The perfect tool for creators and streamers? Rode Streamer X
Вставка
- Опубліковано 25 чер 2024
- The Rode Streamer X is a superb device which offers great sound with an XLR microphone, as well as HDMI inputs and throughputs, dual PC streaming setup options and more. It boasts a Revolution pre-amp for great sound and works with Rode Unify (rode.com/en/apps/unify) though I prefer the other option of using SteelSeries Sonar instead. So watch as I show you the best setup options for the Rode Streamer X to make the most out of it, get great sound and open up virtual audio sources you can separate in OBS when streaming and recording.
See my full setup guide on the Streamer X here - • Best settings for the ...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Rode - brandstore.rode.com/products/...
Amazon US - amzn.to/49TtW8J
NewEgg - newegg.io/ncf4ef7afd
Amazon UK - amzn.to/3wUQwPQ
Scan - tidd.ly/3IB4FUL
Amazon FR - amzn.to/3wUCQUT
CaseKing - tidd.ly/4c7Yu8e
Amazon IT - amzn.to/3wSmqMJ
Amazon DE - amzn.to/4aacMU4
Amazon CA - amzn.to/43gelxq
Amazon AU - amzn.to/49QDhxX
Best Buy - bestbuy.7tiv.net/5gEO01
Features of the Rode Streamer X
Professional audio interface, video capture card and control surface integrated in one compact, easy-to-use device
Up to 4K30 video capture and 4K60 pass-through via HDMI
Variable Refresh Rate (VRR) support
Neutrik® combo jack for connecting XLR microphones or instruments, with an ultra-low-noise, high-gain Revolution Preamp™ for pristine audio quality
3.5mm TRRS input for connecting headsets and 1/4-inch headphone output for zero-latency monitoring
Integrated wireless receiver for connecting RØDE Series IV wireless microphones, including the Wireless PRO, Wireless GO II and Wireless ME
Internal DSP for advanced audio processing powered by APHEX®
Four fully customisable SMART pads for triggering sounds, voice effects and MIDI commands
Dual USB-C interfaces for connecting to two computers or consoles
Easy configuration and control via RØDE Central desktop companion app
Compatible with free UNIFY streaming software for advanced audio routing, mixing and configuration
Specs:
Video Input Connectors 1x HDMI Type A 2.0
Video Passthrough Output 1x HDMI Type A 2.0
Max Input Resolutions (HDMI In) 4Kp60 HDR
1440p144 HDR
1080p240 HDR
Variable Refresh Rate Support (VRR) Yes
Max Capture Resolutions 4Kp30
1440p60
1080p120
1080p60 HDR
Audio Input Connectors
1x XLR Combo Jack (Mic/Instrument)
1x Wireless Receiver
1x Input HDMI
Audio Output Connectors 1x 3.5 TRRS Headset Jack (I/O)
1x ¼" Headphone Jack
Input Dynamic Range 113dB
Preamp Noise -131.5dBV (A-weighted)
Frequency Range Microphone Inputs: 20Hz-20kHz
Headphone Output: 20Hz-20kHz
Microphone Input Impedance (Ω) 4KΩ
Instrument Input Impedance (Ω) 1MΩ
Preamplifier Gain Range 0-76dB
Phantom Power Yes
Direct Monitor Yes
Headphone Output Power 125mW per channel
Internal Storage (GB) 2GB (SMART Pads)
Power Requirements Via USB: 5V @ 3A
😍Special Thanks😍
to my UA-cam members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Mike S, Jason Morgan, Starastin, McFarty, Kraken Tortoise, Gaming Nomad, Jay Shank 007, Beaster Bunny, Spandau Guy, Steve Patterson, Chris Thompson, D Shaddix, Hao Vo, Scott Chappelle, Sotong, AuF5guy, Friendly Fire, Elbert McCormick, Fazu Battlecaster, Dureren12,
ONENONLYCASPER, April Nelson, aDam aDamin, MMBGAMING51, toxicslushpuppy and you?
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - the-provoked-prawn.creator-sp...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with amzn.to/3kYrhGP - Ігри
This looks dope! Could def use one of these!
I got sick of the GoXLR letting me down so I’m using Elgato Wave XLR with Shure SM7B. Think I might invest in this box of tricks 👍🏼
My GoXLR has been buggy garbage despite the recent windows 11 update (which was way overdue). Picked this up and the software is miles better, the system is more stable and the pads are much more responsive.
Interesting. I've not used the GoXLR in a while. Thanks for sharing
Thanks for the video. Still want to get the Rodecaster II though, but will be using it for more than myself.
Yeah if you have more than one mic then it makes sense.
Hey Prawn, Is it possible to get direct monitoring with this little gadget?
Here's my take on mine after a couple of months of use so far.
[Hardware]
-Solidly built
-Buttons and knobs feel really good
-Ports are snug
-LED brightness has good range
-Built-in hardware audio effects and processing are top notch
-Pads are immediate when they play sounds/apply voice fx
-Video capture/passthrough is clear and virtually lag free
[Software]
-Having to use two different pieces of software (r0de central/r0de unify) is not super intuitive. I believe over time Unify will be the only software you need, but it's not quite fully implemented yet.
-Unify doesn't have an option to load on startup, so you either have to add it to startup yourself or manually load it everytime.
-Headphone volume keeps resetting to a lower volume after rebooting the computer, but the monitor volume is fine
-Sometimes on reboot, Unify will say it has an update, but there really isn't one. If you choose to update it, it will reset it to default settings for some reason
[Other thoughts]
-When using r0de central, it will show on the led when your mic is peaking and such on the interface. When in unify, it does not
-Unify changes your default system audio input and output every time on reboot. Definitely frustrating if you have other devices you'd rather be using
-Some people might come into this thinking it's a good alternative to something like the Elgato Streamdeck. It is definitely not that even though it does have some similar functionality
-I think over time, the software issues will be worked out, and it'll be more in sync with the hardware. It's definitely a great product with lots of great features.
Thanks for sharing. Unify is not as good as GG for sure, which is why I've been running that instead.
@@TheProvokedPrawn I'm definitely gonna try GG again. Thanks for the heads up!
yet your using it for your dang camera not capture card for your consoles i am using this for the right reason extra capture so many youtubers neve mention that you can hook up on a console like you did . ALSO QUESTION I USE THE WAVE 3 MICROPHONE PEOPLE KEEP TELLING ME THAT I WOULD NOT WORK but since i see it comes with usb c to c cable my friend is using a audio technica xlr one it works i wonder if my theory is correct if my egato wave 3 will work too ? now how do i route wave link too the software ? thats my issuse
Yes it's capable of many things which is great. I'd use it for the camera personally because that's the most useful use case for me but it can be used for console or dual pc setups 👍🏼
Twelfth? Doesn't look right to me lol