 2016 . Tell me what fix this problem CPC or something else. ???
Guys that the clutch 100% , I just just had this and fixed it
Cómo lo arreglaste ???
What is the problem my tyranny is doing the same thing but it will to 5th and then it will run 6 8 10 n 12 it will not get 7 9 and 11it will skip them
At least ur is moving my 2015 cascadia just shows two dash at the beginning of ur video and it says shit inhabited
Mine is saying the same thing, how you get it fixed
I have my dd15 automatic transmission it always go on neutral blinking can anyone help me? Thankyou
My transmission does the same thing when it is cold. After the temperature gets 90F, it will shift without jumping out of gear.
Same problem I have with my truck did you find what is the issue ??
You need to replace a pin with metal bushing. For that, you need to take a transmission out. Check Francisco Amaya channel for dd15 transmission splitter pin replacement. 2014-16 dt12 transmission has this problem. After 2016, they fixed it.
thank you apperciate this, my truck do this on gear 6-7 and when truck is warmed up problem goes away.@@seanstarson7294
Bro I got same exact issue with my cascadia 2016 please tell me what fix the problem CPC or something else ???
Engine is cold and Need splint bushing replac…
Bro - when driving gear
Won’t shift from 2 to 3 and beyond. in my Frightliner any suggestions?
Where can I contact you please?
Turn the damn jake brake off
I had dealer program my jake brake not to turn on if speed is under 18mph even if the switch is on. There was no jake brake in video
I have the same exact problem it does not want to shift from gear 6 to 7, what was the cause and the fix?
Replace the TCM and then reset it to clear the codes.
Change Air dryer filter in transmission you will not see this problem, specially this happen in winter cold times.
Having the same problem with automatic 10 speed Cummins engine
I replaced the shefter and valve with no results
Now they told me it might have a bad cpc and should be replaced!
Hola Tengo ese mismo problema puedes decir cómo lo resolvió
Reemplace el tcm transmision computer module y después hágale reset para quitar los codigos
Yo bro how can I get a hold of you regarding this issue?
Did you fix your problem or have part numbers
i have an emergency question if you can help please … I have 2016 Cascadia with dt12 automatic transmission and my shift controller on the transmission is damaged … does that make my truck not to start at all ?????????????????????
the guy who checked my truck with the computer said so but I kind of have a doubt as it doesn't make sense unless if you confirm
i also changed the cpc4 and reprogrammed it to my vin and still doesn't start the truck and that's the only error it's showing
just to mention ... the cpc was changed as it was stolen from my truck and i bought 2 used ones ... one is not programmed and it does crank my truck but won't throttle or put gear on .. and the second one is the programmed to my vin and doesn't crank the truck at all
Wsp bro did you change the clutch switch sensor? Before you went that way ?
@@ilhommuminov708 I had to change the transmission shift controller and it worked
@@davidking665 thanks for sharing your experience bro the one on steering you talking about ? Or the one mounted on transmission?
@ilhommuminov708 the one mounted on transmission
@@davidking665 cool thanks bro
I have the same problem bro
what was the problem bro did you find it ?
Same problem take it to dealership they say air compressor bad I was laughing because it's brand new they don't know shit then I was do diagnosed on my own find out a air hose bad leak they just lazy or they know to charge u alot of money I hate dealership
Is it normal for the oil PSI needle to move around like that?
Yes oil psi is dependent on eng rpm
Le canvie la trasmicion dos veces y el camion no enciende
So my truck shutoff in the mountains trying to climb. Reading these comments I believe I was in that same gear range 6-8th gear somewhere & the hsa ovrd light came on n truck shutoff. Then started truck 10mins later n light was gone n started driving. Then when taking an exit keep going to neutral engine brake turn on n off. Im at freightliner and there saying something about a cpc module.
Hi, did you fixed ? Right now I having same problem
@@forestcleaner2322 I have same issue please help me here how do you fix it
@@mafaaz100 turn off power on your truck for 15-20 minute and then you may drive, there’s will be issues with harness and there may be air leak somewhere
@@forestcleaner2322 thanks for replay
How can we fixing
Have you found the issue?
Es el clucht remplasalo ya no tiene agarre se acabo
Mentira.
HEY ALL FOOLS DRIVING SO CALLED DT12 LEARN THE MANUAL TRANSMISSION ALREADY - PROBLEM SOLVED!!!
How does the manual transmission works