Very cool concept. If you're frustrated with the limitations of the recorder module's length in the grid, you should consider using an array module instead. At a max length of 1024, you could record up to 64 bars worth of 16th notes!
Toller Kanal und ich bin überwältigt, was man mit Bitwig alles auf die Beine stellen kann. Seit gestern bin ich stolzer Besitzer 😊 ein großes Danke an deine Free Sachen, die du zur Verfügung stellst! Eine Frage, du hast in deinem Content auf Github etwas über Binaural Beats, hast du da evtl. zu ein Video gemacht? Oder mehr Infos für mich. Ich suche gerade die Möglichkeiten, Binaural Beats Alpha, Beta etc. in Bitwig zu erstellen. Viele Grüße aus Berlin Spandau 😊
Hey thomas, danke dir! schau mal, ich hatte vor 7 monaten mal ein preset gebaut dafür: bit.ly/3yj3CHb Mit dem "beat" knopf kannst du zwischen Alpha/Beta/Delta usw wechseln
@@PolarityMusic Noch eine kurze Frage :-) weißt du zufällig, ob man Midi Clips, die man live einspielen möchte, auf x Bars beschränken kann (festgelegter Loop). Oder geht das nicht? Ich suche mich wund im Internet ;-( VG Thomas
der clip launcher kann nach einer bestimmten länge mit recorden aufhören. Was du suchst ist "post recording action": 1. rechts unten "show project panel" 2. oben "settings" 3. "post record action" auf "play recorded" schalten 4. "post record delay" auf x Bars einstellen. recording hört dann nach x bars auf und spielt das augenommene ab. hoffe das hilft :)
You could use arrays instead of record modules for a much longer sequence. The trick is to have one array which stores when events happen and have that drive all the others
Nice improvement would be to add Scales selection to Pitches. Wouldn't a different number of steps for probability create a sort of polyrhythm for the probability occurring? Looking forward to your eventual release of "101 Musical Note Grids"!
just looked and was slightly surprised ,, it doesn't seem that you can map velocity expression act to midi cc"S YET ? or am I mistaken is there a way ? just watching this made me really want to be able to control hardware using the grid .. that really would be cool ..
I mean, if you need to convert it to CC, you could always modulate a Value module with the velocity and send that Value into a CC Out module. Does that get you what you need? Or am I misunderstanding the issue here?
Have you tried the stock OBS noise reduction? I found this to be the best noise reduction tool in terms of how little artifacts it creates. All other solutions I tried created some kind of audible artifacts.
the integrated ones are speex, which sounds to muffled and RNN which is very good but too clean sometimes. the nvidia options give me a slider at least. i had no problems with nvidia, used it in all of my recent videos, but i guess my gpu update yesterday changed some things :D
Nice to see the shoutout to SIG!! 🙂 If you want to do it in hardware with CV (and your *fingers*!!) head over to Stochastic Instruments!! 🙂
"I promise its going to be simple" and then the signature smirk. Classic.
Yesterdays Lush sounds only took me an hour and half of pausing and following along. Which is so much better than I used to be.
Im a software developer and I love maths. I don’t see any problem with these music making videos 👹
cannot express how much i love these grid videos. I've learned sooo much beyond just grid stuff. ty for all your hard work!
Very cool concept. If you're frustrated with the limitations of the recorder module's length in the grid, you should consider using an array module instead. At a max length of 1024, you could record up to 64 bars worth of 16th notes!
yes! the array is an option
Appreciate your effort with the content 👍
Wow this is so cool, basically this is a great base for generative patch.
Toller Kanal und ich bin überwältigt, was man mit Bitwig alles auf die Beine stellen kann. Seit gestern bin ich stolzer Besitzer 😊 ein großes Danke an deine Free Sachen, die du zur Verfügung stellst! Eine Frage, du hast in deinem Content auf Github etwas über Binaural Beats, hast du da evtl. zu ein Video gemacht? Oder mehr Infos für mich. Ich suche gerade die Möglichkeiten, Binaural Beats Alpha, Beta etc. in Bitwig zu erstellen. Viele Grüße aus Berlin Spandau 😊
Hey thomas, danke dir! schau mal, ich hatte vor 7 monaten mal ein preset gebaut dafür: bit.ly/3yj3CHb Mit dem "beat" knopf kannst du zwischen Alpha/Beta/Delta usw wechseln
@@PolarityMusic Ja, ich habs gerade getestet, genau das, was ich gesucht habe :-) Danke dafür.
@@PolarityMusic Noch eine kurze Frage :-) weißt du zufällig, ob man Midi Clips, die man live einspielen möchte, auf x Bars beschränken kann (festgelegter Loop). Oder geht das nicht? Ich suche mich wund im Internet ;-( VG Thomas
der clip launcher kann nach einer bestimmten länge mit recorden aufhören. Was du suchst ist "post recording action":
1. rechts unten "show project panel"
2. oben "settings"
3. "post record action" auf "play recorded" schalten
4. "post record delay" auf x Bars einstellen.
recording hört dann nach x bars auf und spielt das augenommene ab. hoffe das hilft :)
@@PolarityMusic Danke für die schnelle Rückmeldung, hilft super :-) !!!
You could use arrays instead of record modules for a much longer sequence. The trick is to have one array which stores when events happen and have that drive all the others
Great concept...
Can you explain why the clock is as fast as it is?
Is it possible to create / build a reverse delay & reverb from scratch in bigwig ?
wizard!!! 🧙♂
Nice improvement would be to add Scales selection to Pitches. Wouldn't a different number of steps for probability create a sort of polyrhythm for the probability occurring? Looking forward to your eventual release of "101 Musical Note Grids"!
my merge module wont go further than 2 signal. it stay between 1 and 2 how can i change that ?
in the inspector
just looked and was slightly surprised ,, it doesn't seem that you can map velocity expression act to midi cc"S YET ? or am I mistaken is there a way ? just watching this made me really want to be able to control hardware using the grid .. that really would be cool ..
sure you can use the cc out module
I mean, if you need to convert it to CC, you could always modulate a Value module with the velocity and send that Value into a CC Out module. Does that get you what you need? Or am I misunderstanding the issue here?
@@nai888 I dont know about cc out module im running 3.2.8 maybe that's not available in my older version ?
Is anyone finding that this module seriously squeezes your CPU? I love to use it with acoustic drum machines.
Sounds like two mics were recording this. I can hear mouse clicks and breath-ins atop the voice randomly on left and right channel.
Same here, little bit annoying - I bet it's the artifact of denoising voice recording which is out to stereo instead of mono.
yes its the nvidia noise reduction plugin, which sometimes freaks out for some reason
Have you tried the stock OBS noise reduction? I found this to be the best noise reduction tool in terms of how little artifacts it creates. All other solutions I tried created some kind of audible artifacts.
the integrated ones are speex, which sounds to muffled and RNN which is very good but too clean sometimes. the nvidia options give me a slider at least. i had no problems with nvidia, used it in all of my recent videos, but i guess my gpu update yesterday changed some things :D
i guess i switch back to RNN :D
Well. I get it, this is actually really simple. :))
jo warum ist denn dein atmen so weird in diesem video? es geht irgendwie ovn rechts nach links die ganze zeit, super verwirrend. gute videos sonst. lg
asmr polarity ne, war mein nvidia noise canceling plugin
first)